|
|
Creator | Title | Date | Description |
26 |
|
Butler, G. W.; Lee, Jaesoo ; Ushimaru, Kenji ; Bernstein, Samual ; Gosman, A. David | A Numerical Simulation Methodology and its Application in Natural Gas Burner Design | 1986 | |
27 |
|
Daly, Bart J.; Stark, Walter A. Jr. | A Numerical Study of Entrained Coal Gasification with The Conchas Spray Code | 1985 | |
28 |
|
Gera, D.; Mathur, Mahendra P.; Freeman, Mark C.; Robinson, Allen L. | A Numerical Study of the Effects of Biomass Coal Cofiring on Unburned Carbon and NOx Emissions | 1999 | |
29 |
|
Marlow, D.; Norton, Thomas S. | A Reduced Mechanism for Low-Heating-Value Gas Combustion in a Perfectly Stirred Reactor | 1995 | |
30 |
|
Ouyang, Z. | A Study of Flameless Combustion Behavior of Pulverized Coal Preheated by Circulating Fluidized Bed | 2015-09-11 | Paper from the AFRC 2015 conference titled A Study of Flameless Combustion Behavior of Pulverized Coal Preheated by Circulating Fluidized Bed. |
31 |
|
Bunt, Randolph Cedric | A Study of the Performance of a Compression-Ignition Engine with Modifications to Enhance Atomization Using Alternative Fuels | 1983 | |
32 |
|
Yahagi, Masahiro; Hase, Koji | A Study on Flame Stabilization of a Perforated Porous Plate Burner | 1994 | |
33 |
|
Fangmeier, Bruce A.; Himes, Richard M.; McDannel, Mark D.; Lott, Robert A.; Toole-O'Neil, Barbara | A Summary of Air Toxic Emissions from Natural Gas-Fired Combustion Turbines | 1994 | |
34 |
|
Smith, Philip J. | A technology for measuring combustion efficiency of industrial & field flares (integrating measurements and simulations) | 2011-08-12 | Flare research over the past decade has increasingly illustrated that there is likely no one simple operational parameter (or even a few parameters) that will characterize the combustion behavior of flare flames.i Simple correlations are unobtainable because of the complexity of the nonlinear mixing... |
35 |
|
Taylor, Philip H.; Dellinger, Barry | A Thermal Stability Based Ranking of Hazardous Organic Compound Incinerability | 1987 | |
36 |
|
Jatale, Anchal; Smith, Philip; Thornock, Jeremy; Smith, Sean | A Validation of Flare Combustion Efficiency Simulations | 2012-09-05 | |
37 |
|
Diaz-Ibarra, O. | A Validation Uncertainty Quantification Analysis of a 1.5 MW Oxy-Coal Fired Furnace | 2015-09-11 | Paper from the AFRC 2015 conference titled A Validation Uncertainty Quantification Analysis of a 1.5 MW Oxy-Coal Fired Furnace |
38 |
|
Oscar H. Diaz-Ibarra | A Validation/Uncertainty Quantification (V/UQ) Analysis for a 1.5 MW Oxy-coal Fired L1500 Furnace using a Swirling Boundary Condition | 2016-09-12 | Conference Paper |
39 |
|
Diaz-Ibarra, O.H. | A Validation/uncertainty Quantification Analysis for a 1.5 MW Oxy-coal Fired L1500 Furnace using a Swirling Boundary Condition | 2016-09-12 | Paper from the AFRC 2016 conference titled A Validation/uncertainty Quantification Analysis for a 1.5 MW Oxy-coal Fired L1500 Furnace using a Swirling Boundary Condition |
40 |
|
Carroll, C. | A Wholistic Approach to Enable the Next Era of NOx Reducing Technology in Process Burners | 2018-09-17 | Paper from the AFRC 2018 conference titled A Wholistic Approach to Enable the Next Era of NOx Reducing Technology in Process Burners |
41 |
|
Shaw, Henry; Yang, Chen-Lu | Absorption of NOx Induced by Sodium Chlorite Oxidation | 1991 | |
42 |
|
| Acceptable operating parameters for steam assisted flares at Purge Rates | | Flare vendors recommend that cooling steam should always be supplied to the steam injection equipment on steam assisted flare tips. However, the nomenclature of "cooling steam" properly describes only one aspect of this steam flow. Not only does this steam provide thermal protection to the steam inj... |
43 |
|
Kodesh, Zachary; Fox, Scott; Franklin, James | Accurate and reliable flare testing methods | 2011-08-30 | Recently the Texas Commission on Environmental Quality (TCEQ), through The University of Texas (UT) initiated a project utilizing John Zink facilities to better understand the operating envelope of varying flare technologies across various process conditions. A large scale flare testing environment ... |
44 |
|
Smith, J. | Achieving Environmental Compliance through Proper Destruction Efficiency of Low-Profile Flare Systems | 2014-09-08 | Paper from the AFRC 2014 conference titled Achieving Environmental Compliance through Proper Destruction Efficiency of Low-Profile Flare Systems by J.D. Smith. |
45 |
|
Gull, W. | Achieving Heater Resiliency: The Role of Radiant Tube Support and Stack Damper Performance | 2017-12-11 | Paper from the AFRC 2017 conference titled Achieving Heater Resiliency: The Role of Radiant Tube Support and Stack Damper Performance |
46 |
|
Isaacs, Rex K. | Achieving Ultra-Low NOx Emissions in Methanol Downfired Reformer Applications | 2013-09-24 | Paper from the AFRC 2013 conference titled Achieving Ultra-Low NOx Emissions in Methanol Downfired Reformer Applications by Rex Isaacs |
47 |
|
Brown, Lynn D. | Achieving Ultra-Low Sulfur Levels in Refinery Fuel Gas | 1991 | |
48 |
|
Spellicy, Robert L. | Active and passive FTIR monitoring of flare combustion efficiency | | |
49 |
|
Industrial Monitor & Control Corporation | Active and passive monitoring of flare combustion efficiency | 2011-09-19 | |
50 |
|
Mangal, R.; Mozes, M.; Gaikwad, R.; Thampi, R.; MacDonald, D. | Additive Injection for NOx Control | 1989 | |