| OCR Text |
Show APPENDIX V Mean Life Errors In general, mean a 1) inaccuracy way: 3) statistical over a and because error be reduced only by delay times, 2) time bias reader) at the film or finite time interval. can may result in any of three distint error in measurement of selection (electronic and life of delays to be finite number of delays a Since (3) collecting a is well larger sample of measured, are analyzed by in the measured Peierls84 data, it will not be discussed here. Inaccuracies in Measurement of Delay Times. A. The time delay between Sl micro-film reader image of the overall measurement Sweep generator and and discuss each Fig. A5.1 circuit diagram of the Tektro 513D A brief description follows. Vl0l and Vl03 tubes Vl04 and the 'grid of city C114 are Vl05. vl06, is then (p. 92, mislabeled only to of Cl14 potential is 84R• the is a experiment. univibrator, and cuts off this tube to initiate the sweep. permitted a charge through R121.1, R122B, C114. to Capa and R139 C114 charges small fraction of the +500 volts at the cathode of Vl07, and a thus its "A.4.1") vl04 is coupled of "until the univibrator recycles and v106 discharges to dvide on separately. for the sweep negative-going plate ultimately We may sweep used in this trigger amplifiers The is measured oscilloscope trace. functionally error. S4 pulses coupled rises to the quite linearly until discharged. The potential A push-pull phase inverter Vl09 through C120. Peierls, Proc. Roy. Soc. (London) A149, 467 (1935) |
