You've searched: School Or College: "College of Mines & Earth Sciences" Collection: "ir_uspace"
1 - 25 of 279
Number of results to display per page
CreatorTitleDescriptionSubjectDate
1 Miller, Jan D.Bubble attachment time and FTIR analysis of water structure in the flotation of sylvite, bischofite and carnalliteWater structure is a most important parameter that influences the flotation of soluble salts. In this paper bubble attachment time measurements and FTIR analyses were performed to investigate the effect of water structure on the flotation behavior of sylvite (KCl), bischofite (MgCl2•6H2O) and carn...2010-01-01
2 Miller, Jan D.Selectivity considerations in the amine extraction of gold from alkaline cyanide solutionsIt has been discovered that gold can be extracted from alkaline cyanide solution with primary, secondary, and tertiary amines by adding certain Lewis base modifiers, such as organic phosphorus oxides. Under these circumstances, gold can be extracted at about pH 10, commensurate with the pH of cyani...Gold; Amines; Alkaline cyanide; Extraction1984
3 Reichler, Thomas J.Role of boundary and initial conditions for dynamical seasonal predictabilityThe importance of initial state and boundary forcing for atmospheric predictability is explored on global to regional spatial scales and on daily to seasonal time scales. A general circulation model is used to conduct predictability experiments with different combinations of initial and boundary co...Atmospheric predictions; Seasonal forecasting; Boundary forcing2002
4 Miller, Jan D.Critical review of wetting and adhesion phenomena in the preparation of polymer-mineral compositesThe wetting behavior of liquid polymers at solid surfaces and the adhesion forces involved at polymer-filler interfaces should always be considered in the preparation of high-quality polymer composites, including those made with mineral fillers. Spontaneous polymer spreading over the filler surface...Polymer-minerals; Composites; Wetting; Adhesion1995
5 Miller, Jan D.Selective flotation of fossil resin from Wasatch Plateau high-volatile bituminous coalCertain bituminous coals are known to contain appreciable quantities of natural fossil or subfossil resin. Such resinous coals are found in the western US, particularly the Wasatch Plateau coalfield of UT. Some of the seams in this field contain an average of 5% resin. This fossil resin has been r...Bituminous coal; Wasatch Plateau; Resin1989
6 Zhdanov, MichaelCross-well electromagnetic imaging in three dimensionsIn this paper, we develop a new technique for 3D cross-well electromagnetic tomography, based on an EM borehole survey consisting of a moving vertical magnetic dipole transmitter, located in one or several boreholes, and a tri-axial induction receiver, located in the other boreholes. The method is b...2003
7 Chandran, RaviEvolution of microstructure and phases in in-situ processed Ti-TiB composites containing high volume fractions of TiB whiskersA series of titanium composites, with varying volume fractions of titanium monoboride (TiB) whiskers, were made by mixing various proportions of titanium (Ti) and titanium diboride (TiB2) powders followed by hot pressing. The phases present were identified by x-ray diffraction.Morphology; diffraction; relative intensity1999
8 Miller, Jan D.Study of particle-bubble interaction using atomic force microscopy: current possibilities and challengesStudy of interaction forces between mineral particles and air bubbles is a key to understanding flotation processes. Measurement of such interaction forces has only recently been made possible with the introduction of the atomic force microscope (AFM) and the colloidal probe technique. Using AFM, in...Particle-bubble interaction; Atomic Force Microscopy (AFM); Hydrophobic force; Contact angle; Hydrodynamic force2002
9 Brown, Francis HaroldThe lower Omo basinThe boundaries of the Lower Omo Basin have been mapped by Fuchs (1939) and by Butzer (1970, 1971) in a general way. The structural features and physiography of the eastern and central part of the Lower Omo Basin are best expressed on the maps of Davidson et al. (1973). Walsh and Dodson (1969) have m...1983
10 Miller, Jan D.Hydrophobicity and elemental composition of laser-printed toner filmsLaser-printed toner films on a polymer support were treated with alkaline (NaOH) aqueous solutions at elevated temperature (80-85° C). These toner films were examined with a sessile-drop contact-angle measurement technique in order to establish the hydrophobicity of the toner surface. Also, X-ray p...Ink; Fibers; Deinking1996
11 Miller, Jan D.Fine coal flotation in a centrifugal field with an air sparged hydrocyclonePreliminary results are reported regarding the design and development of a pilot scale air sparged hydrocyclone for cleaning fine coal 590 \xm ("28 mesh) containing 24% ash and 1.6% sulfur. The principle of separation is the flotation of hydrophobic coal particles in the centrifugal field generated...rocyclones; Coal; Separation technology1982
12 Miller, Jan D.Fast flotation with an air-sparged hydrocycloneThe status of the research programme on air-sparged hydrocyclones at the University of Utah is presented. Fast flotation of coal, oil shale, and copper porphyry ore has been demonstrated with capacities far exceeding those of conventional flotation cells. In addition to the performance characteris...Cells; Capacity; Froth1984
13 Chapman, David S.Techniques, analysis, and noise in a Salt Lake Valley 4D gravity experimentRepeated high-precision gravity measurements using an automated gravimeter and analysis of time series of 1-Hz samples allowed gravity measurements to be made with an accuracy of 5 μGal or better. Nonlinear instrument drift was removed using a new empirical staircase function built from multiple ...Gravity measurements2008
14 Chapman, David S.; Harris, Robert N.Stop-go temperature logging for precision applicationsWe describe a new field procedure for stop-go temperature logging of boreholes that attains millikelvin precision. Temperature is recorded continuously throughout the entire log, but the logging probe is held stationary for a fixed time at discrete depth intervals. Equilibrium temperatures at the di...Temperature logging; Boreholes; Stop-go logging method2007
15 Solomon, Douglas KipEvaluating the use of strontium isotopes in tree rings to record the isotopic signal of dust deposited on the Wasatch MountainsDust cycling from the Great Basin to the Rocky Mountains is an important component of ecological and hydrological processes. We investigated the use of strontium (Sr) concentrations and isotope ratios (87Sr/86Sr) in tree rings as a proxy for dust deposition. We report Sr concentrations and isotope r...2014-01-01
16 Miller, Jan D.A new cone beam X-ray microtomography facility for 3D analysis of multiphase materialsThree-dimensional x-ray microtomography offers a unique imaging capability. Spatial resolution on the order of ten microns can be achieved with the use of microfocus x-ray generators. Recently, a state-of-the-art, flexible cone beam x-ray microtomography system has been installed at the University o...2001-01-01
17 Miller, Jan D.High resolution X-ray microtomography based micro finite element analysis of mechanical properties of cellular materialThe macroscopic mechanical (elastic) properties of closed foams (ROHACELL) estimated from micro finite element analysis are reported in this paper. The complex 3D geometries of ROHACELL foams with different densities were analyzed using high resolution X-ray microtomography (HRXMT). The microstructu...2013-01-01
18 Miller, Jan D.; Lin, Chen-LuhScientific visualization in mineral and material processingScientific visualization is an ideal methodology for investigating complex phenomena that are characterized by large amounts of data. Furthermore, it is invaluable in the study of processes that evolve in time. Scientific visualization relies heavily on computer graphics, image processing and video...Air sparged hydrocyclone flotation; Ball mill grinding; Tomography; Computer graphics1993
19 Miller, Jan D.Comparison of process alternatives for gold recovery from cyanide leach solutionsBoth conventional and nonconventional process alternatives for gold recovery from cyanide heap leach solutions are discussed in terms of possible flowsheets. Conventional process alternatives include carbon adsorption and zinc dust precipitation, while nonconventional process alternatives include re...Conventional; Exchange; Flowsheet1984
20 Miller, Jan D.Bench scale flotation of alunite ore with oleic acidAlunite [KA13(SO4)2(OH)6] is a promising non-bauxitic aluminum resource, the domestic reserves of which are estimated to be 800 x 106 tons at 35 percent alunite. The major gangue mineral associated with alunite is quartz. The thermochemical process that has been developed for treatment of this ore...Mesh; Separation; Liberation1980
21 Miller, Jan D.; Lin, Chen-LuhCapillary network model for filter cake based on pore structure analysisDewatering of fine coal by continuous filtration involves filter cake formation and removal of surface moisture by drawing air through the capillaries of the cake. In order to gain a better (understanding of the complex transport phenomena that occur in the filter cake, analysis of the effect of t...Pore geometry; Transport properties; Microtomography1996
22 Zhdanov, Michael S.Fast numerical modeling of multitransmitter electromagnetic data using multigrid quasi-linear approximationMultitransmitter electromagnetic (EM) surveys are widely used in remote-sensing and geophysical exploration. The interpretation of the multitransmitter geophysical data requires numerous three-dimensional (3-D) modelings of the responses of the receivers for different geoelectrical models of comple...Multitransmitter electromagnetic data; Numerical modeling; Multigrid quasi-linear approximation; Quasilinear approximation; geophysical exploration; 3-D modeling2006-06
23 Jewell, PaulControls of tufa development in Pleistocene Lake Bonneville, UtahProminent tufa localities along the Provo level (∼14,000 14C yr B.P.) shoreline in Pleistocene Lake Bonneville have been characterized in detail. Three types of tufa are recognized: capping tufa, beachrock, and capping tufa over beachrock. Capping tufa and beachrock are end members of a continuum ...Tufa; Pleistocene; Pluvial lakes2006
24 Fernandez, Diego P.Formulation for the static permittivity of water and steam at temperatures from 238 K to 873 K at pressures up to 1200 MPa, including derivatives and Debye- Hückel coefficientsA new formulation is presented of the static relative permittivity or dielectric constant of water and steam, including supercooled and supercritical states. The range is from 238 K to 873 K, at pressures up to 1200 MPa. The formulation is based on the ITS-90 temperature scale. It correlates a selec...Static relative permittivity; Dielectric constant1997
25 Miller, Jan D.; Yost, Garold S.; Veranth, John M.Novel method to detect unlabeled inorganic nanoparticles and submicron particles in tissue by sedimentation field-flow fractionationA novel methodology to detect unlabeled inorganic nanoparticles was experimentally demonstrated using a mixture of nano-sized (70 nm) and submicron (250 nm) silicon dioxide particles added to mammalian tissue. The size and concentration of environmentally relevant inorganic particles in a tissue sa...Sedimentation field-flow fractionation; Transmission electron microscopy; Tissue digestion2008
1 - 25 of 279