TO
| Author | Title | Subject | Date | Publication Type | ||
|---|---|---|---|---|---|---|
| 376 |
 |
Griffin, Patrick Webster | Design of buck switching regulators with integrated filter for low-power integrated circuits | Buck switching regulators; Converter; Integrated; Low-power; Monolithic; Switching power supplies | 2011-05 | thesis |
| 377 |
 |
Griffiths, William Heggie | Design of canal system including canals, gates, and drops | Irrigation; Canals | 1910-05 | thesis |
| 378 |
 |
Mohamed Amr Refay Abdelghany | Design of flash ironmaking reactors with computational fluid dynamics modeling | 2018 | dissertation | |
| 379 |
 |
Rodriguez, Miguel | Design of lossy antennas - optical crescent nanoantennas and radio frequency implantable antennas | Antennas; crescents; implatable antennas; nanocrescents; Plamonics | 2015 | dissertation |
| 380 |
 |
Ghatikar, Venugopal Raghavendra | Design of minimum quantity cutting fluid dispensing system for sustainable machining | Mechanical engineering | 2010 | thesis |
| 381 |
 |
Corbin, Brendan Joseph | Design of optical scanning system to detect volume and interferences in blood specimen in test tubes | Optical scanners; Blood analysis | 2007-06-04 | thesis |
| 382 |
 |
Larsen, William A. | Design of plant for low temperature carbonization of Utah Coal by Karrick Process | Coal-fired power plants, Utah | 1932 | thesis |
| 383 |
 |
Desai, Aditya S | Design of vents for the incorporation of wind effects to a virtual environment | Wind tunnels; Virtual reality | 2009-10-22 | thesis |
| 384 |
 |
Colter, Jourdan M. | Design optimization of a hyaluronic-acid based hydrogel drug-delivery device for immobilization in the eye | CMHA-S; Finite element analysis; Friction; Ocular drug delivery; Ophthalmology; Biomedical engineering; Mechanical engineering; Biomechanics | 2016 | thesis |
| 385 |
 |
Nadig, Ranga | Design studies for direct contact condensers with and without the presence of noncondensible gas | 1984-12 | dissertation | |
| 386 |
 |
Paulsen, Andrew Keith | Design techniques for terahertz plasmonic filters | Filter; K-space; Plasmon; Plasmonic; Terahertz | 2012-12 | thesis |
| 387 |
 |
Paulsen, Andrew Keith | Design techniques for terahertz plasmonic filters | Wireless communication systems; Electromagnetic spectrum; Terahertz filters | 2014-12 | dissertation |
| 388 |
 |
Pourzand, Hoorad | Design, analysis and simulation of high sensitivity, n-coupled oscillator, micro gyroscope | Bulk mass resonators; coupled resonators; MEMS gyroscopes; Ring gyroscopes | 2015 | thesis |
| 389 |
 |
Basaeri, Hamid | Design, analysis, and fabrication of piezoelectric micromachined ultrasonic power transducers for biomedical implants | 2019 | dissertation | |
| 390 |
 |
Rantz, Robert | Design, analysis, and optimization of wrist-worn energy harvesters | 2019 | dissertation | |
| 391 |
 |
Caswell, Nathaniel Alexis | Design, characterization, and testing of skin-stretch feedback integrated into a game controller | Game controller; Haptics; Skin stretch; Tactile | 2013-12 | thesis |
| 392 |
 |
Sani, Hamidreza Najafi | Design, control, and evaluation of a spatial active handrest for providing ergonomic support and gravity compensation over a large workspace | Hardrest; Rehabilitation; Robotics | 2015-05 | dissertation |
| 393 |
 |
Minck, Lindsay K. | Design, deployment, and initial calibration of a tower for greenhouse gas measurements | Carbon dioxide; Footprint; Greenhouse gases; Methane; Sonic anemometer; Tower | 2015-05 | thesis |
| 394 |
 |
Redd, Christian Brandt | Design, development, and testing of an insole sensor system for real-time gait feedback and rehabilitation | Feedback; Gait; Rehabilitation; Sensor; Sensory; Wireless | 2011-08 | thesis |
| 395 |
 |
Gandhi, Minu Shikha | Design, development, and validation of vibrotactile threshold evaluator for workspace screening of carpal tunnel syndrome | Ergonomics; Psychophysical; Tactile, Vibrotactile threshold; Carpal tunnel syndrome; Workplace screening | 2011-05 | dissertation |
| 396 |
 |
Miller, Jonathan James | Design, fabrication, programming, and evaluation of an ankle foot simulator | Awesome; Control; Design; Electro-Mechanical; Gait; Robot | 2016 | thesis |
| 397 |
 |
Dockstader, Keith E. Jr. | Design, modeling, and gait control of a rolling quadruped (Roll-U-Ped) | Mechanical engineering; Robotics | 2018 | thesis |
| 398 |
 |
Degnah, Ahmed Abdulaziz | Design, synthesis, and properties of titanium metal matrix composites based on Ti-B-Fe System | 2019 | dissertation | |
| 399 |
 |
Montandon, Markus Nils | Design, testing and implementation of a smartphone peripheral for bimanual skin stretch feedback and user input | handheld devices; haptics; human computer interaction; shear display; skin stretch; touch feedback | 2013-05 | thesis |
| 400 |
 |
Long, Christina Marie | Design, validation, and implementation of a capnogram waveform simulator | Anesthesia; Anesthesiology; Capnogram; Capnometer; Simulator | 2011-12 | thesis |