Design, analysis and simulation of high sensitivity, n-coupled oscillator, micro gyroscope

Update Item Information
Title Design, analysis and simulation of high sensitivity, n-coupled oscillator, micro gyroscope
Publication Type thesis
School or College College of Engineering
Department Electrical & Computer Engineering
Author Pourzand, Hoorad
Date 2015
Description Microelectromechanical gyroscopes are readily used in cars and cell phones. Tactical gyroscopes are available inexpensively and they offer 0.01 to 0.1 % scale factor inaccuracy. On the other hand, strategic gyroscopes with much better performance levels are 100,000 times more expensive. The main objective of this work is to explore the possibility of developing inexpensive strategic grade gyroscopes using microelectromechanical systems technology. Most of the available gyroscopes are surface micromachined due to fabrication issues and misalignment problems involved in multistep fabrication processes necessary to use the bulk of the wafer as the proofmass in MEMS gyroscopes. It can be shown that the sensitivity of the gyroscope is inversely proportional to the natural frequency; so if bulk micromachining technique is used it is possible to decrease the natural frequency further than current limits of surface micromachining in order to increase sensitivity. This thesis is focused on proposing a way to use bulk of the silicon wafer in the gyroscope to decrease the natural frequency to very low levels, such as sub-KHz regime, that cannot be achieved by single mask surface micromachining processes. It then proposes a solution for solving the misalignment problems caused by using multiple fabrication steps and masks instead of using only one mask in surface micromachined gyroscopes. In our design discrete proofmasses are linked together around a circle by compliant structures to ensure the highest effective mass and lowest effective spring constant. By using a proposed double sided fabrication technology the effect of misalignments on frequency mismatch can be reduced. ANSYS software simulations show that 20 µm misalignment between the masks causes a frequency shift equal to 0.3% of the natural frequency that can be compensated using electrostatic frequency tuning. Acceleration parasitic effects can also be a major problem in a low natural frequency gyroscope. In our design a multiple sensing electrode configuration is used that cancels the acceleration effects completely. The sensitivity of the gyroscope with 3126 Hz natural frequency is simulated to be 574 mV/(deg/sec) , or about four times higher than 132 mV/(deg/sec) , which was used as a benchmark for a sensitive gyroscope.
Type Text
Publisher University of Utah
Subject Bulk mass resonators; coupled resonators; MEMS gyroscopes; Ring gyroscopes
Dissertation Name Master of Science
Language eng
Rights Management ©Hoorad Pourzand
Format application/pdf
Format Medium application/pdf
ARK ark:/87278/s6090b8b
Setname ir_etd
ID 1355953
Reference URL https://collections.lib.utah.edu/ark:/87278/s6090b8b
Back to Search Results