OCR Text |
Show REFERENCES Arand, J. K., Chrisman, L. J. P., Mansour, M. N., Muzio, L. J. (1983). Combustion Evaluation of Residual Fuel Oil From Two-Stage Liquefaction, EPRI-AP-2845. Bauserman, G., Spengler, C. J., Cohn, A. (1980). Combustion Effects of Coal Liquids and Other Synthetic Fuels in Gas Turbine Combustors - Part II: Full Scale Combustor and Corrosion Tests, ASME Pub. No. 80-GT-68. Clark, J. S., Lowell, C. E., Niedzwiecki, R. W., and Nainiger J. J. (1979). Gas Turbine Critical Research and Advanced Technology Support Project: FY 1978. Annual Report, DOE/NASA-2593-79/6 [NASA TM-79139]. Clark, J. S. (1980). Status of the DOE/NASA Critical Gas Turbine Research and Technology Project, D0E/NASA-2593-79/11 [NASA TM- 79307]. Clark, J. S., Hodge, P. E., Lowell, C. E., Anderson, D. N., and Schultz, D. E. (1981). Gas Turbine Critical Research and Advanced Technology Support Project: FY 1979, Annual Report, DOE/NASA-25^3- 24 [NASA TM-81708]. Cohn, A. (1982). Effect of Gas and Metal Temperatures on Gas Turbine Deposition, ASME Pub. No. 82-JPGC-GT-4. Crynes, B. L. (1981). Processing Coal Liquefaction Products, in Chemistry of Coal Utilization, second supplementary volume (M.S. Elliott, ed.), Wiley, New York, Ch. 29. Damle, A. S., Ensor, D. S., Ranade, M. B. (1982). Coal combustion aerosol formation mechanisms - A review, Aerosol Sci. and Technology, 1:119-133. Deadmore, D. L., Lowell, C. E. (1978). Inhibition of Hot Salt by Metallic Additives, D0E/NASA-2593-78/2 [NASA TM-78 966]. Deadmore, D. L., Lowell, C. E. (1979). Airfoil Cooling Hole Plugging by Combustion Gas Impurities of the Type Found in Coal Derived Fuels, D0E/NASA-2593-79/1, [NASA TM-79076]. Deadmore, D. L., Lowell, C. E. (1980). Effects of Impurities in Coal- Derived Liquids on Accelerated Hot Corrosion of Superalloys, D0E/NASA-2593-79/13, [NASA TM-81384]. Deadmore, D. L., and Lowell, C. E. (1980). Fouling and the Inhibition of Ash Corrosion, D0E/NASA-2593-80/14 [NASA TM-81469]. DeCorso, S, M., Vermes, G. (1979). Combustion Turbine Design Guidelines Based on Deposition/Corrision Considerations, ASME Pub. No. 80-GT- 72. 1.5.26 |