1 - 25 of 44
Number of results to display per page
CreatorTitleDescriptionSubjectDate
1 Using Observed Data During Early Design To Simulate Building Mechanical System Energy PerformanceEnergy Modeling; Real-World Data; Neural Networks2019
2 Predicting fuel consumption for commercial building with machine learning algorithmsThis paper presents a modeling framework that uses machine learning algorithms to make longterm, i.e. one year-ahead predictions, of fuel consumption in multiple types of commercial prototype buildings at one-hour resolutions. Weather and schedule variables were used as model inputs, and the hourly ...Building energy modeling; Machine learning; Prediction; Heating load; Data-driven modeling2017-08
3 Microchannel fluid behavior using micropolar fluid theoryIn this paper, we describe microchannel fluid behavior using a numerical model based on micropolar fluid theory and experimentally verify the model using micromachined channels. The micropolar fluid theory augments the laws of classical continuum mechanics by incorporating the effects of fluid ...1998
4 Novel titania nanotube based electrochemical detection in micrototal analysis systemWe report the modification of titania (TiO2) nanotubes for quantitative electrochemical (EC) detection of biomolecules on a microfluidic platform.Microfluidics; Titania nanotubes; Electrochemical detection2015
5 Micromechanical modeling of high energy compositesHigh-energy polymer-binded explosives (PBXs) are composed of high-energy crystaline particles and a rubbery binder. The volume fraction of particles is approximately 92 percent. The high-energy particles have a Young's modulus that is three orders of magnitude higher than that of the binder. Eff...2000
6 Energy modeling framework for optimizing heat recovery in a seasonal food processing facilitySocietal, cultural and economic factors are driving food processors to reduce energy consumed per unit mass of food. This presents a unique problem because time variant batch processing using low to medium grade heat is common in food production facilities. Heat recovery methods may be implemented b...Energy efficiency; Food industry; Heat recovery; Optimization; Simulation2018-07-20
7 Linking microclimate and energy use with a low cost wall mounted measurement systemUrban microclimate plays a critical role in overall urban energy demand and efficiency. At the building scale, energy use and internal conditions are directly impacted by local microclimate. The direct link between building energy use and local microclimate is through building envelope heat fluxes. ...Microclimate; Energy; Temperature; Humidity; Arduino; EnergyPlus2016-06
8 Deep recurrent neural networks for building energy predictionThis poster illustrates the development of a deep recurrent neural network (RNN) model using long-short-term memory (LSTM) cells to predict energy consumption in buildings at one-hour time resolution over medium-to-long term time horizons ( greater than or equal to 1 week).Machine learning; Energy; Building energy modeling; Deep learning; Recurrent neural networks; Prediction2017-01-13
9 Direct neural sensory feedback and control of a prosthetic armEvidence indicates that user acceptance of modern artificial limbs by amputees would be significantly enhanced by a system that provides appropriate, graded, distally referred sensations of touch and joint movement, and that the functionality of limb prostheses would be improved by a more natural co...Peripheral Nerve Implant; Prosthetic Limb Control; Sensory Feedback2005-12
10 Silicon carbide enhanced thermomigrationThe widespread acceptance of thermomigration technology to produce through-chip interconnects has been impaired by (i) a random walk of the Si-Al liquid eutectic inclusion as it traverses the wafer, and (ii) a ?surface barrier? which allows thermomigration of only relatively large inclusions. In ...Silicon Dioxide; Thermometers; Transducers; Thermomigration Technology; Infrared Lamps1992
11 Applications of microfluidics for molecular diagnosticsDiagnostic assays implemented in microfluidic devices have developed rapidly over the past decade and are expected to become commonplace in the next few years. Hundreds of microfluidics-based approaches towards clinical diagnostics and pathogen detection have been reported with a general theme of ra...Microfluidics; Micro-total-analysis-systems; Lab-on-a-chip; Point-of-care devices; Sample preparation; MEMS; Rapid prototyping; Biomarker detection; Personalized medicine; Global health care2012-11-04
12 The design and implementation of partnetPartNet is a federated database for providing interactive online access to mechanical parts catalogs. The data contained in the vendor's product database is exported to the federated database using a networkbased distributed database protocol. A Single coherent view of these vendor databases is pro...1995
13 Predicting heating demand and sizing a stratified thermal storage tank using deep learning algorithmsThis paper evaluates the performance of deep recurrent neural networks in predicting heating demand for a commercial building over a medium-to-long term time horizon (≥ 1 week), and proposes a modeling framework to demonstrate how these longer-term predictions can be used to aid design of a strati...Building Energy Modeling; Machine Learning; Recurrent Neural Networks; Deep Learning; Heating Load Prediction; Thermal Energy Storage2018
14 Acute peripheral nerve recording characteristics of polymer-based longitudinal intrafascicular electrodesWe examined the recording characteristics of two different types of polymer-based longitudinal intrafascicular electrodes (LIFEs) in peripheral nerve: single-stranded (s-polyLIFEs) and multistranded (m-polyLIFEs). Recordings were also made from Pt-Ir wire-based electrodes (PtIrLIFEs) as a control. T...Sciatic Nerve; Intrafascicular Electrodes, Peripheral Nerve Recording2004
15 Three-dimensional architecture for a parallel processing photosensing arrayA three-dimensional architecture for a photosensing array has been developed. This silicon based architecture consists of a 10 x 10 array of photosensors with 80 microns diameter, through chip interconnects to the back side of a 500 microns thick silicon wafer. Each photosensor consists of a 300 x 3...Retina; Optics; Silicon; Photosensing1992
16 Performance modeling and parametric study of a stratified water thermal storage tankThermal energy storage (TES) can significantly increase the overall effciency and operational flexibility of adistributed generation system. A sensible water storage tank is an attractive option for integration in building energy systems, due to its low cost and high heat capacity. As such, this pap...2016-02-13
17 Coupling of building and vegetation resolving urban microclimate model with a building energy simulation programThe objective of this work is to develop and validate a coupled fast-running Building Energy Modeling/Microclimate model for use in developing site-specific design strategies which minimize energy and water use All the micro-climate variables affecting the building energy consumption, such as solar ...Building energy modeling; Urban; Microclimate; Simulation; Energy; Environment2018-08
18 A three-semester interdisciplinary educational program in microsystems engineeringMotivated by an NSF IGERT grant in the general area of microfluidics, a sequence of three interdisciplinary technical courses has been developed in the emerging area of microsystems engineering. Designed to be taken in series, these courses take students, both graduate and upper-level undergraduates...2004
19 Characterization of a microscale thermal-electrical field-flow fractionation systemA microscale thermal-electrical field-flow fractionation (ThElFFF) channel is reported for the first time and preliminary characterization results show high retention at certain operating conditions including relatively high flow rates when compared to standard microscale electrical or thermal field...2010
20 Examination and analysis of implementation choices within the material point method (MPM)The Material Point Method (MPM) has shown itself to be a powerful tool in the simulation of large deformation problems, especially those involving complex geometries and contact where typical finite element type methods frequently fail. While these large complex problems lead to some impressive si...GIMP; Meshfree methods; Meshless methods; Particle methods; Smoothed particle hydrodynamics; Quadrature2008
21 Mobility performance with a pixelized vision systemA visual prosthesis, based on electrical stimulation of the visual cortex, has been suggested as a means for partially restoring functional vision in the blind. The prosthesis would create a pixelized visual sense consisting of punctate spots of light (phosphenes). The present study investigated the...Visual Prosthesis; Mobility; Phosphene Simulator1992
22 Building academic, research, and commercialization programs in micro and nano science and engineering at the University of UtahAbstract-This paper presents a case-study of some University /Government / Industry interactions at the University of Utah that build research and academic programs and create opportunities fur economic growth in the areas of micro and nanu science and engineering.2003
23 QES-Winds v1.0: Theory and User's GuideA new dispersion modeling system based on the well-used FORTRAN-based QUIC (Quick Urban and Industrial Complex) dispersion modeling system originally developed by the University of Utah and Los Alamos National Laboratory [1], has been under development as collaboration between the University of Utah...2021
24 Evaluation of renewable energy technologies and their potential for technical integration and cost-effective use within the U.S. energy sectorEnergy demands, environmental impacts of energy conversion, and the depletion of fossil; fuels are constant topics of discussion in the energy industry. Renewable energy technologies; have been proposed for many years to address these concerns. However, the transformation; from traditional methods o...Renewable energy; Power generation; Electrical grid; Emerging energy systems; System integration2017-07
25 System scaling approach and thermoeconomic analysis of a pressure retarded osmosis system for power production with hypersaline draw solution: A Great Salt Lake studyOsmotic power with pressure retarded osmosis (PRO) is an emerging renewable energy option for locations where fresh water and salt water mix. Energy can be recovered from the salinity gradient between the solutions. This study provides a comprehensive feasibility analysis for a PRO power plant in a ...Pressure retarded osmosis; Power generation; Renewable energy; Hydroelectric; Levelized cost2017-06
1 - 25 of 44