1 - 25 of 8
Number of results to display per page
TitleDateSubjectDescription
1 A unified approach to the various formulations of the one-dimensional-turbulence model2010-01One-Dimensional Turbulence model; ODT; Stand-alone ODT models; Predicting turbulence statistics; Nonreacting flows; Reacting flows; Governing equations; Turbulent flow field; Linear Eddy Model; Eddy eventsThe One-Dimensional Turbulence (ODT) model has been successfully applied as a stand-alone model for predicting turbulence statistics in both nonreacting and reacting flows. There are several formulations of the model in the literature, and most of the variable-density formulations do not clearly dis...
2 Analysis of burner operation inside an enclosed ground flare2022Thermo-Acoustic Coupling; Enclosed Flare; LES CFD Model; Noise; Premixed BurnerAn industrial enclosed ground flare used as part of a large refinery project has been analyzed to assess combustion stability and performance under low and high flow conditions. This flare includes a large combustion chamber directly above the burner deck with Low Flow (LF) burners that fire up to 9...
3 Analysis of design and operation of multi-point ground flares2022Multi-point ground flares (MPGF) are used to process large quantities of hydrocarbon gases generated in chemical processing or petrochemical refining. These flares use hundreds of flare burners arranged and fired in a staged fashion. A wind fence surrounds the MPGF to shield the flames from plant op...
4 Integrated treatment of produced water by electrolytic and biological methods2008-03-12integrated treatment; produced water by electrolytic and biological methods; produced waterWhat we got from full scale analysis: 1-Composition of synthetic produced water. 2-Idea to develop an integrated scheme. 3-In other words, we just cannot just use any technique (oxidation or biological) to treat produced water.
5 Modeling sulfur-Nitrogen chemistry indside a claus reaction furnaceThis paper describes a CFD analysis of a Sulfur Recovery Unit (SRU) considering transient turbulent reacting flow inside the SRU. Often, the SRU feedstock includes hydrocarbons together with nitrogen and sulfur species, which react with oxygen in the air to form various emissions including SO2, NH3 ...
6 Predicting Ash Deposition During Oxy-Coal CombustionAn ability to predict and control ash deposition are crucial to effective heat extraction from pulverized fuel (pf) units. Computation Fluid Dynamic (CFD) simulations in conjunction with fuel characterization data have been used in recent years to develop sub-models to predict slagging propensities ...
7 Quantifying flare combustion efficiency using an imaging fourier transform spectrometer2022Mid-wavelength infrared (MWIR) hyperspectral imaging may be used to calculate the flare combustion efficiency from standoff measurements, without requiring any information about the fuel flow rate to the flare. Species column densities are found using a spectroscopic model, which is combined with a ...
8 Simulation of the thermal-acoustic coupling inside an industrial hazardous waste incineratorTo analyze the coupling between combustion reactions and the natural acoustic behavior of a reactor, a transient LES based CFD code has been used. Previous transient analysis of ignition inside large process heaters, of multi-tipped elevated gas flares and waste incinerators has shown the ability of...
1 - 25 of 8