|
|
Author | Title | Subject | Date | Publication Type |
76 |
|
Fallahi, Zahra | Modeling and optimization framework for reducing emissions based on location and timing of electricity use in commercial buildings | | 2019 | dissertation |
77 |
|
He, Bang | Multiscale and Multiphysics investigation of fracture in heterogeneous porous media | | 2020 | dissertation |
78 |
|
Jayamohan, Harikrishnan | Nanomaterial based detection and degradation of biological and chemical contaminants in a microfluidic system | Biosensors; Electrochemical Detection; Lab-on-a-chip; Microfluidics; Nanotechnology; Pathogen | 2015-08 | dissertation |
79 |
|
Noble, Brooklyn Ann | Nanoscale mechanics of ultrathin polymer films using molecular dynamics | | 2019 | dissertation |
80 |
|
Petersen, Spencer Justin | Near-field thermal radiative emission of materials demonstrating near infrared surface polariton resonance | Effective medium theory; Electromagnetic metamaterials; Indium tin oxide; Near-field thermal radiation; Surface polariton resonance; Thermophotovoltaics | 2016 | dissertation |
81 |
|
Burghardt, Jeffrey A. | Nonlocal plasticity, instability, and well-posedness of the elastic-plastic initial-boundary value problem | Flow rule; Instability; Material point method; Nonassociated; Nonlocal plasticity; Plasticity | 2011-12 | dissertation |
82 |
|
Zayernouri, Mohsen | Nonparametric approaches to computational sensitivity analysis of turbulent planar shear layers | | 2010 | dissertation |
83 |
|
Bernardi, Michael P. | Numerical and experimental techniques for enhanced power generation in a nanoscale-gap thermophotovoltaic device | Mechanical Engineering; Blackbody Limit; Fluctuational Electrodynamics; Nanoscale-Gap Thermophotovoitaic Device; Near-Field Radiation; Power Generation | 2016 | dissertation |
84 |
|
Speckart, Scott | Numerical modeling and field measurement of vehicle-generated road dust transport and removal near the road | Arid; Mitigation; PM10; Turbulence; Vegitation; Windbreak | 2013-12 | dissertation |
85 |
|
Edalatpour, Sheila | Numerical modeling of near-field thermal radiation in complex, three-dimensional and multiscale geometries | Thermal discrete dipole approximation (T-DDA) - Research; Radiative Heat Transfer | 2016 | dissertation |
86 |
|
Hang, Chaoxun | Observational studies of soil moisture, Valley Fog and temperature variance in the atmospheric boundary layer over diverse terrain | Fluid mechanics; Atmospheric sciences; Environmental engineering | 2017 | dissertation |
87 |
|
Shedd, Daniel Francois | Ocular Injury Following Primary Blast Exposure | Ophthalmology; Mechanical engineering; Biomechanics | 2017 | dissertation |
88 |
|
Liu, Xin | Optical systems to evaluate volume of medical samples in opaque test tubes | Laser diode; Liquid level sensors; Meniscus model; Optics; Optoelectronics; Volume measurement; Medical samples | 2011-08 | dissertation |
89 |
|
Abu-Khalaf, Jumana M. | Optimization of stretchable fingernail sensor design for fingertip force direction estimation | Fingernail sensor; Optical array; Photoplethysmography | 2012-05 | dissertation |
90 |
|
Sweeney, Daniel Joseph | Performance of a pilot-scale, steam-blown, pressurized fluidized bed biomass gasifier | Biofuel; Biomass gasification; Fluidized bed; Gasifier tars; Pressure fluctuation measurement; Renewable energy | 2012-12 | dissertation |
91 |
|
Carlson, Scott Spencer | Quantifying the effect of a fatigue crack on the residual stress field induced by the split sleeve cold expansion process in 2024-T351 and 7075-T651 aluminum alloys | Aerospace engineering; Mechanical engineering | 2018 | dissertation |
92 |
|
Price, Michael Robert | Quantifying the protective properties and adhesion to the substrate of ultra-thin multilayer diamond-like carbon coatings using molecular dynamics simulation | Mechanical engineering; Materials science | 2017 | dissertation |
93 |
|
Chesebrough, Samuel William | Robot-assisted gait rehabilitation using virtual reality with torso force feedback | | 2018 | dissertation |
94 |
|
Jankovich, Philip Martin | Seasonal underground thermal energy storage using smart thermosiphon arrays | Air-conditioning; Heat transfer; Phase change; Thermal energy storage; Thermosiphon arrays | 2012-08 | dissertation |
95 |
|
Sarrazin, John Cody | Sequential growth, regrowth, and control of polypyrrole-metal coil composite artificial muscles | actuator; artificial muscle; biomimetics; polymer; polymeric actuators | 2015-05 | dissertation |
96 |
|
Elliott, Robin James | Stability and metabolic analysis of walking on cross-slopes with various vertically placed backpack loads and without loads | backpack; cross-slope; Stability; Mechanical engineering; Biomechanics | 2016 | dissertation |
97 |
|
Arriscorreta, Carlos A. | Statistical modeling for the corrosion fatigue of aluminum alloys 7075-T6 and 2024-T3 | Aluminum alloys; Corrosion; Fatigue; Intergranular corrosion; Pitting corrosion; 7075-T6; 2024-T3 | 2012-05 | dissertation |
98 |
|
Shorti, Rami M. | Step negotiation biomechanics during truck cab egress and the effects of anthropometrics and cab design on driver fall biomechanics etiology. | Cross-sectional Study; Effects of Anthropometrics; Experimental Study; Falls Biomechanics; Step Negotiation Biomechanics; Truck Cab Egress | 2016 | dissertation |
99 |
|
Hamian, Sina | Subcontinuum thermal transport in tip-based thermal engineering | Ballistic Diffusive Thermal Transport; Full Spectrum Heated Cantilever Characterization; Nanoscale Heat Transfer; Near-Field Force Gradient; Near-Field Thermal Radiation; Scanning Thermal Microscopy (SThM) | 2017 | dissertation |
100 |
|
Hamian, Sina | Subcontinuum thermal transport in tip-based thermal engineering | Ballistic Diffusive Thermal Transport; Full Spectrum Heated Cantilever Characterization; Nanoscale Heat Transfer; Near-Field Force Gradient; Near-Field Thermal Radiation; Scanning Thermal Microscopy (SThM) | 2017 | dissertation |