1 - 25 of 97
Number of results to display per page
CreatorTitleDescriptionSubjectDate
1 Liu, FengPhysical origin of hydrogen-adsorption-induced metallization of the SiC surface: n-type doping via formation of hydrogen bridge bondWe perform first-principles calculations to explore the physical origin of hydrogen-induced semiconductor surface metallization observed in β-SiC(001)-3 x 2 surface. We show that the surface metallization arises from a novel mechanism of n-type doping of surface band via formation of hydrogen bri...Metallization; Hydrogen adsorption; SiC; n-type doping; Hydrogen bridge bond2005-10
2 Eddings, EricModified CPD Model for Coal Devolatilization at UCTT ConditionsTo study coal pyrolysis behavior at underground coal thermal treatment (UCTT) conditions, a modified CPD (M-CPD) model was developed and evaluated using two scales of experiments as well as two different coals, Utah Sufco and Illinois #6. Compared with the original CPD model, three major aspects wer...Coal; pyrolysis; modeling; underground heating2019
3 Gopalakrishnan, GaneshTransaction ordering verification of the PCI 2.1 protocol using trace inclusion refinementWe define an abstract model of PCI, called PCIA, and show that PCI is a refinement of PCIA based on tract inclusion. We then show that no traces of PCIA violate the Producer/Consumer property using the mur? explicit state ennumeration model checker. Given that PCIA does not violate the Producer/Cons...PCI; PCIA; tract inclusion2000
4 Khan, Faisal HabibQuantifying device degradation in live power converters using SSTDR assisted impedance MatrixA noninterfering measurement technique designed around spread spectrum time domain reflectometry (SSTDR) has been proposed in this paper to identify the level of aging associated with power semiconductor switches inside a live converter circuit. Power MOSFETs are one of the most age-sensitive compon...2014-01-01
5 Tiwari, AshutoshManifestation of two-channel nonlocal spin transport in the shapes of Hanle curvesThe dynamics of charge-density fluctuations in a system of two tunnel-coupled wires contains two diffusion modes with dispersion iω = Dq2 and iω = Dq2 + 2τt, where D is the diffusion coefficient and τt is the tunneling time between the wires. The dispersion of corresponding spin-density modes de...2014-01-01
6 Khan, Faisal HabibMaximum power point tracking of stirling generator and ocean wave energy conversion systems using a two-stage power converterWave energy has become one of the most promising renewable energy resources nowadays. By using a linear generator/alternator, the periodic piston motion of the wave energy conversion system (WEC) can be converted to AC voltage with variable RMS amplitude and frequency; this process is comparable to ...2013-01-01
7 Khan, Faisal HabibGenerating isolated outputs in a multilevel modular capacitor clamped DC-DC converter (MMCCC) for hybrid electric and fuel cell vehiclesThis paper presents a new technique to obtain isolated dc voltage outputs from a capacitor clamped dc-dc converter. The multilevel modular capacitor clamped converter (MMCCC) has several key features that make it possible to generate ac outputs (10 kHz) from a dc-dc converter circuit. Using those h...2008-01-01
8 Parker, Steven G.Integrating component-based scientific computing softwareIn recent years, component technology has been a successful methodology for large-scale commercial software development. Component technology combines a set of frequently used functions in a component and makes the implementation transparent to users. Software application developers typically conne...SCIRun; BioPSE; Component technology; Computational steering; Problem solving environment; Distributed computing2006
9 Gale, Bruce K.New approaches to bridge nerve gaps: Development of a novel drug-delivering nerve conduitContemporary bridging techniques for repairing nerve gaps caused by trauma require autologous nerve grafts, which are difficult to harvest and handle and result in significant donor site deficit. Several nerve conduits with axon growth-enhancing potential have been proposed, developed and tested ove...2012-01-01
10 Furse, Cynthia M.Making a world of difference recruitment of undergraduate students at USUThis paper describes two creative methods that are used to recruit undergraduate students at Utah State University. The fmt is "Engineering State", a four day hands-on immersement in a wide array of engineering disciplines, and the second is a slide show called "Making a World of Difference - Women ...Student recruitment; Undergraduate recruitment; Engineering State1999
11 Gopalakrishnan, GaneshVerifying a virtual component interface-based PCI bus wrapper using an LSC-based specificationBecause of the high stakes involved in integrating externally developed intellectual property (IP) cores used in System on Chip (SOC) designs, methods and tool support for quick, easy, decisive standard compliance verification must be developed. Such methods and tools include formal standard spec...System on Chip; SOC; Verification; PCI bus wrapper; LSC2002-01-22
12 Khan, Faisal HabibA high-efficiency modular switched-capacitor converter with continuously variable conversion ratioThe multilevel modular capacitor clamped converter (MMCCC) topology overcomes the difficulties of the multilevel switched capacitor (SC) based dc-to-dc converters in high conversion ratio applications. MMCCC is completely modular and has many other advantageous features. Like most other SC converter...2012-01-01
13 Freire, Juliana; Silva, Claudio T.Towards enabling social analysis of scientific dataFlickr, Facebook, Yahoo! Pipes), which facilitate collaboration and sharing between users, are becoming increasingly popular. An important benefit of these sites is that they enable users to leverage the wisdom of the crowds. For example, in Flickr, users, in a mass collaboration approach, tag ...Social data analysis; Scientific data; Workflows; Provenance; Pipelines; VisTrails2008
14 Smith, Philip J.Soot in combustion simulationsSoot is the dominant source of radiative heat transfer from most practical flames. A review is presented of historical, empirical modelling approaches for estimating heat flux from fires and flames. These historical methods have drawn on empiricism to address the role of soot while seeking methods f...Large eddy simulation; LES; Combustion simulation; Radiative heat transfer; Pool fires2005
15 Khan, Faisal HabibHybrid electric vehicle power management solutions based on isolated and nonisolated configurations of multilevel modular capacitor-clamped converterAbstract-This paper presents the various configurations of a multilevel modular capacitor-clamped converter (MMCCC), and it reveals many useful and new formations of the original MMCCC for transferring power in either an isolated or nonisolated manner. The various features of the original MMCCC circ...2009
16 Harrison, Reid R.Brain-machine interface, unpluggedIn experiments and even limited human clinical trials, electrode arrays implanted on the brain's surface have given monkeys and humans the ability to move objects with their thoughts. The experiments are proof that brain-computer interfaces could improve the lives of severely paralyzed people. But...Wireless neural implants; Brain-computer interface2009-01-01
17 Harrison, Reid R.;Normann, Richard A.Low-power integrated circuit for a wireless 100-electrode neural recording systemIn the past decade, neuroscientists and clinicians have begun to use implantable MEMS multielectrode arrays (e.g., [1]) to observe the simultaneous activity of many neurons in the brain. By observing the action potentials, or "spikes," of many neurons in a localized region of the brain it is possibl...Electrode; Multielectrode arrays (MEA); Neural recording; Low-power circuits; Wireless2006-01-01
18 Akella, VenkateshhopCP: language definition, semantics and examplesWe describe a formalism for high level modeling of hardware based on flow graphs and nonatomic actions called hopCP. A module is the description of a hardware system in hopCP, which contains a flow graph to model the behavioral aspects and ports which represent the communication links. Operations ar...hopCP1990
19 Kirby, Robert MichaelKirby research group2012
20 Harrison, Reid R.;Normann, Richard A.Low-power integrated circuit for a wireless 100-electrode neural recording systemIn the past decade, neuroscientists and clinicians have begun to use implantable MEMS multielectrode arrays (e.g., [1]) to observe the simultaneous activity of many neurons in the brain. By observing the action potentials, or "spikes," of many neurons in a localized region of the brain it is possibl...Neural recording system; Utah Microelectrode Array; Integrated neural interface2007
21 Tasdizen, TolgaSerial section registration of axonal confocal microscopy datasets for long-range neural circuit reconstructionIn the context of long-range digital neural circuit reconstruction, this paper investigates an approach for registering axons across histological serial sections. Tracing distinctly labeled axons over large distances allows neuroscientists to study very explicit relationships between the brain's com...2012-01-01
22 Zhou, XuesongLagrangian relaxation based approach for finding the most reliable path with and without link travel time correlationThis presentation proposes a new method for finding the most reliable path with and without link travel time correlation.Shortest path; Travel time reliability; Link travel time correlation; Lagrangian relaxation2009
23 Sobh, Tarek M.A survey on sensor classifications for industrial applicationsThe importance of sensors in industrial applications is a result of the introduction of many robotics, automation, and intelligent control techniques into factory floors. Research and improvements need to be continuously performed to meet the challenges in automation and manufacturing applications i...Sensor classifications; Industrial applications; Sensors1995
24 Khan, Faisal HabibFabrication processes and experimental validation of a planar PV power system with monolithically embedded power convertersThis paper summarizes the research outcome intended to identify the most suitable device architecture and its implementation for cell-level power conversion in a photovoltaic (PV) system. The fabrication process to accommodate the power conditioning unit with the PV cells using the same process run ...2012-01-01
25 Khan, Faisal HabibAC solar cells: An embedded "all in one" PV power systemPower converters constructed from discrete components are difficult to mass produce, and the installation involves a significant labor cost to have the proper interconnection among the panel, inverter and the grid. These facts indicate that the present PV technology may not be able to address the ch...2012-01-01
1 - 25 of 97