|
|
Creator | Title | Description | Subject | Date |
51 |
|
Miller, Jan D. | Selectivity considerations in the amine extraction of gold from alkaline cyanide solutions | It has been discovered that gold can be extracted from alkaline cyanide solution with primary, secondary, and tertiary amines by adding certain Lewis base modifiers, such as organic phosphorus oxides. Under these circumstances, gold can be extracted at about pH 10, commensurate with the pH of cyani... | Gold; Amines; Alkaline cyanide; Extraction | 1984 |
52 |
|
Miller, Jan D. | Critical review of wetting and adhesion phenomena in the preparation of polymer-mineral composites | The wetting behavior of liquid polymers at solid surfaces and the adhesion forces involved at polymer-filler interfaces should always be considered in the preparation of high-quality polymer composites, including those made with mineral fillers. Spontaneous polymer spreading over the filler surface... | Polymer-minerals; Composites; Wetting; Adhesion | 1995 |
53 |
|
Miller, Jan D. | Selective flotation of fossil resin from Wasatch Plateau high-volatile bituminous coal | Certain bituminous coals are known to contain appreciable quantities of natural fossil or subfossil resin. Such resinous coals are found in the western US, particularly the Wasatch Plateau coalfield of UT. Some of the seams in this field contain an average of 5% resin. This fossil resin has been r... | Bituminous coal; Wasatch Plateau; Resin | 1989 |
54 |
|
Miller, Jan D. | Mineral processing fundamentals | The reported claims in several Russian articles that magnetic fields change the viscosity and other basic properties of water and as a result produce beneficial effects such as increased flotation rate, improved grades and recovery, and increased settling rates appear to be unfounded. This conclusi... | Minerals; Processing; Magnetic fields; Metallurgy; Water | 1971 |
55 |
|
Chandran, Ravi | Fracture toughness of two Cr2Hf+Cr intermetallic composites as a function temperature | Fracture toughness as a function of temperature was evaluated for two Cr2Hf+Cr intermetallic composites, each in two different microstructural conditions. The proeutectic microstructures based on Cr-6.5Hf (at%) showed a significant increase in fracture toughness with an increase from room temperatur... | Fracture toughness; Fracture resistance; Intermetallic composites; Proeutectic microstructures; Eutectic microstructures | 1994 |
56 |
|
Miller, Jan D. | Anisotropic character of talc surfaces as revealed by streaming potential measurements, atomic force microscopy, molecular dynamics simulations and contact angle measurements | A study of the interfacial properties of the basal plane and the edge surfaces of talc is described in this paper. The isoelectric points measured at two different crystallographic surfaces by the streaming potential method were found to be similar and exist at about pH 3.0. In the case of the edge... | Talc; Interfacial properties; Hydration; Atomic force microscopy; Molecular dynamics simulations; Edge surface; Basal plane | 2007 |
57 |
|
Miller, Jan D. | Experimental evaluation of a mineral exposure model for crushed copper ores | Copper mineral inclusions dispersed in crushed ore particles have a certain size distribution (grain-size distribution). For efficient heap leaching processes, the crushing plant should be designed and operated to crush the ore to an appropriate particle-size distribution so that copper mineral grai... | Grains; Particles; Distribution | 2006 |
58 |
|
Miller, Jan D. | Development and application of centrifugal flotation systems in wastewater treatment | Flotation as a wastewater treatment technique is designed to remove all particles generally encountered as very fine emulsions, suspended solids, and colloids from wastewater. Historically, Dissolved Air Flotation (DAF) has been used to achieve this removal. More recently, other flotation techniques... | Wastewater treatment; Centrifugal flotation; Liquid cyclone mixing; Hybrid centrifugal dissolved-air flotation; ASH; BAF; GEM; FF | 2007 |
59 |
|
Miller, Jan D. | Role of the hydrocarbon chain in anionic flotation of calcite | The response of calcite to flotation with saturated fatty acids and alkyl sulfonates of various chain lengths is presented. The amount of collector required for flotation is shown to decrease systematically with increasing carbon content from 8 to 12-carbon atoms per molecule. This systematic flot... | Hydrocarbon chain; Calcite; pH (Chemistry); Carbon | 1967 |
60 |
|
Miller, Jan D. | Internal reflection spectroscopy for FTIR analysis of carboxylate adsorption by semi-soluble salt minerals | Flotation chemists have long sought to unravel the mechanisms of carboxylate collector adsorption by semi-soluble salt minerals. In particular, the adsorption density of adsorbed carboxylates, adsorption kinetics, speciation (chemisorbed, physisorbed), orientation, and conformation are of interest.... | Carboxylate collector adsorption; Salt minerals; Internal reflection spectroscopy | 1999 |
61 |
|
Miller, Jan D. | Conformation of chemisorbed oleate at a calcite surface | The surface chemistry of the calcite/oleate flotation system was examined by in situ FT-NIR/IRS. Spectra of combination and overtone bands of aliphatic stretching vibrations revealed gauche/trans conformational changes that occurred solely as a function of temperature. The conformational changes wer... | Chemisorption; Oleate; Calcite; Gauche/trans conformation; Rotational isomerism | 2001 |
62 |
|
Miller, Jan D. | Influence of surfactants on interaction forces between polyethylene surfaces in a hydrocarbon solvent | The polyolefins, mainly polyethylene and polypropylene particles, are used as an active filler material in polymer-polymer blends and are being used for the modification of asphalts to provide for high-load, low-maintenance road construction. The stability of prepared blends depends on the interact... | Surfactants; Asphalt; Polymer; Polyolefins | 2003 |
63 |
|
Miller, Jan D. | Surfactant adsorption density calculation from Fourier transform infrared external reflection spectroscopy (FTIR/ERS) | An equation to calculate surfactant adsorption density from Fourier transform infrared external reflection spectra was established. The derivation and limitation of this equation are discussed in detail. The validation of the FTIR/ERS adsorption density equation was experimentally verified from t... | Surfactant; Adsorption density; Solid film | 2003 |
64 |
|
Miller, Jan D.; Lin, Chen-Luh | Development of a PC, image-based, on-line particle size analyzer | A PC, image-based, on-line instrument for measuring coarse particle size on a conveyor belt is under development. The hardware and software required to implement such a system are discussed, including the interface for the special image-acquisition hardware. The system concept is given with exampl... | | 1993 |
65 |
|
Miller, Jan D. | Atomic force microscopy investigation of interaction forces between polyethylene and asphaltene surfaces | Many petroleum-derived asphalts used for road construction exhibit poor rheological properties. These properties of asphalt can be improved by addition of various polymer fillers to the asphalt blend. Recycled polyolefines, especially polyethylene and polypropylene have been used as the asphalt mo... | Asphalt; Rheology; Polyolefins | 2006 |
66 |
|
Miller, Jan D. | Removal of volatile organic compounds from contaminated water using air-sparged hydrocyclone stripping technology | The air-sparged hydrocyclone (ASH) technology offers the unique opportunity to achieve efficient removal of volatile organic compounds (VOCs) from contaminated water at a high specific capacity, more than 100 times that of conventional air stripping technologies. VOC stripping is the first applicati... | Air-sparged hydrocyclone; Air stripping; Contaminated water | 1997 |
67 |
|
Miller, Jan D. | Structure and composition of commercial copper chelate extractants | The structure, properties, and composition of commercial chelating-type copper extractants are examined. Characterization of these extractants was accomplished using organic separation techniques and analytical tools such as NMR and infrared spectroscopy. Results indicate that only the trans isomer ... | LIX® reagents; stoichiometry; reaction mechanism | 1973 |
68 |
|
Miller, Jan D.; Lin, Chen-Luh | 3D analysis of particulates in mineral processing systems by cone beam X-ray microtomography | In general, x-ray computed tomographic (CT) techniques are able to provide 3D images of the internal structure of opaque materials in a nondestructive manner. The unique cone beam geometry allows acquisition of all 2D projections with only one rotation of the sample thus providing for fast data acqu... | X-ray microtomography; Liberation; Heap leaching; Exposure analysis; Coal washability | 2003 |
69 |
|
Miller, Jan D. | Methodology for detailed liberation analysis in mineral processing technology | A transformation equation can be used to describe the relationship between the one, two and three dimensional information regarding the composition of mineral particles of specified size. Linear or areal grade distributions f(gi) can be transformed to an estimate of the volumetric grade distribution... | Volumetric grade; Grade; Distribution | 1986 |
70 |
|
Miller, Jan D. | Dispersed oil impact on froth stability in flotation | Foam stability in flotation has been studied for more than half of the last century, however, the mechanisms responsible for the defoaming action of many presently used reagents are not completely understood. This research presents oil flotation data, which may be used in the evaluation of aqueous ... | Particles; Defoaming; Surfactants | 2001 |
71 |
|
Miller, Jan D. | Effect of ink types and printing processes on flotation deinking | Examination of ink types reveals that newsprint oil-based offset-cold and offset-heat inks contain substantial oil (45 to 60%) and resin (5 to 35%), water-based ink contains water (40%) and resin (polystyrene, 30%). These inks are liquids with densities around 1 g/cm3, having various viscosities... | Toners; Inks; Photocopying; Laser printing; Flotation; Deinking; Recycling; Office waste; Hyrdophobicity | 1997 |
72 |
|
Miller, Jan D. | Metal ion activation in xanthate flotation of quartz | Quartz cannot be floated with potassium amyl xanthate as collector at any pH. Complete flotation is achieved with certain minimal additions of amyl xanthate and Pbtt from pH 5.8 to 8.5 and with amyl xanthate and Znt+ from pH 7.5 to 8.1. The active species of these metal ions responsible for activ... | pH (Chemistry); Xanthate flotation; Metal ions | 1965 |
73 |
|
Miller, Jan D.; Lin, Chen-Luh | Particle size distribution for copper heap leaching operations as established from 3D mineral exposure analysis by X-ray microCT | The particle size distribution (PSD) for copper heap leaching is an important consideration in the design and operation of any copper heap leaching facility. High-resolution 3D X-ray microtomography (XMT) can be used for the direct determination of the percentage of exposed valuable mineral grains i... | Particle size distribution; Leaching; X-ray microtomography | 2003 |
74 |
|
Dong, Jiawei | Consolidation and permeability of flocculated kaolinite sediment | Vast oil sand resources are located in the province of Alberta, Canada, where water-based oil sands extraction operations are found including extraction and separation of the bitumen from the clay, sand, and water. The production of each barrel of synthetic crude oil (SCO) requires 2 m3 of processe... | Consolidation; Flocculation; Kaolinite; Permeability | 2017 |
75 |
|
Miller, Jan D. | Hydrophobicity and elemental composition of laser-printed toner films | Laser-printed toner films on a polymer support were treated with alkaline (NaOH) aqueous solutions at elevated temperature (80-85° C). These toner films were examined with a sessile-drop contact-angle measurement technique in order to establish the hydrophobicity of the toner surface. Also, X-ray p... | Ink; Fibers; Deinking | 1996 |