UScholar Works
 
Filters: Format: "application/pdf" School Or College: "College of Engineering" Collection: "ir_uspace"
301 - 325 of 1,958
Number of results to display per page
CreatorTitleDescriptionSubjectDate
301 Carter, John B.; Davis, Al; Kuramkote, Ravindra; Stoller, Leigh B.Avalanche: A communication and memory architecture for scalable parallel computingAs the gap between processor and memory speeds widens?? system designers will inevitably incorpo rate increasingly deep memory hierarchies to maintain the balance between processor and memory system performance At the same time?? most communication subsystems are permitted access only to main m...Avalanche; Communication architecture; Memory architecture1995
302 Carter, John B.Avalanche: A communication and memory architecture for scalable parallel computingAs the gap between processor and memory speeds widens, system designers will inevitably incorporate increasingly deep memory hierarchies to maintain the balance between processor and memory system performance. At the same time, most communication subsystems are permitted access only to main memory ...Avalanche; Computer memory; Memory architecture1995
303 Stevens, Kenneth; Myers, Chris J.Average-case optimized technology mapping of one-hot domino circuitsThis paper presents a technology mapping technique for optimizing the average-case delay of asynchronous combinational circuits implemented using domino logic and one-hot encoded outputs. The technique minimizes the critical path for common input patterns at the possible expense of making less commo...1998
304 Myers, Chris J.; Stevens, KennethAverage-case optimized technology mapping of one-hot domino circuits*This paper presents a technology mapping technique for optimizing the average-case delay of asynchronous combinational circuits implemented using domino logic and one-hot encoded outputs. The technique minimizes the critical path for common input patterns at the possible expense of making less commo...1998
305 Stark, Michael M.; Martin, William; Cohen, Elaine; Lyche, Tom; Riesenfeld, Richard F.B-splines for physically-based renderingAlthough B-spline curves and surfaces have enjoyed a long established place in the graphics community as constructive modeling tools, the use of B-spline approximation techniques has received relatively little attention in rendering. In this work we explore the use of 4D and 5D tensor product B-s...B-spline curves; Rendering algorithms2002-01-09
306 Lindstrom, Gary E.Backtracking in generalized control settingsBacktracking is a powerful conceptual and practical technique in programming. However, its application in general has been limited to global control over recursive programs. In this paper we explore through several examples the coherence and utility of applying backtracking in more general control s...Backtracking1977
307 Tiwari, AshutoshBand-gap engineering of Zn1-xGaxO nanopowders: synthesis, structural and optical characterizationsWe report the preparation and detailed structural and optical characterizations of single phase gallium doped ZnO nanopowders. A low temperature solution-based technique was developed to synthesize high-purity Zn1−xGaxO (x:0-0.05) nanopowders. Structural and optical characterization experiments we...Zinc gallium oxide; ZnGaO; Nanopowders; Band-gap engineering2008
308 Scarpulla, MichaelBandgap and band offsets determination of semiconductor heterostructures using three-terminal ballistic carrier spectroscopyAmong the most important properties of semiconductors are their bandgaps and how the total bandgap difference distributes between the conduction band offset ΔEC and the valence band offset ΔEV at the heterojunction (HJ) interface between two semiconductors. Understanding such properties is crucial...Bandgaps; Band offsets; Gallium arsenide2009
309 Stringfellow, Gerald B.Bandgap control of GaInP using Sb as a surfactantThe use of surfactants to control specific aspects of the vapor-phase epitaxial growth process is beginning to be studied for both the elemental and III/V semiconductors. To date, most reported surfactant effects for semiconductors relate to the morphology of the growing films. However, semicondu...Band-gap energy; Growth process; Epitaxial growth1999-09-27
310 Stevens, KennethBandwidth optimization in asynchronous NoCs by customizing link wire lengthThe bandwidth requirement for each link on a network-on-chip (NoC) may differ based on topology and traffic properties of the IP cores. Available bandwidth on an asynchronous NoC link will also vary depending on the wire length between sender and receiver. We explore the benefit to NoC performance ...2010
311 Mastrangelo, Carlos H.Batch fabrication of flowable colorimetric pressure sensing particles via surface micromachiningThe batch fabrication and test of artificial optical resonator slab-type micro particles (14 μm diameter, 0.7 μm gap) is presented as a means to map absolute pressure within microscopic environments. The pressure-sensing particles consist of a semi-transparent elastic polysilicon shell enclosi...2010
312 Pershing, David W.Bench and pilot scale process evaluation of reburning for in-furnace NOx reductionThis paper describes a combined experimental and theoretical study which was undertaken to quantify the impact of fuel and process parameters on reburning effectiveness and provide the scaling information required for commercial application of reburning under highly varied industrial conditions. Ini...Reburning; Nitrogen oxides reduction; Staged fuel injection1986
313 Liu, FengBending of nanoscale thin Si film induced by growth of Ge islands: hut vs. domeWe perform atomistic simulations to compute bending of freestanding nanoscale thin Si film induced by strained Ge islands. We show that a larger Ge dome island can induce smaller bending than a smaller hut island and explain the surprising experimental observation for growth of Ge islands on pattern...Bending; Nanoscale thin Si film; Ge islands; Hut islands; Dome islands; Atomistic simulations2004
314 Liu, FengBending of nanoscale ultrathin substrates by growth of strained thin films and islandsMechanical bending is ubiquitous in heteroepitaxial growth of thin films where the strained growing film applies effectively an "external" stress to bend the substrate. Conventionally, when the deposited film is much thinner than the substrate, the bending increases linearly with increasing film th...Nanoscale ultrathin substrates; Strained thin films; Islands; Heteroepitaxial growth; Si substrate; Ge film2005-08
315 Freire, JulianaBeyond depth-first strategies: improving tabled logic programs through alternative schedulingTabled evaluation ensures termination for programs with finite models by keeping track of which subgoals have been called. Given several variant subgoals in an evaluation, only the fi rst one encountered will use program-clause resolution; the rest will resolve with the answers generated by the f...Alternate scheduling; SLG-WAM; Tabled logic programs1998
316 Freire, JulianaBeyond depth-first: improving tabled logic programs through alternative scheduling strategiesTabled evaluations ensure termination of logic programs with fi nite models by keeping track of which subgoals have been called Given several variant subgoals in an evaluation, only the fi rst one encountered will use program clause resolution the rest uses answer resolution This use of answer r...Alternate scheduling; SLG-WAM; Tabled logic programs1996
317 Stringfellow, Gerald B.Bi surfactant control of ordering and surface structure in GaInP grown by organometallic vapor phase epitaxyStudies the effect of the surfactant bismuth on the ordering and surface structure in GaInP layers grown by organometallic vapor phase epitaxy. Disordering caused by the addition of bismuth during growth; Changes in surface structure occurring with the disordering.Thin films, Multilayered; Bismuth2000
318 Stringfellow, Gerald B.; Shurtleff, James KevinBi surfactant effects on ordering in GaInP grown by organometallic vapor-phase epitaxyThe effect of the isoelectronic surfactant Bi on surface structure and ordering has been studied for GaInP semiconductor alloys grown by organometallic vapor-phase epitaxy. A small amount of Bi trimethylbismuth added during growth is found to result in disordering for layers grown using conditions t...Surfactant; Semiconductors; Trimethylbismuth2000
319 Rieth, Loren WBi-layer encapsulation of Utah array based nerual interfaces by atomic layer deposited Al2O3 and parylene CWe present a novel coating method that combines atomic layer deposited Al2O3 and Parylene C for encapsulation of biomedical implantable devices, focusing on its application on Utah electrode array based neural interfaces. The alumina and Parylene C bi-layer encapsulated wired Utah electrode array sh...2013-01-01
320 Hansen, Charles D.Binary-swap and shear-warp volume renderer on the T3DLarge parallel machines give today's scientists the ability to compute very large simulations which may generate equally large data. Not only does having visualization tools on the parallel system allow the scientist to take advantage of the large memory to visualize the data, the processing power a...Volume rendering; Binary-swap1995
321 Hansen, Charles D.Binary-swap volumetric rendering on the T3DThis paper presents a data distributed parallel raytraced volume rendering algorithm and its implementation on the CRI T3D. This algorithm distributes the data and the computational load to individual processing units to achieve fast and high-quality rendering of high-resolution data. The volume dat...Volume rendering; Binary-swap; Ray tracing; Parallel rendering1995
322 Harrison, Reid R.Biologically inspired analog IC for visual collision detectionWe have designed and tested a single-chip analog VLSI sensor that detects imminent collisions by measuring radially expanding optic flow. The design of the chip is based on a model proposed to explain leg-extension behavior in flies during landing approaches. We evaluated a detailed version of thi...Visual collision detection; VLSI2005-11
323 Pershing, David W.Biomass combustion: relationship between pollutant formation and fuel compositionA 65-kW refractory-walled reactor was used to study biomass combustion under conditions typical of the suspension-burning phase in a spreader-stoker-fired boiler. Isothermal combustion data and nitric oxide (NO) emission rates were obtained as a function of temperature, local oxygen concentration, ...Combustion; Emissions; Energy; Environmental control; Fuels; Pyrolysis; Biomass fuel; Particulates1989
324 Furse, Cynthia M.Biomedical telemetry: today's opportunities and challengesBiomedical telemetry is used today to communication with cardiac devices, insulin pumps, and a few other implantable devices that are on the order of 1-2" in diameter. Future systems promise advanced communication with cardiac, optical, neurological and auditory devices that are on the order of a ce...2009-03
325 Johnson, Christopher R.Biomedical visual computing: case studies and challengesAdvances in computational geometric modeling, imaging, and simulation let researchers build and test models of increasing complexity, generating unprecedented amounts of data. As recent research in biomedical applications illustrates, visualization will be critical in making this vast amount of data...2012-01-01
301 - 325 of 1,958