|
|
Creator | Title | Date | Description |
226 |
|
Seebold, James G. | Combustion R&D Needs in the Petroleum Refining Industry | 1989 | |
227 |
|
Misra, Mahendra | Combustion Research Needs for Glass Industry | 1996 | |
228 |
|
Richter, Wolfgang ; Kobayashi, Hisashi | Combustion Space Modelling of Oxy-Fuel Fired Glass Melter | 1990 | |
229 |
|
Jain, Ramesh | Combustion System Requirements For Advanced Gas-Fired Processes | 1986 | |
230 |
|
Jain, Ramesh | Combustion System Requirements for Advanced Technologies | 1986 | |
231 |
|
Onoda, Masami; Okimori, Mayumi; Takikawa, Iemitsu; Ikezaki, Eiji; Hiramoto, Yuji | Combustion Techniques in Remote CC-HDR Process | 1991 | |
232 |
|
Pan, Y. S.; Bellas, G. T.; Joubert, J. I. | Combustion Tests with Alternative Fuels in Oil-Designed Boilers | 1981 | |
233 |
|
Khinkis, Mark | Combustion With Oxygen Enriched Air | 1986 | |
234 |
|
Dobos, Charles; Eustes, John | Combustion With Preheated Air Introduction | 1986 | |
235 |
|
Zeuthen, Jacob Hjerrild; Pedersen, Anne Juul; Riber, Christian; Astrup, Thomas; Hansen, Jorn; Frandsen, Flemming Jappe; Livbjerg, Hans | Combustion aerosols from municipal waste incineration - effects of feedstock composition and boiler operation | 2009 | Combustion aerosols were measured in the 22 MWth FASAN Waste-to-Energy (WtE) boiler while applying changes in feedstock composition and grate operation conditions, respectively. The changes in feedstock composition were applied by adding (one-by-one) dedicated waste fractions, comprising PVC plastic... |
236 |
|
Chambers, Allan K.; Wootton, Tony; Moncrieff, Jan; McCready, Philip | Combustion efficiency of full scale flares measured using DIAL technology | 2004 | Flares are used in Alberta's oil and gas industry to safely treat H2S containing gas releases during emergencies, and gas well flow tests and as a means of disposing of gases that cannot be recovered economically. Despite the wide use of these flares, little data exists on the combustion efficiency ... |
237 |
|
Seebold, James G. | Combustion efficiency of industrial flares revisited the current status of this multivariate, multiphysics, multichemistry morass and what to do about it | 2011 | Last year, with its focus on "Industrial Flaring," TOTeM361 was the first in the IFRF TOTeM series to tap into an area which has been explored in AFRC Symposia for many years.2 Taking place 30 September - 1 October at the Sheraton Maui immediately following the AFRC 2010 Pacific Rim Combustion Sympo... |
238 |
|
Gemmer, R. V. | Combustion in the 21st Century | 1996 | |
239 |
|
Koyama, Isao; Okiura, Kunio; Akiyama, Iwao | Combustion of Coal-Water Mixture in Test Furnace | 1983 | |
240 |
|
Mueller, Gary R.; Agrawal, Harshit; Caico, Chris; Olivacce, Ronald | Combustion of mixtures: A modified IFC approach | 2011 | While most studies on flares have been done with single hydrocarbon fuels or binary mixtures, the reality of most industrial flares is that they see different mixtures of many gases. Over the past 5 years the International Flare Consortium (IFC) has been conducting research on just this issue. In a ... |
241 |
|
Turan, A.; Chatwani, A. U.; Loftus, P. J.; Stickler, D. B. | Combustor Modelling - A Maturing State of the Art | 1988 | |
242 |
|
| Commercial Operating Experience with the Rapid Mix Ultra Low Emission Burner | 1998 | |
243 |
|
Barsin, J. A. | Commercialization of Coal-Water Slurries | 1982 | |
244 |
|
Barsin, J. A. | Commercialization of Coal-Water Slurries - II | 1982 | |
245 |
|
Fiveland, W. A.; Morita, Shigeki; Azuhata, Shigeru | Como a Numerical Model for Predicting Furnace Performance in Axisymmetric Geometries | 1983 | |
246 |
|
Hradisky, Michal | Comparison of Local and Global Combustion Efficiencies for the TCEQ 2010 Flare Study Air-Assisted Flare using High Performance Computing | 2013-09-25 | Paper from the AFRC 2013 conference titled Comparison of Local and Global Combustion Efficiencies for the TCEQ 2010 Flare Study Air-Assisted Flare using High Performance Computing by Michal Hradisky. |
247 |
|
Yousheng Zeng | Comparison of Three Methods to Monitor Flare Combustion Efficiency | 2016-09-13 | Conference paper |
248 |
|
Martin, Matthew | Comparison of empirically based calculation methods for pipe flares to computational fluid dynamics | 2007 | As available computational resources increase and the use of computational fluid dynamics (CFD) becomes more widely accepted wider classes of industrial scale combustion systems are being simulated and optimized using these resources. A largebody of empirically based work has already been assembled ... |
249 |
|
Westbrook, Charles K. | Computation of Adiabatic Flame Temperatures and Other Thermodynamic Quantities | 1986 | |
250 |
|
Korhonen, Sirpa; Jacobson, Tommy; Jaakelainen, Kari | Computational Fluid Dynamics Based Analysis of Bubbling Fluidised Bed Combustion | 1998 | |