American Flame Research Committee
 
Filters: Collection: "uu_afrc" Type: "Text"
26 - 50 of 927
Number of results to display per page
CreatorTitleDateDescription
26 Yahagi, Masahiro; Hase, KojiA Study on Flame Stabilization of a Perforated Porous Plate Burner1994
27 Fangmeier, Bruce A.; Himes, Richard M.; McDannel, Mark D.; Lott, Robert A.; Toole-O'Neil, BarbaraA Summary of Air Toxic Emissions from Natural Gas-Fired Combustion Turbines1994
28 Smith, Philip J.A technology for measuring combustion efficiency of industrial & field flares (integrating measurements and simulations)2011-08-12Flare research over the past decade has increasingly illustrated that there is likely no one simple operational parameter (or even a few parameters) that will characterize the combustion behavior of flare flames.i Simple correlations are unobtainable because of the complexity of the nonlinear mixing...
29 Taylor, Philip H.; Dellinger, BarryA Thermal Stability Based Ranking of Hazardous Organic Compound Incinerability1987
30 Jatale, Anchal; Smith, Philip; Thornock, Jeremy; Smith, SeanA Validation of Flare Combustion Efficiency Simulations2012-09-05
31 Oscar H. Diaz-IbarraA Validation/Uncertainty Quantification (V/UQ) Analysis for a 1.5 MW Oxy-coal Fired L1500 Furnace using a Swirling Boundary Condition2016-09-12Conference Paper
32 Shaw, Henry; Yang, Chen-LuAbsorption of NOx Induced by Sodium Chlorite Oxidation1991
33 Acceptable operating parameters for steam assisted flares at Purge RatesFlare vendors recommend that cooling steam should always be supplied to the steam injection equipment on steam assisted flare tips. However, the nomenclature of "cooling steam" properly describes only one aspect of this steam flow. Not only does this steam provide thermal protection to the steam inj...
34 Kodesh, Zachary; Fox, Scott; Franklin, JamesAccurate and reliable flare testing methods2011-08-30Recently the Texas Commission on Environmental Quality (TCEQ), through The University of Texas (UT) initiated a project utilizing John Zink facilities to better understand the operating envelope of varying flare technologies across various process conditions. A large scale flare testing environment ...
35 Brown, Lynn D.Achieving Ultra-Low Sulfur Levels in Refinery Fuel Gas1991
36 Spellicy, Robert L.Active and passive FTIR monitoring of flare combustion efficiency
37 Industrial Monitor & Control CorporationActive and passive monitoring of flare combustion efficiency2011-09-19
38 Mangal, R.; Mozes, M.; Gaikwad, R.; Thampi, R.; MacDonald, D.Additive Injection for NOx Control1989
39 Mochida, Susumu; Hasegawa, Toshiaki; Tanaka, RyoichiAdvanced Application of Excess Enthalpy Combustion Technology to Boiler Systems1993
40 Morgan, D. J.; Van de Kamp, W. L.Advanced Burners for Coal Fired Boilers1996
41 Dugué, Jacques; Drasek, W. Von; Samaniego, J. M.; Charon, O.; Oguro, T.Advanced Combustion Facilities and Diagnostics1998
42 Widmer, Neil C.; Cole, Jerald A.; Koppang, R.; Gemmer, R. V.; Gensler, WayneAdvanced Diagnostic Evaluation of an Ultra-Low NOx Industrial Gas Burner1995
43 Nutcher, Peter B.; Kolczynski, JoeAdvanced Fluid Bed Combustor for Thermal Disposal of Industrial Wastes1990
44 Advanced Models for Predicting Carbon Burn Out and NOx Formation in Coal Combustion1997
45 Rehmat, Amir ; Khinkis, MarkAdvanced Multipurpose Incinerator1990
46 Chen, S. L.; Lyon, R. K.; Seeker, W. R.Advanced Non-Catalytic Post Combustion NOx Control1990
47 Kramlich, J. C.; Cole, J. A.; Lyon, R. K.; Chen, S. L.; Pershing, David W.Advanced NOx Control With Selective Reduction Agents1988
48 Sullivan, John D.; Pam, R. L.Advanced Radiant Combustion System for High Temperature Petrochemical Process Heaters1992
49 Sullivan, John D.Advanced Radiant Combustion Systems for Petrochemical Process Heaters1994
50 Moyeda, D.; Sheldon, M.; Koppang, R.; Lanyi, M.; Li, X.; Eleazer, B.Advanced Steel Reheat Furnace1997
26 - 50 of 927