|
|
Author | Title | Subject | Date | Publication Type |
| 201 |
 |
Vogt, Andrew Peter | Human stability and the likelihood of falling: a comparison of walking and skiing locomotion | Bioinstrumentation; Bipedal stability; Likelihood of falling; Potential to fall; Skiing locomotion; Walking locomotion | 2013-12 | dissertation |
| 202 |
 |
Jabbarzadeh, Mehdi | Hydrodynamic interactions and motion of bacteria at low reynolds number | Biophysics; Fluid mechanics; Computational physics | 2018 | dissertation |
| 203 |
 |
Stanfield, James Ryan | Hydrodynamics of axial-flow and centrifugal-flow left ventricular assist devices | Hydrodynamics; Mechanical circulatory support; Pressure sensitivity; Pulsatility; Rotary blood pump; Ventricular assist device | 2012-05 | dissertation |
| 204 |
 |
Avula, Mahender nath | Hydrogel based multianalyte microsensor arrays for metabolic monitoring | Biosensor; Continuous glucose monitoring; Hydrogel; Multianalyte microsensor arrays; Metabolic monitoring | 2010-08 | thesis |
| 205 |
 |
Tyler, Thomas R. | Hygroscopic swelling for 4D-fabrication of ionic polymermetal composite soft-Robotic Devices | | 2019 | thesis |
| 206 |
 |
Khan, Mohammad Ahsanuzzaman | Identification and characterization of large, and very Large scale motions in numerically simulated atmospheric boundary layers | Fluid mechanics; Atmospheric sciences; Meteorology | 2018 | dissertation |
| 207 |
 |
Bailey, Brian | The impact of canopy geometry on particle dispersion gradients in sparse agricultural canopies | Epidemiology; Lagrangian particle dispersion modeling; Large-eddy simulation; Plant canopy modeling; Sparse canopies; Fungi in agriculture; Fungi -- Dispersal -- Mathematical models | 2011-05 | thesis |
| 208 |
 |
Lin, Keng-Min | Implantable devices for sensing and drug delivery in ophthalmology and reconstructive surgery | BioMEMS; Intraocular pressure sensor; Medical device; Microfluidics; Nerve conduit; Nerve regeneration | 2014-12 | dissertation |
| 209 |
 |
Hetrick, Andrew | Implementation of kinematic control for a DARPA Urban Challenge vehicle | Autonomous robots | 2010-02-16 | thesis |
| 210 |
 |
Doxon, Andrew John | Improving combined tactile-kinesthetic haptic feedback through haptic shading algorithms and mechanical design constraints | Device design; Haptics; Psycophysical | 2014-05 | dissertation |
| 211 |
 |
Eng, Byron Kasey | Improving convective cooling estimates of photovoltaic modules using atmospheric measurements | | 2019 | thesis |
| 212 |
 |
Fehlberg, Mark Allen | Improving large workspace precision manipulation through use of an active handrest | Adaptive control; Admittance control; Assistive devices; Haptic interfaces; Human performance augmentation; Human robot interaction | 2014-05 | dissertation |
| 213 |
 |
Albonaeem, Mohammed | Improving the efficiency and performance of a thermoacoustic laser powered by pulsed thermal radiation | Microphone Calibration; noise; Solar; TA converter; Thermoacoustic | 2015 | thesis |
| 214 |
 |
Swan, Matthew Scot | Incorporation of a general strain-to-failure fracture criterion into a stress-based plasticity model through a time-to-failure softening mechanism | Fracture; Modeling; Softening | 2012-05 | thesis |
| 215 |
 |
Abbood, Mohanad | Influence of flow rate, air pressure, and nozzle distance on effectiveness of minimum quantity cutting fluid application in machining | | 2018 | thesis |
| 216 |
 |
Christman, Marissa | Influence of hospital bed height on kinematic parameters associated with patient falls during egress | Bed height; Biomechanics; Falls; Kinematics; Mobility; Stability | 2015-03 | thesis |
| 217 |
 |
Moran, Sean | The influence of vegetative windbreaks on fugitive dust (PM10) mitigation and transport flux: the role of turbulence in enhancing particulate deposition | Deposition; Environmental fluid dynamics; Hot-wire anemometry; Turbulence; Wind tunnel | 2012-05 | thesis |
| 218 |
 |
Howell, Adam M. | Insole-based gait analysis | Ankle moment; Force sensitive resistor; Gait analysis; Ground reaction force; Insole; Orthotic | 2012-05 | thesis |
| 219 |
 |
Sonkul, Rahul Subhash | Integrated polymethylmethacrylate - polydimethylsiloxane devices for microfluidic applications | Microfluidics; Polymers | 2009-10-19 | thesis |
| 220 |
 |
Flemming, Leslie James | Intelligent control of shape memory alloy actuator arrays with electric and thermofluidic inputs | Actuator arrays; Graph theory; Optimal control; Shape memory alloys; Thermofluidic | 2012-08 | dissertation |
| 221 |
 |
Adams, Bryan Keith | Interrater reliability of the Utah ergo analyzer | Human engineering; Overuse injuries | 2009-03-10 | thesis |
| 222 |
 |
Nambi, Manikantan | Intuitive telemanipulation of micromanipulators with piezoelectric stick-slip actuators with application in retinal surgery | Haptics; Retinal surgery; Robot-assisted surgery; Stick-Slip Actuators; Teleoperation | 2015 | dissertation |
| 223 |
 |
Johnson, Eric Allen | Investigating inertial measurement for human-scale motion tracking | Accelerometer; Calibration; Gyro; Inertial measurement; MEMS; Motion tracking | 2011-08 | dissertation |
| 224 |
 |
Courteau, Marc A. | Investigating the crashworthiness characteristics of carbon fiber/epoxy tubes | Crashworthiness; Strain rate; Trigger; Carbon fiber/epoxy tubes | 2011-12 | thesis |
| 225 |
 |
Holmes, Heather A | Investigation of chemical properties and transport phenomena associated with pollutants in the atmospheric boundary layer | Air pollution; Atmospheric boundary layer; Atmospheric mercury; Deposition; Dispersion; Particulate matter; Transport phenomena | 2010-12 | dissertation |
| 226 |
 |
Anderson, Rex Nelson | Investigation of coal burning equipment designed to burn Utah coal without the emission of smoke | Smoke prevention; Furnaces | | thesis |
| 227 |
 |
Duke, Otto | Investigation of coal burning equipment designed to burn Utah coal without the emission of smoke | Smoke prevention; Furnaces; Combustion engineering | 1932-05 | thesis |
| 228 |
 |
Andrew, Dallen Lee | Investigation of cold expansion of short edge margin holes with preexisting cracks in 2024-T351 aluminum alloy | AFGROW; Cold expansion; Cold work; Fatigue; Fracture; Precrack | 2011-12 | thesis |
| 229 |
 |
Bagheri, Seyed Amir Mir | Investigation of microorganisms inside the digestive tracts | | 2018 | dissertation |
| 230 |
 |
Tang, Lei | Investigation of near-field radiation-mediated photonic thermal diodes: from theory to experiment | | 2018 | thesis |
| 231 |
 |
Ross, Evan Michael | Investigation of the effect of hole edge margin on fatigue life of cold expanded holes with existing cracks in 2024-T351 aluminum alloy | | 2019 | thesis |
| 232 |
 |
Kallakanti, Mohan Krishna | Kinetic and kinematic evaluation of kneeling work | Kneeling work; Occupational hazard; Osteoarthritis | 2012-12 | thesis |
| 233 |
 |
Quincy, Joshua | Knee biomechanics walking on railroad ballast and the associated risk factors for knee osteoarthritis | Musculoskeletal disorders | 2010-03-12 | thesis |
| 234 |
 |
Margairaz, Fabien | Large-Eddy simulations of the atmospheric boundary layer above heterogeneous land-surface | | 2019 | dissertation |
| 235 |
 |
Marin, Gerard Cortina | Large-eddy simulations of wind farms under different atmospheric stratification conditions | Energy; Sustainability; Engineering | 2018 | dissertation |
| 236 |
 |
Duangmuan, Passakorn | Layer waviness effects on compression strength of composite laminates: progressive failure analysis and experimental validation | Composite laminates; Compression strength; Layer waviness | 2012-05 | dissertation |
| 237 |
 |
Anderson, Biard E.; Mellor, Myron W.; Woodhead, Robert C. | Low temperature carbonization of coal: a solution to the smoke nuisance problem and a method of more fully utilizing the coal resources of the Rocky Mountain Region | Smoke prevention; Coal; Carbonization | 1935-05 | thesis |
| 238 |
 |
Yang, Linfang | Lower extremity ambulatory feedback system for people with amputations gait asymmetry training | Amputation; Gait Feedback Device; Rehabilitation | 2013-05 | thesis |
| 239 |
 |
Leon, Lisandro | Magnetic guidance of cochlear-implant electrode arrays at clinical scale | Applied sciences; Cochlea; Cochlear implant; Hearing loss | 2017 | dissertation |
| 240 |
 |
Padgett, Matthew Ernest | Manufacturing and experimental characterization of copper-wound super-coiled polymer actuators | | 2019 | thesis |
| 241 |
 |
Wadsworth, Paul Randall | Manufacturing bioinspired flexible hierarchical engineered materials for energy applications through integrating ultrasound directed self-assembly and 3D printing | | 2019 | thesis |
| 242 |
 |
Larsen, Mark Raymond | Mechanical fatigue performance of direct-attach, chip-size electronic packages | Chip scale packaging; CSP | 2008-01-04 | thesis |
| 243 |
 |
Johnson, Ryan Christopher | Mesh development of an infant finite element model for predicting skull fracture and intracranial hemorrhage in children from low height falls | Finite element model ; Human head; Infant head; TBI; Mesh development; Model; Numerical grid generation | 2011-12 | thesis |
| 244 |
 |
Whatcott, Gareth D. | Metal hydride themal battery design, lumped capacitance modeling and validity criteria | Battery; Design; Hydide; Metal; Thermal; Validity | 2013-12 | thesis |
| 245 |
 |
Gehrke, Cody Lee | Methods, devices, and apparatus for performing a vascular anastomosis | Anastomosis; Artery; Coupler; Free tissue transfer; Micro surgery; Vascular | 2012-08 | thesis |
| 246 |
 |
Anderson, Eric | Micro charge pump actuation in SUMMiT V MEMS | Microelectromechanical systems; Microactuators | 2008-05 | honors thesis |
| 247 |
 |
Ross, Thomas James | Microelectric discharge machining spindle design | Design; Discharge; Machining; Microelectric; Mill; Spindle | 2014-12 | thesis |
| 248 |
 |
Surapaneni, Rajesh | Microfluidic DNA extraction and quantification using a nanoporous membrane and flow rate analysis | gDNA | 2009-10-30 | thesis |
| 249 |
 |
Samuel, Raheel | Microfluidic research tools for neuroscience | c. elegans; genotyping; microfluidics; microvalves; PDMS; zebrafish | 2014 | dissertation |
| 250 |
 |
Liddiard, Erik | Microfluidic systems for the study of the Caenorhabditis Elegans worm | Caenorhabditis elegans; Microfluidics; Screen; Sort; Worm | 2011-11 | thesis |
| 251 |
 |
Smith, Austin Joseph | Microscale characterization and PLY-Level modeling of transverse fracture in polymer-matrix composites | | 2019 | thesis |
| 252 |
 |
Fathiel, Faisal Abdulazeez | Microscale crossflow heat exchanger fabricated by laser-based xurography | Mems | 2012-12 | thesis |
| 253 |
 |
Torgerson, Daniel Eric | Microscale loss coefficients through expansion and contraction xurographic microchannels | Contraction; Expansion; Microchannel; Microscale; Minor loss; Xurography | 2010 | thesis |
| 254 |
 |
Chanut, Raphael A. | Microstructural characterization of a large selective laser melted inconel 718 build volume | | 2019 | thesis |
| 255 |
 |
Braegger, Ryan B. | Mode I critical strain energy release rate determination for facesheet-core disbonding of sandwich composites | | 2019 | thesis |
| 256 |
 |
Bluth, Zachary D. | Mode II fracture toughness of sandwich composites using the separated end notched flexure test method | | 2019 | thesis |
| 257 |
 |
Merryweather, Andrew S | Model development for the estimation of back compressive force and subsequent low back disorder risk | Backache; Spinal cord compression | 2007-09-10 | thesis |
| 258 |
 |
Bareiss, Daman F | Model-based collision avoidance for dynamic single- and multi-robot systems: theory and application in ground and aerial robots | Collision Avoidance; Mobile Robot; Motion Planning; Multi-Robot | 2016 | dissertation |
| 259 |
 |
Chakravarthy, Shanthanu | Modeling and control for simulated wind in immersive virtual environment | Virtual reality; Wind tunnels | 2009-04-09 | thesis |
| 260 |
 |
He, Xiang | Modeling and control of in-ground-effect on rotorcraft unmanned aerial vehicles | | 2020 | dissertation |
| 261 |
 |
Fallahi, Zahra | Modeling and optimization framework for reducing emissions based on location and timing of electricity use in commercial buildings | | 2019 | dissertation |
| 262 |
 |
Lucich, Stephen M. | Modeling carbon dioxide emissions reductions for three commercial reference buildings in salt lake city | Buildings; energy efficiency; modeling; optimal; photovoltaics | 2015-05 | thesis |
| 263 |
 |
Peck, Jaron Joshua | Modeling power plant cooling water requirements: a regional analysis of the energy-water nexus considering renewable sources within the power generation mix | Cooling; Energy; Plant; Power; Renewable; Water | 2017 | thesis |
| 264 |
 |
Gould, Andrew W. | Momentum and particle transport in a nonhomogenous canopy | Gaussian Plume model; Momentum Transport; Nonhomogenous canopy; Particle releases; Particle Transport; Wind channeling | 2013-04 | thesis |
| 265 |
 |
Byrne, Matthew Patrick | Morphology and mechanics of retinal vasculature in abusive head trauma | | 2018 | thesis |
| 266 |
 |
Flickinger, Daniel Montrallo | Motion planning and coordination of mobile robot behavior for medium scale distributed wireless network experiments | Robots; Control systems; Wireless LANs | 2007-05-16 | thesis |
| 267 |
 |
He, Bang | Multiscale and Multiphysics investigation of fracture in heterogeneous porous media | | 2020 | dissertation |
| 268 |
 |
Jayamohan, Harikrishnan | Nanomaterial based detection and degradation of biological and chemical contaminants in a microfluidic system | Biosensors; Electrochemical Detection; Lab-on-a-chip; Microfluidics; Nanotechnology; Pathogen | 2015-08 | dissertation |
| 269 |
 |
Noble, Brooklyn Ann | Nanoscale mechanics of ultrathin polymer films using molecular dynamics | | 2019 | dissertation |
| 270 |
 |
Petersen, Spencer Justin | Near-field thermal radiative emission of materials demonstrating near infrared surface polariton resonance | Effective medium theory; Electromagnetic metamaterials; Indium tin oxide; Near-field thermal radiation; Surface polariton resonance; Thermophotovoltaics | 2016 | dissertation |
| 271 |
 |
Jensen-Nau, Katharin | Near-Optimal area coverage path planning for an energy constrained autonomous mobile robot: application to autonomous aerial chemical sensing | | 2018 | thesis |
| 272 |
 |
Burghardt, Jeffrey A. | Nonlocal plasticity, instability, and well-posedness of the elastic-plastic initial-boundary value problem | Flow rule; Instability; Material point method; Nonassociated; Nonlocal plasticity; Plasticity | 2011-12 | dissertation |
| 273 |
 |
Zayernouri, Mohsen | Nonparametric approaches to computational sensitivity analysis of turbulent planar shear layers | | 2010 | dissertation |
| 274 |
 |
Poulsen, Robert Parker | Novel model for predicting carpal tunnel syndrome and abnormal nerve conduction | CTS; Abnormal nerve conduction | 2009-06-18 | thesis |
| 275 |
 |
Bernardi, Michael P. | Numerical and experimental techniques for enhanced power generation in a nanoscale-gap thermophotovoltaic device | Mechanical Engineering; Blackbody Limit; Fluctuational Electrodynamics; Nanoscale-Gap Thermophotovoitaic Device; Near-Field Radiation; Power Generation | 2016 | dissertation |
| 276 |
 |
Speckart, Scott | Numerical modeling and field measurement of vehicle-generated road dust transport and removal near the road | Arid; Mitigation; PM10; Turbulence; Vegitation; Windbreak | 2013-12 | dissertation |
| 277 |
 |
Edalatpour, Sheila | Numerical modeling of near-field thermal radiation in complex, three-dimensional and multiscale geometries | Thermal discrete dipole approximation (T-DDA) - Research; Radiative Heat Transfer | 2016 | dissertation |
| 278 |
 |
Hang, Chaoxun | Observational studies of soil moisture, Valley Fog and temperature variance in the atmospheric boundary layer over diverse terrain | Fluid mechanics; Atmospheric sciences; Environmental engineering | 2017 | dissertation |
| 279 |
 |
Shedd, Daniel Francois | Ocular Injury Following Primary Blast Exposure | Ophthalmology; Mechanical engineering; Biomechanics | 2017 | dissertation |
| 280 |
 |
Lefler, Price | Olfactory display for the treadport active wind tunnel | Olfactory display; TreadPort; Wind tunnel; Utah TreadPort Virtual Environment; UUTVE | 2012-08 | thesis |
| 281 |
 |
Tyagi, Rajat | Omni-directional force-feedback for assisted navigation of omni-directional robots | Haptic; Joystick; Omni-Directional; Robots | 2017 | thesis |
| 282 |
 |
Mirmohammad, Seyedhadi | On the sem-based full-field measurement using grid-method for material characterization | | 2019 | thesis |
| 283 |
 |
Kasagani, Vimal Kumar | Optical quantification of hemolysis, icterus, and lipemia in human serum | Hemolysis; Human serum; Icterus; Lipemia; Optical | 2013-12 | thesis |
| 284 |
 |
Liu, Xin | Optical systems to evaluate volume of medical samples in opaque test tubes | Laser diode; Liquid level sensors; Meniscus model; Optics; Optoelectronics; Volume measurement; Medical samples | 2011-08 | dissertation |
| 285 |
 |
Chung, Tak Chi | Optimization of a zebrafish embryo genotyping device | | 2019 | thesis |
| 286 |
 |
Hansen, Michael Christian | Optimization of helical turbine in low head applications | Helical; Turbine | 2011-08 | thesis |
| 287 |
 |
Abu-Khalaf, Jumana M. | Optimization of stretchable fingernail sensor design for fingertip force direction estimation | Fingernail sensor; Optical array; Photoplethysmography | 2012-05 | dissertation |
| 288 |
 |
Deem, Trent H | Osmotic dispense pump for high temperature and pressure applications | Drug infusion pumps; Osmosis | 2008-08 | thesis |
| 289 |
 |
Mondal, Abhijit | Perflexmea: a multielectrode array for cell culture on a thin perforated flexible polycarbonate membrane | Excitable cells; Flexible; Multielectrode array; Perforated; Polycarbonate; PerFlexMEA | 2011-08 | thesis |
| 290 |
 |
Sweeney, Daniel Joseph | Performance of a pilot-scale, steam-blown, pressurized fluidized bed biomass gasifier | Biofuel; Biomass gasification; Fluidized bed; Gasifier tars; Pressure fluctuation measurement; Renewable energy | 2012-12 | dissertation |
| 291 |
 |
Tschaggeny, Charles | Piezoelectric direct drive three axis high precision gimbal (Hierax) | Piezoelectric devices | 2007-11-28 | thesis |
| 292 |
 |
Macon, David James | Plastic cap evolution law derived from induced transverse isotropy in dilational triaxial compression | Applied mechanics; Evolution law; Failure; Fracture; Plastic cap; Transverse isotropy | 2013-05 | thesis |
| 293 |
 |
Holtey, Clinton F | Printed circuit board integrated electrostatically actuated micro pneumatic valve | Microfluidics; Fluid control devices | 2009-11-19 | thesis |
| 294 |
 |
Kesler, Steven R. | Propeller thrust analysis using Prandtl's lifting line theory, a comparison between the experimental thrust and the thrust predicted by Prandtl' lifting line theory | Experiment; Lifting line; Prandtl; Propeller; Theory; Thrust | 2014-08 | thesis |
| 295 |
 |
Hainsworth, Travis Brad | Quadrupedal emotive gaits in robotics | Social research; Mechanical engineering; Robotics | 2017 | thesis |
| 296 |
 |
Lockard, Carly Anne | Quantifying fatigue crack damage in polyethylene tibial inserts of prosthetic knee joints | Fatigue; Finite element; Polyethylene; Tibial insert; Total knee arthroplasty; UHMWPE | 2015-05 | thesis |
| 297 |
 |
Carlson, Scott Spencer | Quantifying the effect of a fatigue crack on the residual stress field induced by the split sleeve cold expansion process in 2024-T351 and 7075-T651 aluminum alloys | Aerospace engineering; Mechanical engineering | 2018 | dissertation |
| 298 |
 |
Price, Michael Robert | Quantifying the protective properties and adhesion to the substrate of ultra-thin multilayer diamond-like carbon coatings using molecular dynamics simulation | Mechanical engineering; Materials science | 2017 | dissertation |
| 299 |
 |
Naylor, Jeffrey Tylyn | Quantitative analysis of trajectory tracking characteristics for a functional human wrist under resistive loads | Engineering Control Metrics; Human Joint Control; Trajectory Tracking; Wrist Control | 2015-05 | thesis |
| 300 |
 |
Phipps, Cristian C | Quasi-static rolling control for hybrid rolling-walking and climbing robots | Robot motion | 2007-11-26 | thesis |
| 301 |
 |
Schmidt, Matthew Grant | Real-time feedback methods for gait rehabilitation through a mobile platform | Android; Feedback; Gait; Insole; Mobile; Real-time | 2013-05 | thesis |
| 302 |
 |
Audd, M. Clay | Reexamination of the edge crack torsion test for measuring mode III delamination toughness in tape-laminated composites | | 2019 | thesis |
| 303 |
 |
Lin, Keng-Min | Refilling mechanism to stabilize a free-floating intraocular capsule drug ring | AMD; CDR; Implant; Intraocular drug delivery; Macular degeneration; Refill | 2011-05 | thesis |
| 304 |
 |
Skinner, Tyson E | Representative job 'building for video analysis completed using the Utah ergonomic analyzer | Human engineering; Health risk assessment | 2008-12 | thesis |
| 305 |
 |
Paranjpe, Avadhoot | Residual stresses in machined titanium (Ti-6Al-4V) alloys | Titanium alloys | 2014-05 | thesis |
| 306 |
 |
Chesebrough, Samuel William | Robot-assisted gait rehabilitation using virtual reality with torso force feedback | | 2018 | dissertation |
| 307 |
 |
Jensen-Segal, Samuel I | ROCR is an oscillating climbing robot: dynamically climbing sheer walls with a pendular two-link mass-shifting robot | Bio-inspired; Brachiation; Climbing robots; Dynamic climbing; Energy efficiency; Mechatronics | 2010-12 | thesis |
| 308 |
 |
Plewe, Kaden Ezra | The role of buildings in a changing environmental ERA: a modeling approach to quantifying and reducing missions | | 2019 | thesis |
| 309 |
 |
Oldroyd, Holly Jayne | Scalar flux measurements in turbulent pipe flow employing combined particle image velocimetry and planar laser induced fluorescence | PIV PLIF; Scalar flux measurements; Scalar transport; Turbulent mixing; Turbulent pipe flow | 2010-08 | thesis |
| 310 |
 |
Jankovich, Philip Martin | Seasonal underground thermal energy storage using smart thermosiphon arrays | Air-conditioning; Heat transfer; Phase change; Thermal energy storage; Thermosiphon arrays | 2012-08 | dissertation |
| 311 |
 |
Sarrazin, John Cody | Sequential growth, regrowth, and control of polypyrrole-metal coil composite artificial muscles | actuator; artificial muscle; biomimetics; polymer; polymeric actuators | 2015-05 | dissertation |
| 312 |
 |
Bowles, Todd Gilbert | Simulating irradiance variability in an urban environment using geographic information systems and quantifying impacts on the energty and economic performance for rooftop photovoltaics | | 2017 | thesis |
| 313 |
 |
Andrews, Nathan F. | Simulating the diurnal cycle of the atmospheric boundary layer using large-eddy simulation with vertical adaptive mesh refinement | Adaptive mesh refinement; Atmospheric boundary layer; Large-eddy simulation | 2012-08 | thesis |
| 314 |
 |
Welborn, Austin Ray | Simulation of diffusion in three unique situations for the novel capsule drug ring | Capsule drug ring; Bevacizumab; Avastin; Retinal degeneration; Macular degeneration; Drug release; Drug delivery systems | 2010-08 | thesis |
| 315 |
 |
Vemparala, Sarvari | Slip, trip, and fall injuries among tractor operators | Fall; Injuries; Slip; Tractor operators; Trip; Farm tractors; Agricultural accidents | 2011-05 | thesis |
| 316 |
 |
Sandstrom, Michael John | The solid particle erosion of tungsten carbide in silicon carbide slurry | Tungsten carbide -- Erosion; Slurry | 2003-12 | thesis |
| 317 |
 |
Samadi, Mohammad Reza Yazdi | Stability analysis of a three-dimensional quadruped trotting robot with passive compliant legs | Robots - Dynamics; Mobile robots; Locomotion | 2012-12 | thesis |
| 318 |
 |
Elliott, Robin James | Stability and metabolic analysis of walking on cross-slopes with various vertically placed backpack loads and without loads | backpack; cross-slope; Stability; Mechanical engineering; Biomechanics | 2016 | dissertation |
| 319 |
 |
Arriscorreta, Carlos A. | Statistical modeling for the corrosion fatigue of aluminum alloys 7075-T6 and 2024-T3 | Aluminum alloys; Corrosion; Fatigue; Intergranular corrosion; Pitting corrosion; 7075-T6; 2024-T3 | 2012-05 | dissertation |
| 320 |
 |
Shorti, Rami M. | Step negotiation biomechanics during truck cab egress and the effects of anthropometrics and cab design on driver fall biomechanics etiology. | Cross-sectional Study; Effects of Anthropometrics; Experimental Study; Falls Biomechanics; Step Negotiation Biomechanics; Truck Cab Egress | 2016 | dissertation |
| 321 |
 |
Seo, Hyoungseock | Stiffness and strength of sandwich beams using glass fiber faces and polyurethane cores | Sandwich construction--Testing | 2004-05 | thesis |
| 322 |
 |
Narra, Gopal | Stress bridging in particulate composites and calculation of G23 in particulate composites | Particulate composites; Stress bridging; High energy materials | 2012-05 | thesis |
| 323 |
 |
Melville, Joseph | Structural damage detection using dictionary learning | Electrical engineering; Mechanical engineering; Computer science | 2017 | thesis |
| 324 |
 |
Parker, David Parel | Structural integrity investigation of the AN/FPS-117 radar and radar tower | Radar; Radar tower | 2014-08 | thesis |
| 325 |
 |
Patharkar, Abhidnya Vijaykumar | Study of change in orientation of adventitial collagen in cerebral blood vessels during and post-axial overstretch | Mechanical engineering; Biomedical engineering; Biophysics | 2018 | thesis |
| 326 |
 |
Hamian, Sina | Subcontinuum thermal transport in tip-based thermal engineering | Ballistic Diffusive Thermal Transport; Full Spectrum Heated Cantilever Characterization; Nanoscale Heat Transfer; Near-Field Force Gradient; Near-Field Thermal Radiation; Scanning Thermal Microscopy (SThM) | 2017 | dissertation |
| 327 |
|
Hamian, Sina | Subcontinuum thermal transport in tip-based thermal engineering | Ballistic Diffusive Thermal Transport; Full Spectrum Heated Cantilever Characterization; Nanoscale Heat Transfer; Near-Field Force Gradient; Near-Field Thermal Radiation; Scanning Thermal Microscopy (SThM) | 2017 | dissertation |
| 328 |
 |
Sullivan, Jacob W. | Subfailure damage mechanics in cerebrovascular injury | Blood vessel; Damage mechanics; MCA; Mechanical properties; Subfailure; TBI | 2013-08 | thesis |
| 329 |
 |
Montemayor, Harvest Media luna | Subterranean thermal energy storage using thermosiphon arrays | alternative heating and cooling; smart thermosiphon; thermosiphon; thermosiphon array | 2015-08 | thesis |
| 330 |
 |
Juturu, Raga Madhuri | Surface integrity in machined aluminum alloys: effects of cutting tool coatings and cooling/lubrication | Aluminum; Coatings; Hole-drilling strain-gage method; Lubrication; Machining; Surface integrity | 2010-06 | thesis |
| 331 |
 |
Sanders, Anthony Paul | Surrogate theory for Hertzian contact pairs: application to simplify wear testing of ceramic hip prosthesis materials | Ceramic; Edge loading; Hip; Prosthesis; Squeaking; Wear | 2012-12 | dissertation |
| 332 |
 |
Romanov, Valentin | Synthesis of lipid vesicles and other biological assays enabled by advanced rapid prototyping techniques | | 2018 | dissertation |
| 333 |
 |
Kamojjala, Krishna C | Systematic code verification and validation of damage in high strength armor materials | Applied sciences; Charpy impact; Damage; Metalic armor; Method of manufactured solutions; Taylor-anvil impact | 2014 | dissertation |
| 334 |
 |
Gleeson, Brian T. | Tactile skin stretch for direction communication | Haptics; Human-computer interaction; Skin stretch; Tactile interface | 2011-05 | dissertation |
| 335 |
 |
Rakurty, Chandrasekhar | Targeted and variable minimum quanitity cutting fluid application for finish machining of steels | | 2019 | dissertation |
| 336 |
 |
Kelsey, William H. | Tests of clay and cement pipes | Pipe, Clay; Cement pipe and tile | 1912 | thesis |
| 337 |
 |
West, Glen Orval | Thermal and phase-change wave propagation and velocities subject to shrinking core phenomena for melting and freezing packed-beds of encapsulated phase-change materials | Mechanical engineering; Thermodynamics; Energy | 2017 | dissertation |
| 338 |
 |
Damacharla, Mallikarjuna Rao | Thermal and structural analyses of the multistage depressed collector of a traveling wave tube | Amplifiers; TWT | 2009-10-26 | thesis |
| 339 |
 |
Jarzembski, Amun | Thermal transport across nanoscale vacuum gaps and the transition to phonon heat conduction | | 2019 | dissertation |
| 340 |
 |
DeSutter, John | Thermophotovoltaic energy conversion: emitter optimization, near-field radiative recombination and near-field radiative heat transfer devices | | 2019 | dissertation |
| 341 |
 |
Christensen, Quinton M. | Three degree of freedom haptic feedback for assisted driving of holonomic omnidirectional wheelchairs | Assistive technology; Control systems; Force feedback; Haptics; Joystick; Omni-directional Wheelchair | 2011-08 | thesis |
| 342 |
 |
Matheson, Kristoffer | Three-dimensional characterization and modeling of open-cell aluminum foams based on X-Ray computed tomography | | 2018 | thesis |
| 343 |
 |
Ragsdale, Victoria Elizabeth | Three-dimensional heat transfer analysis of a disposable, continuous-flow polymerase chain reaction device | Heat transfer; PCR; Continuous-flow; Polymerase chain reaction device | 2012-05 | thesis |
| 344 |
 |
Greenhall, John | Three-dimensional printing engineered materials via integration of ultrasound directed self-assembly with stereolithography | Robotics; Acoustics | 2017 | dissertation |
| 345 |
 |
Carrico, James Douglas | Three-dimensional printing, performance characterization, and machine learning control of ionic polymer-metal composite actuators with applications in Soft Robotics | | 2018 | dissertation |
| 346 |
 |
Dorrian, Edward John | Tool-chip interface temperature in machining: modeling and evaluating the effects of variable flow rate cutting fluid application | Mechanical engineering | 2018 | thesis |
| 347 |
 |
Favaloro, Tony | Toward understanding the sensitivity of the QUIC dispersion modeling system to real input data | Buildings; Atmospheric turbulence | 2008-08 | thesis |
| 348 |
 |
Lincoln, Lucas Samuel | Towards a mobile motion analysis laboratory: improvements in wearable motion capture and force measurement | Gait; Haptics; Kinematics; Optical; Sensor; Tactile; Motion analysis laboratory; Motion capture | 2012-05 | thesis |
| 349 |
 |
Terry, Jared D. | Traction estimation and control for mobile robots using wheel slip velocity | Robots - Motion; Robots - Traction | 2008-12 | thesis |
| 350 |
 |
Miller, Nathan E. | Transport in a trellised agricultural canopy: turbulence and particle dispersion | Canopy Flow; Gaussian plume; Particle Dispersion; Transport; Turbulence; Vineyard | 2017 | dissertation |
| 351 |
 |
Converse, Matthew Israel | Trauma-Induced alterations of cerebral vessel mechanics and microstructure | | 2018 | dissertation |
| 352 |
 |
Yoo, Byungju | Trip/fall potential of walking on railroad ballast | Accidents; Railroad employee injuries | 2009-05-15 | thesis |
| 353 |
 |
Homel, Leora | Ultrasound alignment of a high weight fraction of carbon nanotubes in a polymer matrix | Applied sciences | 2017 | thesis |
| 354 |
 |
Eilertsen, Mark Allen | Unpowered drywall lifting device: characterization of load reduction while lifting drywall in the construction environment | construction; drywall; electromyography; ergonomics; injury | 2016-05 | thesis |
| 355 |
 |
Alston, Joseph D. | Use of a mechanical model to show the benefits of modern anatomical features of homo sapiens for head stabilization during running | Analysis; Anatomy; Dynamics; Evolution; Running; Shoulder; Head stabilization | 2011-05 | thesis |
| 356 |
 |
Brammer, Christopher D. | Using biomechanical analysis and user feedback to evaluate optimal design specifications in lift assist devices | Lift assist devices; Ergonomic; Lift; Passive; Twist; Lifting and carrying -- Equipment and supplies -- Design and construction | 2011-12 | thesis |
| 357 |
 |
Brown, Hunter | Using geometric primitives to unify perception and action for object-based manipulation | Robotics; Artificial intelligence; Computer science | 2018 | thesis |
| 358 |
 |
Nielson, Chad Kirk | Using particle image velocimetry (PIV) to investigate the effects of roughness on confined flow around a hydrofoil | Confined Flow; Fluids; Hydrofoil; Particle Image Velocimetry; PIV; Roughness | 2013-05 | thesis |
| 359 |
 |
Booth, Thomas Michael | Validation of a data assimilation technique for an urban wind model | Assimilation; CFD; Meteorological; MUST; QUIC-URB; Wind; Urban wind model | 2012-05 | thesis |
| 360 |
 |
Fernandes, Clinton | Variable compliant under-actuated leg for quadruped robots | Robotics | 2018 | thesis |
| 361 |
 |
Brewster, Ryan Wallace | Vascular coupling device | Applied sciences | 2017 | thesis |
| 362 |
 |
Li, Huizhong | Vascular coupling device for end-to-end anastomosis | Anastomosis; Blood Vessel; Finite Element Analysis; Medical Device; Microsurgery; Vascular Coupler | 2015-08 | dissertation |
| 363 |
 |
Arbuckle, Troy K. | Velocity-control performance with a fingertip controlled admittance-type haptic device | Admittance Device; Fingertip; Haptics; Robotics; Velocity Control | 2012-12 | thesis |
| 364 |
 |
Austin, David Mark | Verification and validation of a geomodel aimed at simulating wellbore completion via shaped-charge jet perforation of metal and penetration into sandstone | Geomechanics; Hypervelocity; Perforation; Shaped-charge; Solidmechanics; Verification | 2013-12 | thesis |
