|
|
Creator | Title | Date | Description |
501 |
|
Hantsck, Carl-Christian; Schorer, Edwin | Flares - noise prediction and thermo-acoustic efficiency | 2004 | In many industries where combustible waste gases are obtained, flares are used to burn these gases in a controlled manner. Among other environmental aspects the noise emissions associated with flaring are becoming increasingly important in many countries as population density goes up and residential... |
502 |
|
Henneke, Mike; Matos, Miguel | Flares in refineries and chemical plants | 2011 | |
503 |
|
Al-Blaies, Wael | Flaring Minimization Programme at Saudi Aramco | 2012-09-05 | |
504 |
|
| Flaring of gas mixtures containing H2S | 2008 | |
505 |
|
Shelil, Nasser; Bagdanavicius, Audrius; Griffiths, Anthony; Syred, Nick | Flashback analysis for hydrogen/methane mixtures for premixed swirl combustion | 2009 | The flashback problem which occurs by using lean premixed combustion in gas turbines is considered. Flashback simulation studies using CFD modelling package are performed for a wide range of hydrogen/methane (H2/CH4) blends combusted by air using a swirl burner under premixed conditions. The laminar... |
506 |
|
Khalil, Essam Eldin | Flow and Combustion Modeling of Vertical Lime Kiln Chambers | 1986 | |
507 |
|
Kishore, N.; de Boer, P. C. T. | Flow Reactor Studies of the Thermal De-NOx Process | 1984 | |
508 |
|
Thompson, R. E.; Goldstick, R. J.; Vogt, R. | Flue Gas Condensation Heat Recovery for Industrial Boilers | 1981 | |
509 |
|
Cooper, Marshall H.; Jahn, Richard K. | Flue Gas Stratification in Industrial and Utility Boilers | 1986 | |
510 |
|
Annamalai, K.; Sweeten, J.; Madan, A.; Park, J. | Fluidized Bed Combustion of Feedlot Manure | 1984 | |
511 |
|
Shang, J. Y.; Mei, J. S.; Notestein, J. E. | Fluidized Bed Combustion of Scrap Tires | 1981 | |
512 |
|
Ayers, W. J. Jr.; Johnson, E. K.; Mei, J. S.; Rice, R. L.; Shang, J. Y. | The Fluidized-Bed Combustion of Char | 1982 | |
513 |
|
Tada, Toshiya; Yaso, Tadashi; Suyari, Mamoru; Kawabata, Hiroaki; Suzuki, Tomio | Fluidized-bed Pyrolysis and Swirl-Flow Melting System for Municipal Solid Waste | 1998 | |
514 |
|
| Forced Draft Burners with Two Stage Fuel System | 1979 | |
515 |
|
Schalles, D. | Forced Draft Firing vs Induced Draft | 2017-12-12 | Paper from the AFRC 2017 conference titled Forced Draft Firing vs Induced Draft |
516 |
|
Chiang, Pen-Chi; You, Jiann-Hwa; Chang, Kun-Ten; Chang, Shenq-Chyi | Formation and Control of PAHs and Mutagenicity of Soot Particulates from Incineration of Polystyrene | 1992 | |
517 |
|
| Fossil Fuel Combustion in an O2 CO2 Medium Preliminary Data From Highvale Coal | 1997 | |
518 |
|
Skinner, John H.; Ondich, Gregory G. | Fostering Innovative Technology Development for Superfund Sites | 1987 | |
519 |
|
Fortino, R. T.; Duqum, J. N.; Petrill, E. M. | Freeboard Combustion and NOx Modeling of a 6x6 Fluidized Bed Combustor | 1985 | |
520 |
|
Petersen, N. | Fuel and CO2 Emission Reductions in Oil and Gas Refining Industry Thermal Oxidizers | 2016-09-12 | Paper from the AFRC 2016 conference titled Fuel and CO2 Emission Reductions in Oil and Gas Refining Industry Thermal Oxidizers |
521 |
|
Nathan Petersen | Fuel and CO2 Emission Reductions in Oil and Gas Refining Industry Thermal Oxidizers | 2016-09-12 | Conference Paper |
522 |
|
Pohl, John; Gogolek, Peter E.G.; Seebold, James G.; Schwartz, Robert | Fuel composition effect on flare flame inefficiency | 2004 | The effects of fuel composition on the performance of flare flames have long been known. Possibly the first performance indicator was the tendency of a fuel to smoke. Various fuel characteristics such as average molecular weight and carbon-to-hydrogen ratio were advanced to guide the design of early... |
523 |
|
Bodelin, P.; Delabroy, O.; Oguro, T.; Drasek, W. Von; Joshi, M. | Fuel Oil Burner Development for High Temperature Melting Applications | 1998 | |
524 |
|
Amin, E. M.; Pourkashanian, Mohamed; Richardson, A. P.; Williams, Alan; Yap, L. T.; Yetter, R. A. | Fuel Preheat as NOx Abatement Strategy for Oxygen Enriched Turbulent Diffusion Flames | 1994 | |
525 |
|
Waibel, R.; Nickeson, D.; Radak, L.; Boyd, W. | Fuel Staging Burners for NOx Control | 1986 | |
526 |
|
Kelly, J. T.; Pam, R. L.; Suttman, S. T. | Fuel Staging for Pulverized Coal Furnace NOx Control | 1982 | |
527 |
|
Frederiksen, Richard D.; Dahm, Werner J.A.; Tryggvason, Gretar; Breen, Bernard P.; Glickert, Roger; Urich, Joseph A.; Pratapas, John M.; Serauskas, Robert V. | Fuel-Lean Gas Reburn (FLGR) Technology for Achieving NOx Emissions Compliance Application to a Tangentially-Fired Boiler | 1998 | |
528 |
|
Eynon, Robert T. | The Fueling of US Industry Into the 21st Century | 1996 | |
529 |
|
Sarv, Hamid; LaRue, Albert D. | Full-Size Characterization of Low-NOx Burner Coal Nozzle Mixing Devices in a 100 MBtu/hr Research Facility | 1995 | |
530 |
|
Wendt, J. O. L.; Linak, William P.; McSorley, Joseph A. | Fundamental Mechanisms Governing Transients From the Batch Incineration of Liquid Wastes in Rotary Kilns | 1987 | |
531 |
|
Akiyama, T.; Ichizen, K.; Yoshimura, Y.; Katsuki, M; Mizutani, Y. | Fundamental Study on Non-Oxidizing Direct Heating Technology | 1991 | |
532 |
|
Lighty, JoAnn S.; Silcox, Geoff D.; Britt, Robert ; Owens, Warren D.; Pershing, David W.; Cundy, Vic A. | Fundamentals of Hazardous Solid Waste Incineration in a Rotary Kiln Environment | 1987 | |
533 |
|
Fiveland, W. A.; Wessel, R. A. | Furmo A Numerical Model for Predicting Performance of Three-Dimensional Pulverized-Fuel Fired Furnaces | 1985 | |
534 |
|
Varga, Gideon M. Jr. | Future Industrial Combustion a Vision of Improved Productivity and Product Quality | 1997 | |
535 |
|
Varga, Gideon M. | Future Industrial Combustion: A Vision and Technology Roadmap for the Combustion Community | 1998 | |
536 |
|
| Future Industrial Combustion: A Vision for the Combustion Community | 1998 | |
537 |
|
Varga, Gideon M. Jr. | Future Industrial Combustion: A Vision of Improved Productivity and Product Quality | 1997 | |
538 |
|
Waterland, L. R.; Mason, H. B.; Gemmer, R. V.; Drennan, Scott A. | Gas Cofiring for Performance Improvement and Emissions Reduction in Stoker Boilers | 1999 | |
539 |
|
| Gas Reburning and Advanced Gas Reburning for Control of NOx Emissions | 1997 | |
540 |
|
Celik, Ismail; Chattree, Mayank | Gas/Particle Residence Time Correlation for an Entrained-Flow Reactor | 1988 | |
541 |
|
Boley, Troy M. Ph.D. | General Overview of Past and Recent EPA Flare Enforcement Actions (and flare assessment techniques) | 2012-09-05 | |
542 |
|
| Glass Industry Combustion Needs Emission Control Technologies | 1997 | |
543 |
|
Menzies, Bill; Sorge, John; Stallings, Jeff | GNOCIS a Tool for Continuous Combustion Optimization of Utility Boilers | 1996 | |
544 |
|
Kilgroe, J. D.; Seeker, W. R.; Lanier, W. S. | Good Combustion Practice and Emission Regulations for Municipal Waste Incineration | 1987 | |
545 |
|
Gemmer, R. V. | GRI Industrial Combustion R&D: Controlling Emissions from Gas-Fired Industrial Processes | 1994 | |
546 |
|
Gemmer, Robert V. | GRI's Industry Combustion R&D Preparing Industry for the Challenges of the Clean Air Act | 1993 | |
547 |
|
McGrath, Thomas P.; Fukuda, M.; Zimperman, R.; England, Glenn C. | Guidelines for Field Characterization of Air Toxics from Petroleum Industry Sources | 1995 | |
548 |
|
Oberg, Tomas; Bergstrom, Jan G. T. | Halogenated Aromatics From Waste Incineration Indicator Parameters | 1987 | |
549 |
|
| HAPs Generation from External Gaseous Hydrocarbon Combustion | 1998 | |
550 |
|
Cegielski, John M. Jr., Ph.D. | Hazardous Waste Fired Steam Generator: A New Concept | 1984 | |
551 |
|
Parekh, Uday N.; Chen, Michael S. K.; Painter, Corning F. | Heat Recovery From Oxy-Fuel Based Glass Melting Processes | 1990 | |
552 |
|
Corliss, John M.; Putnam, Abbott A. | Heat Transfer Enhancement by Pulse Combustion in Industrial Processes | 1986 | |
553 |
|
| Heat transfer enhancement in a cracking furnace: radiant coil modification | 2012-09-06 | |
554 |
|
Clay, Bill; Davidson, Ian; Menniti, Daniel | Heat Transfer Measurement in Power and Process Boiler Furnaces | 1988 | |
555 |
|
Cruz, A. | Heater Recirculation Pattern Analysis and Burner Spacing Optimization | 2015-09-11 | Paper from the AFRC 2015 conference titled Heater Recirculation Pattern Analysis and Burner Spacing Optimization |
556 |
|
Cruz, A. | Heater Recirculation Pattern Analysis and Burner Spacing Optimization | 2016-09-12 | Paper from the AFRC 2016 conference titled Heater Recirculation Pattern Analysis and Burner Spacing Optimization |
557 |
|
Addison Cruz | Heater Recirculation Pattern Analysis and Burner Spacing Optimization | 2016-09-12 | Conference paper |
558 |
|
Wright, Ken; Keller, Michael R. | High Efficiency, Low Emission Marine Vapor Control System | 1993 | |
559 |
|
Panfili, R.; Dothe, H.; Vujkovic-Cvijin, P.; Tan, X.; Kennett, R.; Taylor, R.; Bernstein, L.; Smith, Philip J.; Thornock, J.N.; Gross, K.; Seebold, J. G. | High fidelity modeling of flare combustion and emission detection | 2011-08-17 | The combustion of hydrocarbons by industrial flares emits greenhouse gases into the atmosphere along with trace amounts of ozone-forming highly-reactive volatile organic compounds and human carcinogens. Continuous and autonomous monitoring of flare emission is challenging due to low species concentr... |
560 |
|
Matsui, Kouichi | High Performance Cyclonic Burner for Process Heaters and Firetube Boilers | 1997 | |
561 |
|
Fujisaki, Wataru; Nakamura, Tsuneaki | High Radiative Low NOx Flat Flame Oxy-Fuel Burner | 1998 | |
562 |
|
Tsang, Wing | High Temperature Chemical and Thermal Stability of Chlorinated Benzenes | 1987 | |
563 |
|
Hasegawa, Toshiaki; Tanaka, Ryoichi; Kishimoto, Ken | High Temperature Excess Enthalpy Combustion for Efficiency Improvement and NOx Abatement | 1994 | |
564 |
|
Gretsinger, Ken | High Uniformity Heating Theory and Practice | 1997 | |
565 |
|
Pearson, D. | How to Measure Flare Vent Gas Composition and Net Heating Value | 2015-09-10 | Paper from the AFRC 2015 conference titled How to Measure Flare Vent Gas Composition and Net Heating Value |
566 |
|
Bell, Ronald D. | Hybrid Low NOx Process for Destruction of Bound Nitrogen Compounds | 1993 | |
567 |
|
| Hybrid Low NOx Process for Destruction of Bound Nitrogen Compounds | 1998 | |
568 |
|
Miller, D. | Hydrogen and syngas flares-comparison between experimental data and model predictions | 2014-09-08 | Paper from the AFRC 2014 conference titled Hydrogen and Syngas Flares-comparison Between Experimental Data and Model Predictions by Derek Miller. |
569 |
|
Walsh, Peter M.; Moyeda, David K.; Lanier, W. Steven; Booth, C. Michael; Folk, E. E. (Gary); Maxwell, ?John; Whitcraft, Wilfred K.; Noble, Roger K.; Clopton, Jeff M.; Rogers, Tracy; Nicely, Chris; Rosensteel, Robert E.; Miller, C. Andrew | Hydrogen flares: the DuPont-EER-EPA test program, amendment of the EPA requirements, and related developments | 2010-09-30 | |
570 |
|
Panfili, R.; Vujkovic-Cvijin, P.; Tan, X.; Kennett, R.; Taylor, R.; Dothe, H.; Bernstein, L. | Hyperspectral Modeling of Combustion Flare Emissions | 2012-09-05 | |
571 |
|
Ling, S. C.; Pao, H. P. | Ideal Combustion of Solid Fuels | 1988 | |
572 |
|
Flynn, T.J. | Identifying Sources of Thermoacoustic Vibrations in Industrial Furnaces and Boilers | 2018-09-18 | Paper from the AFRC 2018 conference titled Identifying Sources of Thermoacoustic Vibrations in Industrial Furnaces and Boilers |
573 |
|
Gogolek, Peter E.G. | The IFC Literature Review | | |
574 |
|
Gogolek, Peter | The IFC literature review | 1983 | |
575 |
|
Roberts, Peter | IFRF Report Research and Technical Development | 1991 | |
576 |
|
Sharman, P. | The IFRF- Past, Present, and Future | 2017-12-11 | Paper from the AFRC 2017 conference titled The IFRF- Past, Present, and Future |
577 |
|
Phuoc, T. X.; Durbetaki, P. | Ignition Modes of PMMA Under Convective Heating | 1985 | |
578 |
|
Adams, B. | Impact of High-Emissivity Coatings on Process Furnace Heat Transfer | 2014-09-10 | Paper from the AFRC 2014 conference titled Impact of High-Emissivity Coatings on Process Furnace Heat Transfer by B. Adams. |
579 |
|
Veranth, John M.; Fletcher, Thomas H.; Pershing, David W.; Sarofim, Adel F. | Impact of Low NOx Firing Conditions on Unburned Carbon Losses | 1998 | |
580 |
|
Havener, John; Terhune, Keith | Implementation of a Software CEM for NOx Emissions Monitoring | 1993 | |
581 |
|
Platvoet, Erwin | Improved Burner Air Inlet Design & Control | 2013-09-24 | Paper from the AFRC 2013 conference titled Improved Burner Air Inlet Design & Control by Erwin Platvoet |
582 |
|
Singh, Shyam N.; Yokosh, Steven ; Briselden, Tom ; Singh, Shiw S. | Improved Combustion Thermal Efficiency With Compact Recuperator Design | 1986 | |
583 |
|
Diez, Francisco J.; Dahm, Werner J.A. | Improved prediction of buoyancy effects on flame length and combustion properties of flares | 2004 | An improved integral method is presented for determining the flame length and combustion properties of buoyant jet flames, including flares, that avoids the Morton entrainment hypothesis entirely and thereby removes the ad hoc "entrainment modeling" required in most other integral approaches. Rather... |
584 |
|
Wakamura, Yasujiro | Improvement of Ash Surface-Melt Furnace and Utilization of the Slag | 1997 | |
585 |
|
Okada, Seiji; Suzuki, Yutaka; Kaminaka, Motofumi | Improvement of Reducing Flame Burner with Oxygen Enrichment | 1998 | |
586 |
|
Shore, David | Improving flare design a transition from art-form to engineering science | 2007 | Many of the day-to-day activities surrounding Flaring, at both the project design and operational stages, are vague and apparently outside the control of the Flare Engineer. Design specifications usually only cover a single case out of a multitude of possible compositions and flows. In service, flow... |
587 |
|
Cremer, Marc; Adams, B. R.; Heap, M. P.; Smith, Philip J.; Brown, D. J. | Improving the Performance of Process Heaters Through Fireside Modeling | 1997 | |
588 |
|
Holve, D. J. | In Situ Particle Counting for Research and Industry | 1983 | |
589 |
|
Darroch, Michael; Laflesh, Richard; Hart, Douglas J.; Jennings, Patrick L. | In-Furnace Low NOx Solutions for Wall-Fired Boilers | 1991 | |
590 |
|
Annen, K.; Goodwin, W.; Stewart, G.; Nelms, C. | In-Situ Size Measurements in an Industrial Boiler | 1983 | |
591 |
|
Ohyashiki, Takuya; Itaya, Yoshinori; Matsuda, Hitoki; Hasatani, Masanobu | Incineration Behavior of Waste Liquid with Methane-Air Combustion in Triple Coaxial Tube Incinerator and Emissions of Exhaust Gas | 1998 | |
592 |
|
Cundy, V. A.; Senser, D. W. | The Incineration Characteristics of DichloromethaneThe Incineration Characteristics of Dichloromethane (CH2Cl2) | 1984 | |
593 |
|
Acharya, Prakash, P.E. | Incineration of Hazardous Waste in a Mobile System | 1984 | |
594 |
|
Steeper, R. R.; Sorbo, N. W.; Chang, D. P. Y.; Law, C. K. | Incineration of Liquid Hazardous Wastes: Vaporization Combustion of Droplets of Chlorinated Hydrocarbons | 1987 | |
595 |
|
Bhan, Roop | Incineration of Nitrogen-Bearing Wastes | 1991 | |
596 |
|
Bergstrom, Jan G. T.; Oberg, Tomas | Incineration of PCB and Other Hazardous Wastes | 1987 | |
597 |
|
Kurek, Harry S.; Kune, Vladimir; Chudnovsky, Yaroslav P.; Touzet, Antonin; La Faire, Antoine de; Landais, Thierry; Erinov, Anatoly E.; Semernin, Aleksei M. | Indirect Fired Flat Radiant Panels | 1997 | |
598 |
|
Krill, Wayne V.; Pam, Rick | Industrial Applications of the Pyrocore Burner | 1986 | |
599 |
|
Whelan, M. | Industrial Boiler Troubleshooting | 2017-12-13 | Paper from the AFRC 2017 conference titled Industrial Boiler Troubleshooting |
600 |
|
Eichamer, P. | Industrial Boiler Troubleshooting Discussion | 2017-12-13 | Paper from the AFRC 2017 conference titled Industrial Boiler Troubleshooting Discussion |