Author | Title | Subject | Date | Publication Type | ||
---|---|---|---|---|---|---|
301 | Naylor, Jeffrey Tylyn | Quantitative analysis of trajectory tracking characteristics for a functional human wrist under resistive loads | Engineering Control Metrics; Human Joint Control; Trajectory Tracking; Wrist Control | 2015-05 | thesis | |
302 | Phipps, Cristian C | Quasi-static rolling control for hybrid rolling-walking and climbing robots | Robot motion | 2007-11-26 | thesis | |
303 | Schmidt, Matthew Grant | Real-time feedback methods for gait rehabilitation through a mobile platform | Android; Feedback; Gait; Insole; Mobile; Real-time | 2013-05 | thesis | |
304 | Audd, M. Clay | Reexamination of the edge crack torsion test for measuring mode III delamination toughness in tape-laminated composites | 2019 | thesis | ||
305 | Lin, Keng-Min | Refilling mechanism to stabilize a free-floating intraocular capsule drug ring | AMD; CDR; Implant; Intraocular drug delivery; Macular degeneration; Refill | 2011-05 | thesis | |
306 | Skinner, Tyson E | Representative job 'building for video analysis completed using the Utah ergonomic analyzer | Human engineering; Health risk assessment | 2008-12 | thesis | |
307 | Paranjpe, Avadhoot | Residual stresses in machined titanium (Ti-6Al-4V) alloys | Titanium alloys | 2014-05 | thesis | |
308 | Chesebrough, Samuel William | Robot-assisted gait rehabilitation using virtual reality with torso force feedback | 2018 | dissertation | ||
309 | Jensen-Segal, Samuel I | ROCR is an oscillating climbing robot: dynamically climbing sheer walls with a pendular two-link mass-shifting robot | Bio-inspired; Brachiation; Climbing robots; Dynamic climbing; Energy efficiency; Mechatronics | 2010-12 | thesis | |
310 | Plewe, Kaden Ezra | The role of buildings in a changing environmental ERA: a modeling approach to quantifying and reducing missions | 2019 | thesis | ||
311 | Oldroyd, Holly Jayne | Scalar flux measurements in turbulent pipe flow employing combined particle image velocimetry and planar laser induced fluorescence | PIV PLIF; Scalar flux measurements; Scalar transport; Turbulent mixing; Turbulent pipe flow | 2010-08 | thesis | |
312 | Jankovich, Philip Martin | Seasonal underground thermal energy storage using smart thermosiphon arrays | Air-conditioning; Heat transfer; Phase change; Thermal energy storage; Thermosiphon arrays | 2012-08 | dissertation | |
313 | Sarrazin, John Cody | Sequential growth, regrowth, and control of polypyrrole-metal coil composite artificial muscles | actuator; artificial muscle; biomimetics; polymer; polymeric actuators | 2015-05 | dissertation | |
314 | Bowles, Todd Gilbert | Simulating irradiance variability in an urban environment using geographic information systems and quantifying impacts on the energty and economic performance for rooftop photovoltaics | 2017 | thesis | ||
315 | Andrews, Nathan F. | Simulating the diurnal cycle of the atmospheric boundary layer using large-eddy simulation with vertical adaptive mesh refinement | Adaptive mesh refinement; Atmospheric boundary layer; Large-eddy simulation | 2012-08 | thesis | |
316 | Welborn, Austin Ray | Simulation of diffusion in three unique situations for the novel capsule drug ring | Capsule drug ring; Bevacizumab; Avastin; Retinal degeneration; Macular degeneration; Drug release; Drug delivery systems | 2010-08 | thesis | |
317 | Vemparala, Sarvari | Slip, trip, and fall injuries among tractor operators | Fall; Injuries; Slip; Tractor operators; Trip; Farm tractors; Agricultural accidents | 2011-05 | thesis | |
318 | Sandstrom, Michael John | The solid particle erosion of tungsten carbide in silicon carbide slurry | Tungsten carbide -- Erosion; Slurry | 2003-12 | thesis | |
319 | Samadi, Mohammad Reza Yazdi | Stability analysis of a three-dimensional quadruped trotting robot with passive compliant legs | Robots - Dynamics; Mobile robots; Locomotion | 2012-12 | thesis | |
320 | Elliott, Robin James | Stability and metabolic analysis of walking on cross-slopes with various vertically placed backpack loads and without loads | backpack; cross-slope; Stability; Mechanical engineering; Biomechanics | 2016 | dissertation | |
321 | Arriscorreta, Carlos A. | Statistical modeling for the corrosion fatigue of aluminum alloys 7075-T6 and 2024-T3 | Aluminum alloys; Corrosion; Fatigue; Intergranular corrosion; Pitting corrosion; 7075-T6; 2024-T3 | 2012-05 | dissertation | |
322 | Shorti, Rami M. | Step negotiation biomechanics during truck cab egress and the effects of anthropometrics and cab design on driver fall biomechanics etiology. | Cross-sectional Study; Effects of Anthropometrics; Experimental Study; Falls Biomechanics; Step Negotiation Biomechanics; Truck Cab Egress | 2016 | dissertation | |
323 | Seo, Hyoungseock | Stiffness and strength of sandwich beams using glass fiber faces and polyurethane cores | Sandwich construction--Testing | 2004-05 | thesis | |
324 | Narra, Gopal | Stress bridging in particulate composites and calculation of G23 in particulate composites | Particulate composites; Stress bridging; High energy materials | 2012-05 | thesis | |
325 | Melville, Joseph | Structural damage detection using dictionary learning | Electrical engineering; Mechanical engineering; Computer science | 2017 | thesis |