TO
| Author | Title | Subject | Date | Publication Type | ||
|---|---|---|---|---|---|---|
| 101 |
 |
Xu, Yang | Algorithms for automatic generation of relative timing constraints | Asynchronous circuits; formal verification; relative timing | 2011-05 | dissertation |
| 102 |
 |
Haslam, Michael Dean | Aligning carbon nanotubes using ultrasound to reinforce composite materials | acoustic; alignment; CNT; composties; nanotubes; ultrasound | 2012-12 | thesis |
| 103 |
 |
Ramasamy, Uma | Alkali-silica reaction resistant concrete using pumice blended cement | Civil engineering; materials science | 2014 | dissertation |
| 104 |
 |
Orr, Joseph Allen | An Anesthesia alarm system based on neural networks. | Neural Networks (Computer); Respiration, Artificial; Signal Processing, Computer-Assisted | 1991-06 | dissertation |
| 105 |
 |
Ayer, David; Fuller, Mark | An application of axisymmetrical laminar flow to fountain design | Fountains; Hydraulic engineering | 1976 | thesis |
| 106 |
 |
Johnson, Michael Aaron | An automated microfluidic nucleic acid extraction system for sample preparation with an integrated polymerase chain reaction module | Microfluidics; nucleic acid | 2018 | dissertation |
| 107 |
 |
Anjewierden, Douglas | An electrostatic microvalve for pneumatic control of microfluidic systems | Electrostatic; MEMS; microfluidics; microvalves; pneumatic control | 2011-05 | thesis |
| 108 |
 |
Damani, Aayush | An empirical model of piezoelectric stick-slip actuation of the Kleindiek MM3A micromanipulator | Loop; micromanipulator; model; open; piezoelectric; stick-slip | 2013-05 | thesis |
| 109 |
 |
Lasher, Richard Allen | An engineering approach to direct and characterize the structure of cardiac tissue | Bioreactor; cardiac tissue structure; confocal microscopy; tissue engineering; heart; histology | 2012 | dissertation |
| 110 |
 |
Brownell, Alexander Arthur | An engineering approach to improve clinical usability of quantitative electromyography | Electromyography; electrophysiology; modeling; neuromuscular disease; quantitative EMG | 2011-05 | dissertation |
| 111 |
 |
Punati, Naveen Kumar | An Eulerian one-dimensional turbulence model: application to turbulent and multiphase reacting flows | Extinction and reignition; nonprefixed jet flame; one-dimensional turbulence model; parameter sensitivity; particle laden jets; premixed jet flame | 2012-08 | dissertation |
| 112 |
 |
Jauchler, Jason Andrew | An examination into the effects of corrosion blends on sturdy, integrally stiffened aircraft compression panels | Corrosion blend; Integrally stiffened panel; Nonlinear buckling and post-buckling analysis; Upper wing skin | 2017 | thesis |
| 113 |
 |
Morris, William James | An examination of pulverized coal combustion aerosols in air and in retrofit oxy-fired combustion environments | Aerosol; Ash chemistry; carbon capture; coal; oxy-combustion; soot | 2011-12 | dissertation |
| 114 |
 |
Kolhe, Sanket Anil | An experimental investigation of thermoacoustic lasers operating in audible frequency range | Pure sciences; applied sciences | 2012-12 | thesis |
| 115 |
 |
Price, Timothy A. | An experimental study of momentum and scalar transport in heterogeneous vegetative canopies | Canopy; particle deposition; turbulence | 2018 | dissertation |
| 116 |
 |
Lee, Sangju | An experimental study of wire electrical discharge machining for high resistivity semiconductors through local and temporal enhancement of electrical conductivity | High resistivity semiconductors; powder mixed; slicing rate; wire electrical discharge machining | 2018 | dissertation |
| 117 |
 |
Nunna, Himabindu | An experimental study on the tribological effects of targetted cutting fluid combinations on surface integrity of machined AISI 1045 steel | Tribological effects; cutting fluid; AISI 1045 steel | 2012-08 | thesis |
| 118 |
 |
Driggs, Jonathan Davis | An improved channel estimation algorithm for filter bank multicarrier spread spectrum | Channel estimation; filter bank multicarrier; maximum likelihood estimation; signal processing | 2017 | thesis |
| 119 |
 |
Reid, Charles Martin | An instrumentalist approach to validation: a quantitative assessment of a novel coal gasification model | Coal; DQMOM; instrumentalism; LES; simulation; validation | 2012 | dissertation |
| 120 |
 |
Venkat, Anand | An integrated compiler and runtime framework for sparse matrix codes | Compilers; computer architecture; sparse matrix codes | 2016 | dissertation |
| 121 |
 |
Papulak, Tyler Steven | An inverse acoustical phased array technique for impact detection and location | Composites; impact detection and location; large structures; modal acoustic emissions; phased array; structural health monitoring | 2012-05 | thesis |
| 122 |
 |
Baker, Brian William | An Investigation of Micromachined tungsten filaments as incandescent microlamps | Incandescent lamps; filaments; tungsten lamps | 2000 | thesis |
| 123 |
 |
Metcalf, Gary Steven | An investigation of oxygen-containing compounds - phenols and indanols - in coal liquid distillates | Coal liquefaction; Oxo compounds | 1982-12 | thesis |
| 124 |
 |
Fuller, Timothy J | An investigation of the effects of deformation-induced anisotropy on isotropic classical elastic-plastic materials | Classical plasticity; Elastic potential; Induced anisotropy; Thermomechanics | 2010-08 | dissertation |
| 125 |
 |
Wu, Shang Chieh | An iterative inversion method for transmission line fault location | Inversion; iterative; reflectometry; TDR; transmission line; wire fault location | 2011-08 | dissertation |