226 - 250 of 1,977
Number of results to display per page
CreatorTitleDescriptionSubjectDate
226 Smith, Grant D.; Bedrov, Dmitro; Borodin, OlegStructural relaxation and dynamic hetrogeneity in a polymer melt at attractive surfacesMolecular dynamics simulations of polymer melts at flat and structured surfaces reveal that, for the former, slow dynamics and increased dynamic heterogeneity for an adsorbed polymer is due to densification of the polymer in a surface layer, while, for the latter, the energy topography of the sur...Polymer melts; Structural relaxation; Dynamic heterogeneity; Attractive surfaces; Surface energy topography; Polymer densification2003-06
227 Liu, FengHydrogen induced Si surface segregation on Ge-covered Si(001)Using Fourier transform infrared-attenuated total reflectance spectroscopy in conjunction with hydrogen adsorption to probe surface layer composition, we observe a reversible place exchange between Ge and Si on Ge-covered Si(001) when the surface is dosed with atomic H at elevated temperatures. F...Si surface segregation; Ge-covered; Si(001)1998-10
228 Furse, Cynthia M.Impedance of a short dipole antenna in a magnetized plasma via a finite difference time domain modelThe traditional analytical analysis of plasma probes requires the use of quasi-static approximations, while numerical methods require the use of an equivalent dispersive media, both producing a nontrivial analysis of the plasma environment. On the other hand, a few techniques that combine the plasm...Antenna theory; finite-difference time-domain; FDTD; Plasma covered antennas; Plasma measurements2005-08
229 Bedrov, Dmitro; Smith, Grant D.Molecular dynamics simulations of HMX crystal polymorphs using a flexible molecule force fieldMolecular dynamics simulations using a recently developed quantum chemistry-based atomistic force field [J. Phys. Chem. B 103 (1999) 3570] were performed in order to obtain unit cell parameters, coefficients of thermal expansion, and heats of sublimation for the three pure crystal polymorphs of octa...HMX; Crystal polymorphs; Force field; Coefficients of thermal expansion; Heat of sublimation; Cell parameters2002
230 Tasdizen, Tolga; Whitaker, Ross T.Higher-order nonlinear priors for surface reconstructionAbstract-For surface reconstruction problems with noisy and incomplete range data, a Bayesian estimation approach can improve the overall quality of the surfaces. The Bayesian approach to surface estimation relies on a likelihood term, which ties the surface estimate to the input data, and the prior...2004
231 Henderson, Thomas C.Implementing multi-sensor systems in a functional languageWe discuss a methodology for configuring systems of sensors using a functional language. To date no such general methodology exists, and existing multi-sensor systems have been hand-crafted around a particular application. Our main point is that the use of abstraction and of functional language fe...Multi-sensor systems; Multisensor systems1984
232 Riloff, Ellen M.OpinionFinder: a system for subjectivity analysisOpinionFinder is a system that performs subjectivity analysis, automatically identifying when opinions, sentiments, speculations and other private states are present in text. Specifically, OpinionFinder aims to identify subjective sentences and to mark various aspects of the subjectivity in the...OpinionFinder; Subjectivity analysis2005
233 Horch, Kenneth W.Selective activation of muscle groups in the feline hindlimb thorough electrical microstimulation of the ventral lumbo-sacral spinal cordSelective activation of muscle groups in the feline hindlimb by electrical stimulation of the ventral lumbo-sacral spinal cord was investigated. Spinal cord segments L5 to S1 were mapped using a penetrating tungsten needle electrode. Locations that produced isolated contraction of quadriceps, ti...Functional electrical stimulation; Motor pools; Spinal chord stimulation2000
234 Carter, Tony M.The path programmable logic (PPL) user's manualThis manual describes the primitive NMOS path programmable logic cells currently in use at the University of Utah. It contains detailed descriptions, schematics and composite layout of all cells. Also included are PPL programming rules as well as layout design rules for each cell set.1982
235 Hansen, Charles D.; Shirley, Peter S.Parallel point reprojectionImprovements in hardware have recently made interactive ray tracing practical for some applications. However, when the scene complexity or rendering algorithm cost is high, the frame rate is too low in practice. Researchers have attempted to solve this problem by caching results from ray tracing an...Point reprojection; Ray tracing2001
236 Lefohn, Aaron; Kniss, Joe; Hansen, Charles D.; Whitaker, Ross T.Interactive deformation and visualization of level set surfaces using graphics hardwareDeformable isosurfaces, implemented with level-set methods, have demonstrated a great potential in visualization for applications such as segmentation, surface process- ing, and surface reconstruction. Their usefulness has been limited, however, by two problems. First, 3D level sets are relativel...Interactive deformation; Deformable isosurfaces; Level-set methods2003-04-16
237 Stringfellow, Gerald B.Electrical properties of nitrogen doped GaPThe electrical properties namely, electron concentration and mobility, have been investigated in the temperature range from 53 to 400 K for undoped and nitrogen-doped VPE GaP.Electron concentration; Ionization energy; Electron mobility1975
238 Hansen, Charles D.CAD-based computer vision: the automatic generation of recognition stragtegiesThree-dimensional model-based computer vision uses geometric models of objects and sensed data to recognize objects in a scene. Likewise, Computer Aided Design (CAD) systems are used to interactively generate three-dimensional models during these fields. Recently, the unification of CAD and vision s...1988
239 Watkins, Gary ScottA real time visible surface algorithmWith the increasing use of computer graphics, a need is growing for a processor capable of displaying solid objects. Environmental simulation and architectural modeling are only two areas that would benefit from such a diplay processor. This dissertation describes an algorithm designed for such a ...Surface algorithm1970
240 Bruderlin, BeatInteraction with constraints in 3D modelingInteractive geometric modeling is an important part of the industrial product design process. This paper describes how constraints can be used to facilitate the interactive definition of geometric objects and assemblies. We have implemented a geometric modeling system that combines the definition o...Interactive geometric modeling; Industrial product design; Geometric constraints1990
241 Myers, Chris J.Timed event/level structuresThis paper presents timed event/level(TEL) structures, an extension to timed event-rule structures, which allows the general use of signal levels and timing in the specification of an asynchronous circuit. TEL structures can express true OR causality, as well as language constructs that are very dif...1997
242 Furse, Cynthia M.; Gandhi, Om P.State of the science regarding RF dosimetry, measurement and certificationCellular telephones and wireless personal communication systems (PCS) are being introduced into society at a very rapid rate. Whereas the present-day cellular telephones in the United States operate at midband transmission frequencies of about 835 MHz (about 900 MHz in Europe), higher frequencies o...RF dosimetry; Cell phone safety1996
243 Johnson, Christopher R.Map3d: scientific visualization program for multichannel time series data on unstructured, three-dimensional meshes. program user's guideThere are many examples in biomedical research of recording time signals with multi-sensor arrays whose elements are arranged in irregular, three-dimensional grids [1, 2, 3, 4]. If the nodes in such arrays can be connected into "surfaces", it is possible to employ linear interpolation techniques to ...Map3D; Multi-sensor arrays; Scientific visualization; Multichannel time series data; Three-dimensional meshes1994
244 Smith, Kent F.Automatic rapid prototyping of semi-custom VLSI circuits using FPGAsWe describe a technique for translating semi-custom VLSI circuits automatically, integrating two design environments, into field programmable gate arrays (FPGAs) for rapid and inexpensive prototyping. The VLSI circuits are designed using a cell-matrix based environment that produces chips with densi...Semi-custom; VLSI circuits1994
245 Bedrov, Dmitro; Smith, Grant D.Anomalous pressure dependence of the structure factor in 1,4-polybutadiene melts: a molecular dynamics simulation studyNeutron scattering has shown the first diffraction peak in the structure factor of a 1,4-polybutadiene melt under compression to move to larger q values as expected but to decrease significantly in intensity. Simulations reveal that this behavior does not result from loss of structure in the polymer...Polymer melts; 1, 4-polybutadiene melts; Pressure; Structure factor2004-07
246 Balasubramonian, RajeevReducing the complexity of the register file in dynamic superscalar processorsDynamic superscalar processors execute multiple instructions out-of-order by looking for independent operations within a large window. The number of physical registers within the processor has a direct impact on the size of this window as most in-flight instructions require a new physical register a...Dynamic superscalar processors; Register file; Instruction-level parallelism; Microarchitecture; Reorder buffer2001
247 Hansen, Charles D.; Whitaker, Ross T.Streaming narrow-band algorithm: interactive computation and visualization of level setsAbstract-Deformable isosurfaces, implemented with level-set methods, have demonstrated a great potential in visualization and computer graphics for applications such as segmentation, surface processing, and physically-based modeling. Their usefulness has been limited, however, by their high computa...2004-07
248 Christensen, Douglas A.; Herron, James N.Rapid clinical diagnostics assays using injection-molded planar waveguidesThe goal of our research program is to develop an evanescent wave immunoassay system that can be used in point-of-care and critical care settings. Several key attributes are required to accomplish this goal: (i) the assay system should be at least as sensitive as present day immunoassays; (ii) assay...Planar waveguides; Creatine phosphokinase MB (CK-MB); Cardiac troponin I (cTnl); Diagnostics; Evanescence; Fluorescence; Human chorionic gonadotropin (hCG)1998
249 Hansen, Charles D.Interactive texture-based volume rendering for large data setsVisualization is an integral part of scientific computation and simulation. State-of-the-art simulations of physical systems can generate terabytes to petabytes of time-varying data where a single time step can contain more than a gigabyte of data per variable. As memory sizes continue to increase, ...Parallel rendering; Volume rendering; TRex2001
250 Normann, Richard A.; Campbell, Patrick K.; Jones, Kelly E.; Huber, Robert J.; Horch, Kenneth W.Silicon-based, three-dimensional neural interface: manufacturing processes for an intracortical electrode arrayA method has been developed for the manufacture of a "three-dimensional" electrode array geometry for chronic intracortical stimulation. This silicon based array consists of a 4.2 x 4.2 x 0.12 mm thick monocrystalline substrate, from which project 100 conductive, silicon needles sharpened to facilit...Electric Stimulation; Electrodes, Implanted; Sensory Cortex; Intracortical Electrode Array1991
226 - 250 of 1,977