Generation of thermo-acoustic waves from pulsed solar/IR radiation

Update Item Information
Title Generation of thermo-acoustic waves from pulsed solar/IR radiation
Publication Type thesis
School or College College of Engineering
Department Mechanical Engineering
Author Rahman, Aowabin
Date 2014-05
Description Acoustic waves could potentially be used in a wide range of engineering applications; however, the high energy consumption in generating acoustic waves from electrical energy and the cost associated with the process limit the use of acoustic waves in industrial processes. Acoustic waves converted from solar radiation provide a feasible way of obtaining acoustic energy, without relying on conventional nonrenewable energy sources. One of the goals of this thesis project was to experimentally study the conversion of thermal to acoustic energy using pulsed radiation. The experiments were categorized into "indoor" and "outdoor" experiments, each with a separate experimental setup. The indoor experiments used an IR heater to power the thermo-acoustic lasers and were primarily aimed at studying the effect of various experimental parameters on the amplitude of sound waves in the low frequency range (below 130 Hz). The IR radiation was modulated externally using a chopper wheel and then impinged on a porous solid, which was housed inside a thermo-acoustic (TA) converter. A microphone located at a certain distance from the porous solid inside the TA converter detected the acoustic signals. The "outdoor" experiments, which were targeted at TA conversion at comparatively higher frequencies (in 200 Hz-3 kHz range) used solar energy to power the thermo-acoustic laser. iv The amplitudes (in RMS) of thermo-acoustic signals obtained in experiments using IR heater as radiation source were in the 80-100 dB range. The frequency of acoustic waves corresponded to the frequency of interceptions of the radiation beam by the chopper. The amplitudes of acoustic waves were influenced by several factors, including the chopping frequency, magnitude of radiation flux, type of porous material, length of porous material, external heating of the TA converter housing, location of microphone within the air column, and design of the TA converter. The time-dependent profile of the thermo-acoustic signals also showed "transient" behavior, meaning that the RMS amplitudes of TA signals varied over a time interval much greater than the time period of acoustic cycles. Acoustic amplitudes in the range of 75-95 dB were obtained using solar energy as the heat source, within the frequency range of 200 Hz-3 kHz.
Type Text
Publisher University of Utah
Subject Acoustic waves
Dissertation Institution University of Utah
Dissertation Name Master of Science
Language eng
Rights Management Copyright © Aowabin Rahman 2014
Format application/pdf
Format Medium application/pdf
Format Extent 3,389,535 Bytes
Identifier etd3/id/2957
ARK ark:/87278/s6h16966
Setname ir_etd
ID 196526
Reference URL https://collections.lib.utah.edu/ark:/87278/s6h16966
Back to Search Results