TO
| Author | Title | Subject | Date | Publication Type | ||
|---|---|---|---|---|---|---|
| 1 |
 |
Pedersen, Justin Michael | A biomechanical analysis of seating stresses based upon wheelchair propulsion | Pressure; Pressure Ulcer Prevention; Shear Stress; Wheelchair Propulsion | 2013-05 | thesis |
| 2 |
 |
Nolin, James | A control system for an active wearable lift assist device | Lifting and carrying -- equipment and supplies; lifting and carrying; lift assist device; control system | 2012-05 | thesis |
| 3 |
 |
Rangasamy, Nithin Srinivas | A fundamental multiscale study on mechanical, microstructural, and topographical characteristics of machining-induced surface integrity in Ti-6Al-4V titanium alloy | Mechanical engineering; materials science | 2017 | thesis |
| 4 |
 |
Freckleton, K. Beauwen | A preliminary analysis of the ability of a potential orthotic device to reduce and mitigate shoe slip | Engineering; Robotics | 2017 | thesis |
| 5 |
 |
Burroughs, Michelle L. | A sarrus-based passive mechanism for rotorcraft perching | Mechanism; Perching; Robotics; Rotorcraft; Sarrus | 2014-12 | thesis |
| 6 |
 |
Wright, Samuel E. | A singularity-free mechanism for holonomic orientation control of a spherical permanent magnet | Applied sciences | 2014 | thesis |
| 7 |
 |
Hyer, Tony Clayton | A study comparing changes in loading conditions of an extended service life aircraft using 17-7PH stainless steel | 17-7PH; Spectrum; Stainless | 2014-08 | thesis |
| 8 |
 |
Beal, Roger Zack | A study comparing changes in loading conditions of an extended service life system using aluminum 2024-T351 | 2014-08 | thesis | |
| 9 |
 |
Surathu, Rohit | A study of coupling two thermoacoustic lasers | 2013-05 | thesis | |
| 10 |
 |
Nguyen, Lam Trung | A study of enhanced energy capture by a vertical axis wind turbine in an urban/suburban environment | Renewable Energy; Urban/Suburban Area; Urban/Suburban Energy; Vertical Axis Wind Turbine; Wind Energy | 2017 | dissertation |
| 11 |
 |
Craig, Seth Lorenzo | A study of fracturing and heat transfer in enhanced geothermal systems | EGS; Experimentation; Heat Transfer; Hydraulic Fracturing; Raft River; Thermal Fracturing | 2016 | dissertation |
| 12 |
 |
Cavilla, Matthew Stephen | A superelastic helicotome for capsulorhexis | Capsulorhexis; cataract; design; medical device; nitinol; ophthalmology | 2016 | thesis |
| 13 |
 |
Stewart, Charles Andrew | A vertical active handrest to aid in dexterous tasks and to provide gravitational support | Active handrest; Admittance control; Ergonomics; Gravitational support; Robotics | 2012-05 | thesis |
| 14 |
 |
Barnes, Owen R. | A wearable underactuated kinesthetic device for inducing arm swing during gait rehabilitation | 2015-05 | thesis | |
| 15 |
 |
Uprety, Bibhisha | Acoustic emission-based sensor analysis and damage classification for structural health monitoring of composite structures | Composites; Damage characterization; Low-velocity Impacts; Sensors; Signal processing; Structural health monitoring | 2015-05 | thesis |
| 16 |
 |
Christensen, David Brent | Acoustic Power Transfer Systems for Implantable Medical Devices: Modeling Technique and Analysis | Acoustics; Mechanical engineering; Electrical engineering | 2017 | dissertation |
| 17 |
 |
Steigerwaldt, Brett Alan | Active shoe sole capable of providing a level walking surface on low-angled terrain | Active shoe sole; Ankle deflection; Ankle mobility; Ankle moment; Tarsal coalition | 2011-08 | thesis |
| 18 |
 |
Shelby, Brian Douglas | Active testing apparatus for force and displacement of the fingers | Fingers - Mechanical properties; Electromyography; Prosthesis - Control systems | 2013-05 | thesis |
| 19 |
 |
Hejrati, Babak | Advances in robot-assisted gait rehabilitation with self-selected speed | Gait; Rehabilitation; Robotics; Self-selected speed | 2016 | dissertation |
| 20 |
 |
Mason, Matthew Scott | Aerothermoelastic modeling and simulation of aerospace vehicles using particle-based methods | Computational Fluid Dynamics; Hypersonic; Material Point Method; Particle-Based Methods | 2015 | dissertation |
| 21 |
 |
Jamison, Ryan Dale | Aerothermoelastic modeling of hypersonic vehicles | Hypers; Fluid-structure interaction | 2008-12 | thesis |
| 22 |
 |
Nye, Kevin Scott | Age-related changes in the mechanical properties of arteries | Cerebral Artery; Development; Head Injury; Vessel Mechanics | 2015 | thesis |
| 23 |
 |
Haslam, Michael Dean | Aligning carbon nanotubes using ultrasound to reinforce composite materials | acoustic, alignment, CNT, composties, nanotubes, ultrasound | 2012-12 | thesis |
| 24 |
 |
Anjewierden, Douglas | An electrostatic microvalve for pneumatic control of microfluidic systems | Electrostatic; MEMS; Microfluidics; Microvalves; Pneumatic control | 2011-05 | thesis |
| 25 |
 |
Damani, Aayush | An empirical model of piezoelectric stick-slip actuation of the Kleindiek MM3A micromanipulator | Loop; Micromanipulator; Model; Open; Piezoelectric; Stick-slip | 2013-05 | thesis |