Single particle model for in flight sorbent capture of mercury

Update Item Information
Title Single particle model for in flight sorbent capture of mercury
Publication Type thesis
School or College College of Engineering
Department Chemical Engineering
Author Morrill, Michael Robert
Date 2010-03-30
Description Mercury contamination in the planet's oceans and lakes presents a growing threat to human health and safety. The bioaccumulation of methyl mercury in fish and other aquatic life is rendering them increasingly unfit for human consumption. Accumulation of mercury in groundwater is also a growing hazard. Coal fired power plants are currently the largest anthropogenic source of mercury, but luckily, their contribution to global mercury levels can be abated with the installation of proper controls. Activated carbon injection (ACI) is among the most developed and promising of the available control technologies. To optimize ACI processes, models are necessary to properly gauge the effectiveness of various sorbents. This study developed an entrained flow model to build on previous work and further investigate factors that may influence mercury adsorption. For qualitative analysis, the model requires an understanding of reactor conditions, sorbent parameters, and packed-bed isotherms. Quantitative prediction of mercury adsorption is possible if enough information is provided about the sorbent and reactor. Namely, apparent density, porosity, average pore diameter, BET surface area, maximum uptake, equilibrium sorbent parameters, residence time, temperature, sorbent particle size and distribution, inlet concentration, and sorbent feed rate composition must be known. External mass transfer effects exclusively limit mercury adsorption when sorbent particle diameter is less than roughly 1 micron, and intraparticle diffusions exclusively limit mercury adsorption at diameters greater than one 100 microns. As expected, large BET surface areas and residence times favor adsorption. It is shown that the isotherm chosen in a model is not nearly as important as the adsorption parameters used in it. The Langmuir and Freunlich adsorption models are both good choices for modeling of intraparticle diffusion. Increased mercury adsorption can be shown with decreasing average particle size, increasing feed rate, and increasing average pore diameter. Full scale data are not entirely consistent with the trend of decreasing particle size and increasing adsorption; the cause is not yet understood.
Type Text
Publisher University of Utah
Subject Mercury--Decontamination; Mercury--Environmental aspects
Dissertation Institution University of Utah
Dissertation Name MS
Language eng
Relation is Version of Digital reproduction of "Single particle model for in flight sorbent capture of mercury" J. Willard Marriott Library Special Collections TP7.5 2010 .M67
Rights Management ©Michael Robert Morrill. To comply with copyright, the file for this work may be restricted to The University of Utah campus libraries pending author permission.
Format application/pdf
Format Medium application/pdf
Format Extent 130,298 bytes
Identifier us-etd2,154210
Source Original: University of Utah J. Willard Marriott Library Special Collections
Conversion Specifications Original scanned on Epson GT-30000 as 400 dpi to pdf using ABBYY FineReader 9.0 Professional Edition.
ARK ark:/87278/s6zs3b5n
Setname ir_etd
ID 193693
Reference URL https://collections.lib.utah.edu/ark:/87278/s6zs3b5n
Back to Search Results