TO
Filters: Department: "Metallurgical Engineering" Publication Type: "dissertation" School Or College: "College of Mines & Earth Sciences" Collection: "ir_etd"
| Author | Title | Subject | Date | Publication Type | ||
|---|---|---|---|---|---|---|
| 26 |
 |
Zhu, Yakun | Integrated modeling of mixed surfactants distribution and corrosion inhibition performance in oil pipelines | Petroleum pipelines - Corrosion - Prevention | 2015 | dissertation |
| 27 |
 |
Basavarajappa, Manjunath | Investigation and analysis of flows in flotation cells using experimentation, computational fluid dynamics simulations, and mathematical models | Bubble Size Distribution; CFD; Flotation; Multiphase Flows; Population Balance Modeling; Turbulence | 2017 | dissertation |
| 28 |
 |
Tserendavga, Tsend-ayush | Isolation and characterization of lost copper and molybdenum particles in the flotation tailings of kennecott copper porphyry ores | flotation; grinding; mineral characterization; radiography | 2015-05 | dissertation |
| 29 |
 |
Medina, Juan Francisco | Liberation-limited grade/recovery curves for auriferous pyrite ores as determined by high resolution x-ray microtomography | Grade/recovery; Liberation; Microtomography; Auriferous pyrite ores | 2012-08 | dissertation |
| 30 |
 |
Lefler, Hyrum David | Low-cost production of titanium metal powder by the Hamr Process | 2018 | dissertation | |
| 31 |
 |
Luo, Xiangyi | Material design and fundamental mechanism study for the rechargeable aprotic lithium-oxygen battery | electrocatalyst; electrochemistry; Li-O2 battery | 2015 | dissertation |
| 32 |
 |
Sarkar, Sayan | Materials synthesis, characterization and first principles guided optimization for improved performance of dirac materials | 2019 | dissertation | |
| 33 |
 |
Bagri, Prashant | Measurement of thermodynamic properties of rare earth chlorides in molten LiCl-KCl eutectic Salt for waste minimization from pyrochemical processing of spent nuclear fuel | Chemistry; Nuclear engineering; Materials science | 2017 | dissertation |
| 34 |
 |
Yi, Gaosong | Measuring and modeling the long-term sensitization behavior of al 5xxx alloys | Al 5xxx alloys; ASTM G67 Mass loss test; Characterization; Long-term aging; Precipitation modeling; Sensitization | 2017 | dissertation |
| 35 |
 |
Dunstan, Matthew Kirk | Microstructure - mechanical property relationships in HSPT Ti-6Al-4V | Materials science | 2018 | dissertation |
| 36 |
 |
Werner, Joshua Michael | Modeling and validation for optimization of electrowinning performance | CFD; Depostion; Electrochemistry; Electrowinning; Modeling; Multiphase | 2017 | dissertation |
| 37 |
 |
Alkac, Dilek | Modeling flow in pulp lifter channels of grinding mills with computational fluid dynamics | Computational fluid dynamics; Discharge flow; Free surface flow; Grinding mills; Pulp lifter channels | 2011-11 | dissertation |
| 38 |
 |
Sabetian, Pouya | Modular cable-driven robot development and its applications in locomotion and rehabilitation | 2019 | dissertation | |
| 39 |
 |
Vadlamani, Bhaskar Sravan | Neutron diffraction study of phase transitions in microporous-columnar Si electrodes for Li-Ion batteries using In-Situ electrochemical cell | 2017 | dissertation | |
| 40 |
 |
Bronson, Tyler Mark | Oxidation and condensation of zinc fume in steelmaking off-gas systems | EAF Dust; Homogeneous Formation; In-Process Separation; Kinetics; Steelmaking; Zinc Oxide | 2015-08 | dissertation |
| 41 |
 |
Mohassab Ahmed, Mohassab Yousef | Phase equilibria between iron and slag in CO/CO2/H2/H2O atmospheres relevant to a novel flash ironmaking technology | FTIR; Raman; XPS; Novel flash ironmaking; Phase equilibrium,;Slag chemistry; Sohn green ironmaking technology; Steelmaking | 2013-08 | dissertation |
| 42 |
 |
Hsieh, Kuo-Tai | Phenomenological model of the hydrocyclone | Separators (Machines); Mathematical models Fluid dynamics | 1988 | dissertation |
| 43 |
 |
Zhu, Liangzhu | Preparation of high-aspect-ratio particles through the high temperature growth of 2M-wollastonite crystals | Cellular and dendritic growth; Crystal growth; Heat transfer; High temperature; Materials synthesis; Wollastonite | 2013-12 | dissertation |
| 44 |
 |
Kumar, Pankaj | Processing and mechanical behavior of powder metallurgy (pm) ti-6al-4v alloy made from tih2 | Fatigue and Fracture; Hydrogen Sintering; Mechanical Behavior; Powder Metallurgy; Tensile Properties; Titanium alloys | 2016 | dissertation |
| 45 |
 |
Wang, Haitao | Reduction kinetics of iron ore concentrate particles relevant to a novel green ironmaking process | Reduction; Iron ore; Ironmaking; Green ironmaking process; Magnetite concentrates; Suspension reduction; Gaseous reductants | 2011-08 | dissertation |
| 46 |
 |
Paramore, James D. | Relationship between processing, structure, and properties of titanium alloys produced by hydrogen sintering and phase transformation (hspt) | grain refinement; mechanical properties; microstructure; phase transformation; sintering; titanium alloys | 2015 | dissertation |
| 47 |
 |
Smith, York Reed | Self-ordering titania nanotube arrays: electrochemical anodization, functionalization, and application | 2014-08 | dissertation | |
| 48 |
 |
Kumar, Vineet | Simulations and modeling of unequal sized particles sintering | Geometric modeling; Numerical simulation; Phase field simulation; Sintering; Unequal sized particles | 2011-05 | dissertation |
| 49 |
 |
Wang, Hongtao | Sintering and grain growth of nanosized powder | Nanosized powder; Sintering; Grain growth; Tungsten | 2010-08 | dissertation |
| 50 |
 |
Truong, Vu Nguyen Thuy | Stability and molecular features of aqueous films | Chemical engineering; Thin films; Molecular chemistry | 2018 | dissertation |