Design and fabrication of an actuation module using integrated pneumatic technology

Update Item Information
Title Design and fabrication of an actuation module using integrated pneumatic technology
Publication Type thesis
School or College College of Engineering
Department Mechanical Engineering
Author Maxwell, John Nathan
Date 2007-11-02
Description In this thesis, xurography techniques are used to create an integrated pneumatic card (IPC) by integrating fluidic channels inside the electronic circuitry of their control system. In the simplest design of an IPC, there are three main layers: the top layer made of printed circuit board (PCB), the middle layer made of double-sided tape with air channels xurographically cut in it, and a bottom layer of PCB. Flow enters through an opening in the top layer of PCB and is routed through valves and to outlets in the bottom PCB by the air channels in the tape. The surfacemount valves are attached pneumatically and electrically to the first layer of PCB. By using PCB as the substrate, the circuitry for controlling the device can be integrated directly onto the same material as the valves. A prototype was device created for testing purposes to verify that the device could be operated within specifications. It consists of an air inlet and eight three-way valves that route air to four bladders, three pinch points and one flow-through channel. The dimensions of the entire device measure 2.4 x 3.6 x 1 in excluding the protruding wire attachment. The modeling of this device was done using a one-dimensional flow assumption and was used to predict the time constant to inflate a bladder. Key calculations of this model include: an equation to calculate bladder pressure as a function of time and flow rate, and an equation for flow rate as a function of pressure. Also, equations to predict the acceleration of air in the channel were developed. Data for channel expansion due to expansion of the acrylic adhesive are used directly in the model. These calculations were made iteratively using a spreadsheet. The results were compared to experimental results and shown to be an adequate representation of reality.
Type Text
Publisher University of Utah
Subject Pneumatic control; Actuators; Printed circuits
Dissertation Institution University of Utah
Dissertation Name MS
Language eng
Relation is Version of Digital reproduction of "Design and fabrication of an actuation module using integrated pneumatic technology" J. Willard Marriott Library Special Collections TJ7.5 2007 .M39
Rights Management © John Nathan Maxwell
Format application/pdf
Format Medium application/pdf
Format Extent 54,753 bytes
Identifier us-etd2,122096
Source Original: University of Utah J. Willard Marriott Library Special Collections
Conversion Specifications Original scanned on Epson GT-30000 as 400 dpi to pdf using ABBYY FineReader 9.0 Professional Edition.
ARK ark:/87278/s6bc4d54
Setname ir_etd
ID 193636
Reference URL https://collections.lib.utah.edu/ark:/87278/s6bc4d54
Back to Search Results