| OCR Text |
Show SOUND ANALYTICAL SERVICES, INC. ANAL YTICAL & ENVIRONMENTAL CHEMISTS 4_813;_p;_A...Cm.. . . .;. C. ;.,;HI; ; .G; ;.; HW..; . . . ;AYEAS T;..:.,T....;A_CO .....MA,,;..W_AS...;....;HIN..;;.GT .....O.;..;N9..... 84..; ,2_4_-..; .TE;; ;.;L; ;,; ;EP.; .; H;.; .O.....NE:(..... 25_3)_92_2_-2_3_1O_-_F_AX_:.;..(2_5...;3)_9_22_-_5047 , __ DATA QUALIFIERS AND ABBREVIATIONS B1: This analyte was detected in the associated method blank. The analyte concentration was determined not to be significantly higher than the associated method blank (less than ten times the concentration reported in the blank). B2: This analyte was detected in the associated method blank. The analyte concentration in the sample was determined to be significantly higher than the method blank (greater than ten times the concentration reported in the blank). C: Additional confirmation performed. D: The reported result for this analyte is calculated based on a secondary dilution factor. E: The concentration of this analyte exceeded the instrument calibration range. J: The analyte was analyzed for and positively identified, but the associated numerical value is an estimated quantity. MCL: Maximum Contaminant Level MDL: Method Detection Limit N: See analytical narrative. Not Detected PQL: Practical Quantitation Limit X I: Contaminant does not appear to be "typical" product. Elution pattern suggests it may be X2: Contaminant does not appear to be "typical" product. Further testing is suggested for identification. X3: Identification and, quantification of peaks was complicated by matrix interference; GCIMS confirmation is _ recommended. Sample was re-analyzed with similar results. X4: RPD for duplicates outside advisory QClimits. X4a: RPD for duplicates outside advisory QC limits due to analyte concentration near the method practical quantitation limit/detection limit. X5: Matrix spike was diluted out during analysis. X6: Recovery of matrix spike was outside advisory QC limits. Sample was re-analyzed with similar results. X7: Recovery of matrix spike outside advisory QC limits. Matrix interference is indicated by blank spike recovery data. a: X8: Recovery arid/or RPD values for MSIMSD outside advisory QC limits due to high contaminant levels. Surrogate was diluted out during analysis. ., X9: Surrogate recovery outside advisory QC limits dueto matrix composition. ,-. j_ b _ |
