Filters: Collection:"ir_uspace"
| Creator | Title | Description | Subject | Date | ||
|---|---|---|---|---|---|---|
| 726 |  | Youngkin, Mary E.; Craigle, Valeri; Gregory, Joan M. | Authors and zealots: transforming scholarly communication | Core commitment of the Spencer S. Eccles Health Sciences Library at the University of Utah is to make positive change in scholarly communication and publishing. University faculty are encouraged to participate in Open Access initiatives, and the library offers resources, services, and tools to suppo... | Open Access; Libraries | 2006-10-12 |
| 727 |  | Khan, Malik Murtaza | Auto-tuning for memory hierarchy optimizations in GPUs | 2010-02-26 | ||
| 728 |  | Gesteland, Raymond F.; Ives, Jeffrey T.; Stockham, Thomas G. | Automated film reader for DNA sequencing based on homomorphic deconvolution | An automated reader for electrophoresis based DNA sequencing methods is described that provides fast and accurate sequence determination. Digitized sequencing lanes are processed with homomorphic blind deconvolution in preparation for peak detection, interlane alignment, peak refinement and base cal... | Sequence Analysis; Electrophoresis; Automated Film Reader; Homomorphic Deconvolution | 1994 |
| 729 |  | Pryor, T. Allan | Automated Interpretation of the Mackay-Marg Tonograph by Digital Computer | Biomedical Informatics | 1973 | |
| 730 |  | Brillon, Alicia ; Craigle, Valeri | Automated Library Services: One Law Library's Experience | Article describing implementation of shelf-ready services in the S.J. Quinney Law Library. | 2013-09 | |
| 731 |  | Warner, Homer R. | Automated Transformation of Probabilistic Knowledge for a Medical Diagnostic System | Biomedical Informatics | 1994 | |
| 732 |  | Warner, Homer R. | Automated Transformation of Probablistic Knowledge for a Medical Diagnostic System | Biomedical Informatics | 1994 | |
| 733 |  | Myers, Chris J. | Automatic abstraction for synthesis and verification of deterministic timed systems | This paper presents a new approach for synthesis and verification of asynchronous circuits by using abstraction. It attacks the state explosion problem by avoiding the generation of a flat state space for the whole design. Instead, it breaks the design into sub-blocks and conducts synthesis and veri... | 2000 | |
| 734 |  | Stevens, Kenneth | Automatic addition of reset in asynchronous sequential control circuits | Asynchronous finite state machines (AFSMs) usually require initialization to place them in a desired starting state. This normally occurs by toggling a reset signal upon power-up. This paper presents an algorithm to automatically generate power-up reset circuitry thus adding reset to an AFSM after t... | 2014-01-01 | |
| 735 |  | Gerig, Guido | Automatic and robust computation of 3D medial models incorporating object variability | Abstract. This paper presents a novel processing scheme for the automatic and robust computation of a medial shape model which represents an object population with shape variability. The sensitivity of medial descriptions to object variations and small boundary perturbations are fundamental problems... | 2003-01-01 | |
| 736 |  | Tasdizen, Tolga; Whitaker, Ross T. | Automatic assembly of TEM mosaics and mosaic stacks using phase correlation | This paper discusses automatic Transmission Electron Microscopy (TEM) image registration, TEM slice assembly via tile mosaicking, and TEM volume assembly via slice to slice registration. Several algorithms are presented, including an algorithm for mosaic layout of an unordered set of tiles, an algor... | 2007 | |
| 737 |  | Tasdizen, Tolga; Foster, Norman L. | Automatic classification of alzheimer's desease vs. frontotemporal dementia: a spatial decision tree aprroach with FDG-PET | We introduce a novel approach for the automatic classification of FDG-PET scans of subjects with Alzheimers Disease (AD) and Frontotemporal dementia (FTD). Unlike previous work in the literature which focuses on principal component analysis and predefined regions of interest, we propose the combined... | 2008 | |
| 738 |  | Zhu, Xiaohong | Automatic compensating cleanup operation | Today's part geometries are becoming ever more complex and require more accurate tool path to manufacture. Machining process efficiency is also a major consideration for designers as well as manufacturing engineers. Although the current advanced CAD/CAM systems have greatly improved the efficiency ... | Part geometries | 1989 |
| 739 |  | Gerig, Guido | Automatic corpus callosum segmentation using a deformable active Fourier contour model | The corpus callosum (CC) is a structure of interest in many neuroimaging studies of neuro-developmental pathology such as autism. It plays an integral role in relaying sensory, motor and cognitive information from homologous regions in both hemispheres. We have developed a framework that allows auto... | 2012-01-01 | |
| 740 |  | Myers, Chris J. | Automatic derivation of timing constraints by failure analyis | Abstract. This work proposes a technique to automatically obtain timing constraints for a given timed circuit to operate correctly. A designated set of delay parameters of a circuit are first set to sufficiently large bounds, and verification runs followed by failure analysis are repeated. Each ver... | 2002 | |
| 741 |  | Gooch, Bruce; Shirley, Peter S. | Automatic image creation via artistic composition principles | Methods for choosing image parameters in both art and computer graphics are currently subjective. The choice of parameters results in images of varying quality. One aspect of image quality is the composition of the image. While the principles underlying composition are somewhat subjective, a portion... | Image parameters | 2000 |
| 742 |  | Tasdizen, Tolga | Automatic markup of neural cell membranes using boosted decision stumps | To better understand the central nervous system, neurobiologists need to reconstruct the underlying neural circuitry from electron microscopy images. One of the necessary tasks is to segment the individual neurons. For this purpose, we propose a supervised learning approach to detect the cell membra... | 2009 | |
| 743 |  | Lee, Hyo Jong | Automatic mesh analysis technique by knowledge-based system | The finite element analysis technique has been recognized as a very important tool to solve various engineering problems, such as structural analysis, heat transfer, and fluid dynamics. The key point to the technique is discretization of the domain of interest into many finite elements. A good resul... | Mesh analysis; Mesh generation algorithm | 1989 |
| 744 |  | Shirley, Peter S.; Gooch, Bruce | Automatic painting with economized strokes | We present a method that takes a raster image as input and produces a painting-like image composed of strokes rather than pixels. Unlike previous automatic painting methods, we attempt to use very few brush-strokes. This is accomplished by first segmenting the image into features, finding the medial... | Raster image; Painting-like image; Automatic painting methods | 2000 |
| 745 |  | Brunvand, Erik L. | Automatic rapid prototyping of semi-custom VLSI circuits using actel FPGAs | Abstract : We describe a technique for translating semi-custom VLSI circuits automatically into field programmable gate arrays (FPGAs) for rapid prototyping to develop a system. Using an array multiplier as an example of this translation, the VLSI circuits are designed using a cell-matrix based envi... | 1995 | |
| 746 |  | Smith, Kent F. | Automatic rapid prototyping of semi-custom VLSI circuits using FPGAs | We describe a technique for translating semi-custom VLSI circuits automatically, integrating two design environments, into field programmable gate arrays (FPGAs) for rapid and inexpensive prototyping. The VLSI circuits are designed using a cell-matrix based environment that produces chips with densi... | Semi-custom; VLSI circuits | 1994 |
| 747 |  | Cohen, Elaine | Automatic sculptured five-axis milling with check surfaces | An approach to 5-axis milling of B-spline surfaces is presented. Within its domain, it provides better check surface handling than APT. The scheme for tool position generation is based on a B-spline curve refinement method and a set of criteria for tolerance control which allows the tool positions ... | B-spline surfaces; 5-axis milling; Tool paths | 1989 |
| 748 |  | Fuchs, Henry | The automatic sensing and analysis of 3-D surface points from visual scenes | Described are the design and implementation of a new range-measuring sensing device and an associated software algorithm for constructing surface descriptions of arbitrary three-dimensional objects from single or multiple views. The sensing device, which measures surface points from objects in its ... | Range-measuring; Sensing device | 1976 |
| 749 |  | Stevens, Kenneth; Davis, Alan L. | Automatic synthesis of fast compact self-timed control circuits | We present a tool called MEAT which has been designed to automatically synthesize transistor level. CMOS, self-timed control circuits. MEAT has been used to specify and synthesize self-timed circuits for a fully self-timed 300,000 transistor communication coprocessor. The design is specified using f... | 1993 | |
| 750 |  | Stevens, Kenneth | Automatic synthesis of fast, compact self-timed control | An automated synthesis tool, called the Most Excellent Asynchronous Tool, or MEAT is presented. This tool has been used to specify and synthesize self-timed circuits for a fully self-timed 300,000 transistor communication co-processor. The Specification is done with stylized state diagrams. This is ... | 1992 |