American Flame Research Committee
 
Filters: Collection: "uu_afrc"
26 - 50 of 1,104
Number of results to display per page
CreatorTitleDateDescription
26 Marlow, D.; Norton, Thomas S.A Reduced Mechanism for Low-Heating-Value Gas Combustion in a Perfectly Stirred Reactor1995
27 Ouyang, Z.A Study of Flameless Combustion Behavior of Pulverized Coal Preheated by Circulating Fluidized Bed2015-09-11Paper from the AFRC 2015 conference titled A Study of Flameless Combustion Behavior of Pulverized Coal Preheated by Circulating Fluidized Bed.
28 Bunt, Randolph CedricA Study of the Performance of a Compression-Ignition Engine with Modifications to Enhance Atomization Using Alternative Fuels1983
29 Yahagi, Masahiro; Hase, KojiA Study on Flame Stabilization of a Perforated Porous Plate Burner1994
30 Fangmeier, Bruce A.; Himes, Richard M.; McDannel, Mark D.; Lott, Robert A.; Toole-O'Neil, BarbaraA Summary of Air Toxic Emissions from Natural Gas-Fired Combustion Turbines1994
31 Taylor, Philip H.; Dellinger, BarryA Thermal Stability Based Ranking of Hazardous Organic Compound Incinerability1987
32 Diaz-Ibarra, O.A Validation Uncertainty Quantification Analysis of a 1.5 MW Oxy-Coal Fired Furnace2015-09-11Paper from the AFRC 2015 conference titled A Validation Uncertainty Quantification Analysis of a 1.5 MW Oxy-Coal Fired Furnace
33 Jatale, Anchal; Smith, Philip; Thornock, Jeremy; Smith, SeanA Validation of Flare Combustion Efficiency Simulations2012-09-05
34 Oscar H. Diaz-IbarraA Validation/Uncertainty Quantification (V/UQ) Analysis for a 1.5 MW Oxy-coal Fired L1500 Furnace using a Swirling Boundary Condition2016-09-12Conference Paper
35 Diaz-Ibarra, O.H.A Validation/uncertainty Quantification Analysis for a 1.5 MW Oxy-coal Fired L1500 Furnace using a Swirling Boundary Condition2016-09-12Paper from the AFRC 2016 conference titled A Validation/uncertainty Quantification Analysis for a 1.5 MW Oxy-coal Fired L1500 Furnace using a Swirling Boundary Condition
36 Carroll, C.A Wholistic Approach to Enable the Next Era of NOx Reducing Technology in Process Burners2018-09-17Paper from the AFRC 2018 conference titled A Wholistic Approach to Enable the Next Era of NOx Reducing Technology in Process Burners
37 Wheaton, Zachary; Stroh, David; Krishnamoorthy, Gautham; Muhammad, Sami; Orsino, Stefano; Nakod, PravinA comparative study of gray and non-gray methods of computing gas absorption coefficients and its effect on the numberical predictions of oxy-fuel combustionComputational Fluid Dynamics (CFD) simulations are performed to model the radiation process in natural gas fired furnaces using different gray and non-gray radiation models. Simulations of two representative furnace cases (HTAC and OXYFLAM) were performed and the computed radiative fluxes compared w...
38 Atreya, Arvind; Kezerle, James A.A novel method of waste heat recovery from high temperature furnaces to create radiative flameless combustion2009One of the largest heat losses in high temperature furnaces is the loss of flue gas enthalpy. Currently, up to 60% of the heating value of natural gas (or any other fuel) used in high temperature furnaces is lost via the flue gases. This work discusses the benefits and technology of re-circulating t...
39 Smith, Philip J.A technology for measuring combustion efficiency of industrial & field flares (integrating measurements and simulations)2011-08-12Flare research over the past decade has increasingly illustrated that there is likely no one simple operational parameter (or even a few parameters) that will characterize the combustion behavior of flare flames.i Simple correlations are unobtainable because of the complexity of the nonlinear mixing...
40 Kraus, K.AERO Radiant Wall Burner for Ethylene Cracking and Steam Methane Reforming2016-09-13Paper from the AFRC 2016 conference titled AERO Radiant Wall Burner for Ethylene Cracking and Steam Methane Reforming
41 Seebold, James G.AFRC 2008 international flare consortium update2008
42 Seebold, James G.AFRC 2009 international flare consortium update2009
43 AFRCAFRC 2012 Meeting Agenda2012-09-05
44 Shaw, Henry; Yang, Chen-LuAbsorption of NOx Induced by Sodium Chlorite Oxidation1991
45 Acceptable operating parameters for steam assisted flares at Purge RatesFlare vendors recommend that cooling steam should always be supplied to the steam injection equipment on steam assisted flare tips. However, the nomenclature of "cooling steam" properly describes only one aspect of this steam flow. Not only does this steam provide thermal protection to the steam inj...
46 Kodesh, Zachary; Fox, Scott; Franklin, JamesAccurate and reliable flare testing methods2011-08-30Recently the Texas Commission on Environmental Quality (TCEQ), through The University of Texas (UT) initiated a project utilizing John Zink facilities to better understand the operating envelope of varying flare technologies across various process conditions. A large scale flare testing environment ...
47 Smith, J.Achieving Environmental Compliance through Proper Destruction Efficiency of Low-Profile Flare Systems2014-09-08Paper from the AFRC 2014 conference titled Achieving Environmental Compliance through Proper Destruction Efficiency of Low-Profile Flare Systems by J.D. Smith.
48 Gull, W.Achieving Heater Resiliency: The Role of Radiant Tube Support and Stack Damper Performance2017-12-11Paper from the AFRC 2017 conference titled Achieving Heater Resiliency: The Role of Radiant Tube Support and Stack Damper Performance
49 Isaacs, Rex K.Achieving Ultra-Low NOx Emissions in Methanol Downfired Reformer Applications2013-09-24Paper from the AFRC 2013 conference titled Achieving Ultra-Low NOx Emissions in Methanol Downfired Reformer Applications by Rex Isaacs
50 Brown, Lynn D.Achieving Ultra-Low Sulfur Levels in Refinery Fuel Gas1991
26 - 50 of 1,104