| Description |
Elasticity is a design paradigm in which circuits can tolerate arbitrary latency/delay variations in their computation units as well as communication channels. Creating elastic (both synchronous and asynchronous) designs from clocked designs has potential benefits of increased modularity and robustness to variations. Several transformations have been suggested in the literature and each of these require a handshake control network (examples include synchronous elasticization and desynchronization). Elastic control network area and power overheads may become prohibitive. This dissertation investigates different optimization avenues to reduce these overheads without sacrificing the control network performance. First, an algorithm and a tool, CNG, is introduced that generates a control network with minimal total number of join and fork control steering units. Synchronous Elastic FLow (SELF) is a handshake protocol used over synchronous elastic designs. Comparing to its standard eager implementation (that uses eager forks - EForks), lazy SELF can consume less power and area. However, it typically suff ers from combinational cycles and can have inferior performance in some systems. Hence, lazy SELF has been rarely studied in the literature. This work formally and exhaustively investigates the specifi cations, diff erent implementations, and verifi cation of the lazy SELF protocol. Furthermore, several new and existing lazy designs are mapped to hybrid eager/lazy imple-mentations that retain the performance advantage of the eager design but have power and area advantages of lazy implementations, and are combinational-cycle free. This work also introduces a novel ultra simple fork (USFork) design. The USFork has two advantages over lazy forks: it is composed of simpler logic (just wires) and does not form combinational cycles. The conditions under which an EFork can be replaced by a USFork without any performance loss are formally derived. The last optimization avenue discussed in this dissertation is Elastic Bu er Controller (EBC) merging. In a typical synchronous elastic control network, some EBCs may activate their corresponding latches at similar schedules. This work provides a framework for fi nding and merging such controllers in any control network; including open networks (i.e., when the environment abstract is not available or required to be flexible) as well as networks incorporating variable latency units. Replacing EForks with USForks under some equivalence conditions as well as EBC merging have been fully automated in a tool, HGEN. The impact of this work will help achieve elasticity at a reduced cost. It will broaden the class of circuits that can be elasticized with acceptable overhead (circuits that designers would otherwise nd it too expensive to elasticize). In a MiniMIPS processor case study, comparing to a basic control network implementation, the optimization techniques of this dissertation accumulatively achieve reductions in the control network area, dynamic, and leakage power of 73.2%, 68.6%, and 69.1%, respectively. |
