TO
| Author | Title | Subject | Date | Publication Type | ||
|---|---|---|---|---|---|---|
| 1 |
 |
Ford, Kurtis Ross | Compliant microjoint replacements | Micro compliant bistable mechanism; Micro-compliant linkage; Mircohinge; Out-of-plane spiral actuator; Remote actuation; Scanning electron microscope; Compliant microjoints | 2011-05 | thesis |
| 2 |
 |
DiNapoli, Ryan M. | Development and validation of an instrumented test fixture for vehicle seats in low-speed rear-end collisions | 2020 | thesis | |
| 3 |
 |
Sok, Thien | Effects of angled stitch reinforcement on foam core sandwich structures | Aerospace engineering; Mechanical engineering; Materials science | 2010-12 | thesis |
| 4 |
 |
Holtey, Clinton F | Printed circuit board integrated electrostatically actuated micro pneumatic valve | Microfluidics; Fluid control devices | 2009-11-19 | thesis |
| 5 |
 |
Samadi, Mohammad Reza Yazdi | Stability analysis of a three-dimensional quadruped trotting robot with passive compliant legs | Robots - Dynamics; Mobile robots; Locomotion | 2012-12 | thesis |
| 6 |
 |
Freckleton, K. Beauwen | A preliminary analysis of the ability of a potential orthotic device to reduce and mitigate shoe slip | Engineering; Robotics | 2017 | thesis |
| 7 |
 |
Fehlberg, Mark Allen | Improving large workspace precision manipulation through use of an active handrest | Adaptive control; Admittance control; Assistive devices; Haptic interfaces; Human performance augmentation; Human robot interaction | 2014-05 | dissertation |
| 8 |
 |
Fernandes, Clinton | Variable compliant under-actuated leg for quadruped robots | Robotics | 2018 | thesis |
| 9 |
 |
Sani, Hamidreza Najafi | Design, control, and evaluation of a spatial active handrest for providing ergonomic support and gravity compensation over a large workspace | Hardrest; Rehabilitation; Robotics | 2015-05 | dissertation |
| 10 |
 |
Densley, Bryon R. | Development and testing of a paragliding system for people with lower extremity disabilities | Exiremity; Disabilities; Paragliding; Phoenix | 2012-12 | thesis |
| 11 |
 |
Anderson, Biard E.; Mellor, Myron W.; Woodhead, Robert C. | Low temperature carbonization of coal: a solution to the smoke nuisance problem and a method of more fully utilizing the coal resources of the Rocky Mountain Region | Smoke prevention; Coal; Carbonization | 1935-05 | thesis |
| 12 |
 |
Jensen, Derek D. | An observational investigation of transitory turbulence in the atmospheric boundary layer | Atmospheric Modeling; Evening Transition; Katabatic Flow; Micrometeorology; Similarity Theory; Surface Layer | 2016 | dissertation |
| 13 |
 |
Hang, Chaoxun | Observational studies of soil moisture, Valley Fog and temperature variance in the atmospheric boundary layer over diverse terrain | Fluid mechanics; Atmospheric sciences; Environmental engineering | 2017 | dissertation |
| 14 |
 |
Van Otten, James Terry | Failure progressions in sandwich composites for crashworthiness applications | Analytical model; Composite; Crashworthiness; Energy absorption; Failure progressions; Sandwich composite | 2011-05 | thesis |
| 15 |
 |
Holmes, Heather A | Investigation of chemical properties and transport phenomena associated with pollutants in the atmospheric boundary layer | Air pollution; Atmospheric boundary layer; Atmospheric mercury; Deposition; Dispersion; Particulate matter; Transport phenomena | 2010-12 | dissertation |
| 16 |
 |
Allen, Chad | Development of a fast response building resolving urban energy model | CFD; Convection; GPU; Heat transfer; Radiation; Urban; QUIC; Urban wind; Particle dispersion | 2010-08 | thesis |
| 17 |
 |
Nambi, Manikantan | Intuitive telemanipulation of micromanipulators with piezoelectric stick-slip actuators with application in retinal surgery | Haptics; Retinal surgery; Robot-assisted surgery; Stick-Slip Actuators; Teleoperation | 2015 | dissertation |
| 18 |
 |
Montemayor, Harvest Media luna | Subterranean thermal energy storage using thermosiphon arrays | alternative heating and cooling; smart thermosiphon; thermosiphon; thermosiphon array | 2015-08 | thesis |
| 19 |
 |
Christensen, Roland J. | Determination of mechanical properties of rocks at high pressure and strain rate with a split Hopkinson bar | Ute children, intelligence testing; Children, intelligence testing | 1971 | thesis |
| 20 |
 |
Albonaeem, Mohammed | Improving the efficiency and performance of a thermoacoustic laser powered by pulsed thermal radiation | Microphone Calibration; noise; Solar; TA converter; Thermoacoustic | 2015 | thesis |
| 21 |
 |
Doxon, Andrew John | Improving combined tactile-kinesthetic haptic feedback through haptic shading algorithms and mechanical design constraints | Device design; Haptics; Psycophysical | 2014-05 | dissertation |
| 22 |
 |
Samuel, Raheel | Microfluidic research tools for neuroscience | c. elegans; genotyping; microfluidics; microvalves; PDMS; zebrafish | 2014 | dissertation |
| 23 |
 |
Vogt, Andrew Peter | Human stability and the likelihood of falling: a comparison of walking and skiing locomotion | Bioinstrumentation; Bipedal stability; Likelihood of falling; Potential to fall; Skiing locomotion; Walking locomotion | 2013-12 | dissertation |
| 24 |
 |
Surapaneni, Rajesh | Microfluidic DNA extraction and quantification using a nanoporous membrane and flow rate analysis | gDNA | 2009-10-30 | thesis |
| 25 |
 |
Welborn, Austin Ray | Simulation of diffusion in three unique situations for the novel capsule drug ring | Capsule drug ring; Bevacizumab; Avastin; Retinal degeneration; Macular degeneration; Drug release; Drug delivery systems | 2010-08 | thesis |