OCR Text |
Show H. Hertz, J . Reine Augew. Math. 92,156(1881). G. P. Huffman and F. E. Huggins, Analysis of the Inorganic Constituents in Low-Rank Coals, H. H. Schobert (Ed.), The Chemistry of Low-Rank Coal, ACS Advances in Chemistry Series, American Chemical Society, Washington DC, pp. 159-174, 1984. F.E. Huggins, D.A. Kosmack, G.P. Huffman, and R.J. Lee, Coal Mineralogies by SEM Automated Image Analysis, Scanning Electron Microscopy 1,531(1980). F.E. Huggins, G.P. Huffman, and R.J. Lee, Scanning Electron MicroscopeBased Automated Image Analysis (SEM-AIA) and Mossbauer Spectroscopy: Quantitative Characterization of Coal Minerals, E.L. Fuller, Jr. (Ed.), Coal and Coal Products: Analytical Characterization Techniques, ACS Symposium Series No. 205, American Chemical Society, Washington, DC, 1982, pp. 239-258. J. F. Kelly, R. J. Lee, and S. Lentz, Automated Characterization of Fine Particulates, Scanning Electron Microscopy 1,311(1980). A.A. Lavasseur, G.J. Goetz, T.C. Lao, and R.L. Patel, The Fundamental Role of Iron in Coal Ash Deposition, Report Prepared for the Electric Power Research Institute by Combustion Engineering, Inc., April 1986. R. J. Lee and J. F. Kelly, Overview of SEM-Based Automated Image Analysis, Scanning Electron Microscopy 1,303(1980). R. J. Lee, F. E. Huggins, and G. P. Huffman, Correlated Mossbauer - SEM Studies of Coal Mineralogy, Scanning Electron Microscopy 1,561(1980). D.O. Loehden, The Formation of Fouling and Slagging Deposits in Pulverized Coal Combustion, S.M. Thesis, Dept. of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 1988. K. C. Mills, Estimation of Phisicochemical Properties of Coal Slags and Ashes, K.S. Vorres (Ed.), Mineral Matter and Ash in Coal, ACS Symposium Series No. 301, American Chemical Society, Washington, DC, 1986, pp. 195- 214. A. K. Moza, L. G. Austin, and G. C. Johnson, Jr., Inorganic Element Analysis of Coal Particles Using Computer Evaluation of Scanning Electron Microscopy Images, Scanning Electron Microscopy 1,473(1979). W.T. Ried and P. Cohen, The Flow Characteristics of Coal-Ash Slags in the Solidification Range, Furnace Performance Factors, Transactions ASME 64,83(1944). P.V. Riboud, Y. Roux, L.-D. Lucas, and H. Gaye, Improvement of Continuous Casting Powders, Fachberichte Huttenpraxis Metal1weiterverarbeitung 19,859(1981). L.N. Rogers and J. Reed, The Adhesion of Particles Undergoing an ElasticPlastic Impact with a Surface, J. Phys. D: Appl. Phys. 17,677(1984). 37 |